1 /* 2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * Based on davinci_dvevm.h. Original Copyrights follow: 5 * 6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * Board 16 */ 17 #define CONFIG_DRIVER_TI_EMAC 18 #define CONFIG_USE_SPIFLASH 19 #define CONFIG_SYS_USE_NAND 20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE 22 #define CONFIG_BOARD_EARLY_INIT_F 23 #define CONFIG_BOARD_LATE_INIT 24 #define CONFIG_VIDEO 25 #define CONFIG_PREBOOT 26 27 /* 28 * SoC Configuration 29 */ 30 #define CONFIG_MACH_DAVINCI_DA850_EVM 31 #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ 32 #define CONFIG_SOC_DA850 /* TI DA850 SoC */ 33 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 34 #define CONFIG_SYS_OSCIN_FREQ 24000000 35 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 36 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 37 #define CONFIG_SKIP_LOWLEVEL_INIT 38 #define CONFIG_SYS_TEXT_BASE 0xc1080000 39 #define CONFIG_DA8XX_GPIO 40 41 /* 42 * Memory Info 43 */ 44 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ 45 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 46 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 47 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 48 49 /* memtest start addr */ 50 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 51 52 /* memtest will be run on 16MB */ 53 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 54 55 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 56 57 /* 58 * Serial Driver info 59 */ 60 #define CONFIG_SYS_NS16550_SERIAL 61 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 62 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ 63 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 64 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 65 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 66 67 #define CONFIG_SPI 68 #define CONFIG_DAVINCI_SPI 69 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE 70 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) 71 #define CONFIG_SF_DEFAULT_SPEED 30000000 72 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 73 74 /* 75 * I2C Configuration 76 */ 77 #define CONFIG_SYS_I2C 78 #define CONFIG_SYS_I2C_DAVINCI 79 #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 80 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ 81 82 /* 83 * Network & Ethernet Configuration 84 */ 85 #ifdef CONFIG_DRIVER_TI_EMAC 86 #define CONFIG_EMAC_MDIO_PHY_NUM 0 87 #define CONFIG_MII 88 #define CONFIG_BOOTP_DNS 89 #define CONFIG_BOOTP_DNS2 90 #define CONFIG_BOOTP_SEND_HOSTNAME 91 #define CONFIG_NET_RETRY_COUNT 10 92 #endif 93 94 #ifdef CONFIG_USE_SPIFLASH 95 #undef CONFIG_ENV_IS_IN_FLASH 96 #undef CONFIG_ENV_IS_IN_NAND 97 #define CONFIG_ENV_IS_IN_SPI_FLASH 98 #define CONFIG_ENV_SIZE (8 << 10) 99 #define CONFIG_ENV_OFFSET 0x80000 100 #define CONFIG_ENV_SECT_SIZE (64 << 10) 101 #define CONFIG_SYS_NO_FLASH 102 #endif 103 104 #if defined(CONFIG_VIDEO) 105 #define CONFIG_VIDEO_DA8XX 106 #define CONFIG_CFB_CONSOLE 107 #define CONFIG_VGA_AS_SINGLE_DEVICE 108 #define CONFIG_SPLASH_SCREEN_ALIGN 109 #define CONFIG_VIDEO_LOGO 110 #define CONFIG_SYS_CONSOLE_INFO_QUIET 111 #define CONFIG_VIDEO_BMP_RLE8 112 #define CONFIG_VIDEO_BMP_LOGO 113 #define CONFIG_CMD_BMP 114 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 115 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 116 #endif 117 118 /* 119 * U-Boot general configuration 120 */ 121 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 122 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 123 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 124 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 125 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 126 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 127 #define CONFIG_AUTO_COMPLETE 128 #define CONFIG_CMDLINE_EDITING 129 #define CONFIG_SYS_LONGHELP 130 #define CONFIG_CRC32_VERIFY 131 #define CONFIG_MX_CYCLIC 132 133 /* 134 * Linux Information 135 */ 136 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 137 #define CONFIG_CMDLINE_TAG 138 #define CONFIG_SETUP_MEMORY_TAGS 139 140 /* 141 * U-Boot commands 142 */ 143 #define CONFIG_CMD_ENV 144 #define CONFIG_CMD_DIAG 145 #define CONFIG_CMD_SAVES 146 147 #ifdef CONFIG_CMD_BDI 148 #define CONFIG_CLOCKS 149 #endif 150 151 #ifndef CONFIG_DRIVER_TI_EMAC 152 #endif 153 154 /* NAND Setup */ 155 #ifdef CONFIG_SYS_USE_NAND 156 #define CONFIG_CMD_NAND 157 158 #define CONFIG_CMD_MTDPARTS 159 #define CONFIG_MTD_DEVICE 160 #define CONFIG_MTD_PARTITIONS 161 #define CONFIG_LZO 162 #define CONFIG_RBTREE 163 #define CONFIG_CMD_UBIFS 164 165 #define CONFIG_NAND_DAVINCI 166 #define CONFIG_SYS_NAND_PAGE_2K 167 #define CONFIG_SYS_NAND_NO_SUBPAGE 168 #define CONFIG_SYS_NAND_CS 2 169 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 170 #undef CONFIG_SYS_NAND_HW_ECC 171 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST 172 #define CONFIG_SYS_NAND_USE_FLASH_BBT 173 