xref: /openbmc/u-boot/include/configs/ea20.h (revision a3b36c84)
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 /*
15  * Board
16  */
17 #define CONFIG_DRIVER_TI_EMAC
18 #define CONFIG_USE_SPIFLASH
19 #define	CONFIG_SYS_USE_NAND
20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
22 #define CONFIG_PREBOOT
23 
24 /*
25  * SoC Configuration
26  */
27 #define CONFIG_MACH_DAVINCI_DA850_EVM
28 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
29 #define CONFIG_SOC_DA850		/* TI DA850 SoC */
30 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
31 #define CONFIG_SYS_OSCIN_FREQ		24000000
32 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
33 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
34 #define CONFIG_SKIP_LOWLEVEL_INIT
35 #define CONFIG_SYS_TEXT_BASE		0xc1080000
36 #define CONFIG_DA8XX_GPIO
37 
38 /*
39  * Memory Info
40  */
41 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
42 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
43 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
44 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
45 
46 /* memtest start addr */
47 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
48 
49 /* memtest will be run on 16MB */
50 #define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
51 
52 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
53 
54 /*
55  * Serial Driver info
56  */
57 #define CONFIG_SYS_NS16550_SERIAL
58 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
59 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
60 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
61 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
62 
63 #define CONFIG_SPI
64 #define CONFIG_DAVINCI_SPI
65 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
66 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
67 #define CONFIG_SF_DEFAULT_SPEED		30000000
68 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
69 
70 /*
71  * I2C Configuration
72  */
73 #define CONFIG_SYS_I2C
74 #define CONFIG_SYS_I2C_DAVINCI
75 #define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
76 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
77 
78 /*
79  * Network & Ethernet Configuration
80  */
81 #ifdef CONFIG_DRIVER_TI_EMAC
82 #define CONFIG_MII
83 #define CONFIG_BOOTP_DNS
84 #define CONFIG_BOOTP_DNS2
85 #define CONFIG_BOOTP_SEND_HOSTNAME
86 #define CONFIG_NET_RETRY_COUNT	10
87 #endif
88 
89 #ifdef CONFIG_USE_SPIFLASH
90 #define CONFIG_ENV_SIZE			(8 << 10)
91 #define CONFIG_ENV_OFFSET		0x80000
92 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
93 #endif
94 
95 #if defined(CONFIG_VIDEO)
96 #define CONFIG_VIDEO_DA8XX
97 #define CONFIG_SPLASH_SCREEN_ALIGN
98 #define CONFIG_VIDEO_LOGO
99 #define CONFIG_VIDEO_BMP_RLE8
100 #define CONFIG_VIDEO_BMP_LOGO
101 #endif
102 
103 /*
104  * U-Boot general configuration
105  */
106 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
107 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
108 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
109 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
110 #define CONFIG_AUTO_COMPLETE
111 #define CONFIG_CMDLINE_EDITING
112 #define CONFIG_SYS_LONGHELP
113 #define CONFIG_MX_CYCLIC
114 
115 /*
116  * Linux Information
117  */
118 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
119 #define CONFIG_CMDLINE_TAG
120 #define CONFIG_SETUP_MEMORY_TAGS
121 
122 #ifdef CONFIG_CMD_BDI
123 #define CONFIG_CLOCKS
124 #endif
125 
126 #ifndef CONFIG_DRIVER_TI_EMAC
127 #endif
128 
129 /* NAND Setup */
130 #ifdef CONFIG_SYS_USE_NAND
131 #define CONFIG_MTD_DEVICE
132 #define CONFIG_MTD_PARTITIONS
133 
134 #define CONFIG_NAND_DAVINCI
135 #define	CONFIG_SYS_NAND_PAGE_2K
136 #define CONFIG_SYS_NAND_NO_SUBPAGE
137 #define CONFIG_SYS_NAND_CS		2
138 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
139 #undef CONFIG_SYS_NAND_HW_ECC
140 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
141 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
142 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
143 #endif
144 
145 /* SPI Flash */
146 #ifdef CONFIG_USE_SPIFLASH
147 #endif
148 
149 #if !defined(CONFIG_SYS_USE_NAND) && \
150 	!defined(CONFIG_USE_NOR) && \
151 	!defined(CONFIG_USE_SPIFLASH)
152 #define CONFIG_ENV_SIZE		(16 << 10)
153 #endif
154 
155 /* additions for new relocation code, must added to all boards */
156 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
157 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
158 					GENERATED_GBL_DATA_SIZE)
159 /*
160  * Default environment and default scripts