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ 174 #endif 175 176 /* SPI Flash */ 177 #ifdef CONFIG_USE_SPIFLASH 178 #endif 179 180 #if !defined(CONFIG_SYS_USE_NAND) && \ 181 !defined(CONFIG_USE_NOR) && \ 182 !defined(CONFIG_USE_SPIFLASH) 183 #define CONFIG_ENV_IS_NOWHERE 184 #define CONFIG_SYS_NO_FLASH 185 #define CONFIG_ENV_SIZE (16 << 10) 186 #undef CONFIG_CMD_ENV 187 #endif 188 189 /* additions for new relocation code, must added to all boards */ 190 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 191 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 192 GENERATED_GBL_DATA_SIZE) 193 /* 194 * Default environment and default scripts 195 * to update uboot and load kernel 196 */ 197 198 #define CONFIG_HOSTNAME ea20 199 #define CONFIG_EXTRA_ENV_SETTINGS \ 200 "as=3\0" \ 201 "netdev=eth0\0" \ 202 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 203 "nfsroot=${serverip}:${rootpath}\0" \ 204 "rfsbargs=setenv bootargs root=/dev/nfs rw " \ 205 "nfsroot=${serverip}:${rfsbpath}\0" \ 206 "testrfsargs=setenv bootargs root=/dev/nfs rw " \ 207 "nfsroot=${serverip}:${testrfspath}\0" \ 208 "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ 209 "0x${ramdisk_addr_r},4M\0" \ 210 "mtdids=nand0=davinci_nand.0\0" \ 211 "serverip=192.168.5.249\0" \ 212 "ipaddr=192.168.5.248\0" \ 213 "rootpath=/opt/eldk/arm\0" \ 214 "splashpos=230,180\0" \ 215 "testrfspath=/opt/eldk/test_arm\0" \ 216 "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ 217 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 218 "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ 219 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 220 "addip_sta=setenv bootargs ${bootargs} " \ 221 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 222 ":${hostname}:${netdev}:off panic=1\0" \ 223 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 224 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 225 "else run addip_sta;fi\0" \ 226 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 227 "addtty=setenv bootargs ${bootargs}" \ 228 " console=${consoledev},${baudrate}n8\0" \ 229 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 230 "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ 231 "consoledev=ttyS0\0" \ 232 "loadaddr=c0000014\0" \ 233 "memory=32M\0" \ 234 "kernel_addr_r=c0700000\0" \ 235 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 236 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 237 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \ 238 "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ 239 "bootm ${kernel_addr_r}\0" \ 240 "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ 241 "bootm ${kernel_addr}\0" \ 242 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 243 "run nfsargs addip addtty addmtd addmisc addmem;" \ 244 "bootm ${kernel_addr_r}\0" \ 245 "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ 246 "run rfsbargs addip addtty addmtd addmisc addmem; " \ 247 "bootm ${kernel_addr_r}\0" \ 248 "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ 249 "run testrfsargs addip addtty addmtd addmisc addmem; " \ 250 "bootm ${kernel_addr_r}\0" \ 251 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 252 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 253 "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 254 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 255 "ubifsumount; run nandargs addip addtty " \ 256 "addmtd addmisc addmem;clrlogo;" \ 257 "bootm ${kernel_addr_r}\0" \ 258 "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 259 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 260 "ubifsumount; run nandrwargs addip addtty " \ 261 "addmtd addmisc addmem;clrlogo;" \ 262 "bootm ${kernel_addr_r}\0" \ 263 "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ 264 " addip addtty addmtd addmisc addmem;" \ 265 "clrlogo;bootm ${kernel_addr_r}\0" \ 266 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 267 "load_magic=if sf probe 0;then sf " \ 268 "read c0000000 0x10000 0x60000;fi\0" \ 269 "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 270 "if ubifsload c0000014 /boot/u-boot.bin;" \ 271 "then mw c0000008 ${filesize};else echo Error reading" \ 272 " u-boot from nand!;fi\0" \ 273 "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ 274 "0x60000;tftp c0000014 ${u-boot};" \ 275 "mw c0000008 ${filesize};fi\0" \ 276 "upd=if sf probe 0;then sf erase 10000 60000;" \ 277 "sf write c0000000 10000 60000;fi\0" \ 278 "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ 279 "sf erase 0 10000;" \ 280 "sf write 0xc0700000 0 ${filesize};fi\0" \ 281 "ubootupd_net=if run load_net;then echo Updating u-boot;" \ 282 "if run upd; then echo U-Boot updated;" \ 283 "else echo Error updating u-boot !;" \ 284 "echo Board without bootloader !!;" \ 285 "fi;" \ 286 "else echo U-Boot not downloaded..exiting;fi\0" \ 287 "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ 288 "bootcmd=run net_testrfs\0" 289 290 #endif /* __CONFIG_H */ 291