161  * to update uboot and load kernel
162  */
163 
164 #define CONFIG_HOSTNAME ea20
165 #define	CONFIG_EXTRA_ENV_SETTINGS				\
166 	"as=3\0"							\
167 	"netdev=eth0\0"						\
168 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
169 		"nfsroot=${serverip}:${rootpath}\0"			\
170 	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
171 	"nfsroot=${serverip}:${rfsbpath}\0"				\
172 	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
173 	"nfsroot=${serverip}:${testrfspath}\0"				\
174 	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
175 	"0x${ramdisk_addr_r},4M\0"					\
176 	"mtdids=nand0=davinci_nand.0\0"				\
177 	"serverip=192.168.5.249\0"					\
178 	"ipaddr=192.168.5.248\0"					\
179 	"rootpath=/opt/eldk/arm\0"					\
180 	"splashpos=230,180\0"						\
181 	"testrfspath=/opt/eldk/test_arm\0"				\
182 	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
183 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
184 	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
185 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
186 	"addip_sta=setenv bootargs ${bootargs} "			\
187 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
188 		":${hostname}:${netdev}:off panic=1\0"			\
189 	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
190 	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
191 		"else run addip_sta;fi\0"				\
192 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
193 	"addtty=setenv bootargs ${bootargs}"				\
194 		" console=${consoledev},${baudrate}n8\0"		\
195 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
196 	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
197 	"consoledev=ttyS0\0"						\
198 	"loadaddr=c0000014\0"						\
199 	"memory=32M\0"							\
200 	"kernel_addr_r=c0700000\0"					\
201 	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
202 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
203 	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
204 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
205 			"bootm ${kernel_addr_r}\0"			\
206 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
207 		"bootm ${kernel_addr}\0"				\
208 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
209 		"run nfsargs addip addtty addmtd addmisc addmem;"	\
210 		"bootm ${kernel_addr_r}\0"				\
211 	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
212 		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
213 		"bootm ${kernel_addr_r}\0"				\
214 	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
215 		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
216 		"bootm ${kernel_addr_r}\0"				\
217 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
218 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
219 	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
220 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
221 		"ubifsumount; run nandargs addip addtty "		\
222 		"addmtd addmisc addmem;clrlogo;"			\
223 		"bootm ${kernel_addr_r}\0"				\
224 	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
225 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
226 		"ubifsumount; run nandrwargs addip addtty "		\
227 		"addmtd addmisc addmem;clrlogo;"			\
228 		"bootm ${kernel_addr_r}\0"				\
229 	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
230 		" addip addtty addmtd addmisc addmem;"			\
231 		"clrlogo;bootm ${kernel_addr_r}\0"			\
232 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
233 	"load_magic=if sf probe 0;then sf "				\
234 		"read c0000000 0x10000 0x60000;fi\0"			\
235 	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
236 		"if ubifsload c0000014 /boot/u-boot.bin;"		\
237 		"then mw c0000008 ${filesize};else echo Error reading"	\
238 		" u-boot from nand!;fi\0"				\
239 	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
240 		"0x60000;tftp c0000014 ${u-boot};"			\
241 		"mw c0000008 ${filesize};fi\0"				\
242 	"upd=if sf probe 0;then sf erase 10000 60000;"			\
243 		"sf write c0000000 10000 60000;fi\0"			\
244 	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
245 		"sf erase 0 10000;"					\
246 		"sf write 0xc0700000 0 ${filesize};fi\0"		\
247 	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
248 		"if run upd; then echo U-Boot updated;"		\
249 			"else echo Error updating u-boot !;"		\
250 			"echo Board without bootloader !!;"		\
251 		"fi;"							\
252 		"else echo U-Boot not downloaded..exiting;fi\0"	\
253 	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
254 	"bootcmd=run net_testrfs\0"
255 
256 #include <asm/arch/hardware.h>
257 
258 #endif /* __CONFIG_H */
259