xref: /openbmc/u-boot/include/configs/ea20.h (revision 278b90ce)
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 /*
15  * Board
16  */
17 #define CONFIG_DRIVER_TI_EMAC
18 #define CONFIG_USE_SPIFLASH
19 #define	CONFIG_SYS_USE_NAND
20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
22 #define CONFIG_PREBOOT
23 
24 /*
25  * SoC Configuration
26  */
27 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
28 #define CONFIG_SYS_OSCIN_FREQ		24000000
29 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
30 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
31 #define CONFIG_SKIP_LOWLEVEL_INIT
32 #define CONFIG_DA8XX_GPIO
33 
34 /*
35  * Memory Info
36  */
37 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
38 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
39 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
40 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
41 
42 /* memtest start addr */
43 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
44 
45 /* memtest will be run on 16MB */
46 #define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
47 
48 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
49 
50 /*
51  * Serial Driver info
52  */
53 #define CONFIG_SYS_NS16550_SERIAL
54 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
55 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
56 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
57 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
58 
59 #define CONFIG_SPI
60 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
61 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
62 #define CONFIG_SF_DEFAULT_SPEED		30000000
63 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
64 
65 /*
66  * I2C Configuration
67  */
68 #define CONFIG_SYS_I2C
69 #define CONFIG_SYS_I2C_DAVINCI
70 #define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
71 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
72 
73 /*
74  * Network & Ethernet Configuration
75  */
76 #ifdef CONFIG_DRIVER_TI_EMAC
77 #define CONFIG_MII
78 #define CONFIG_BOOTP_DNS
79 #define CONFIG_BOOTP_DNS2
80 #define CONFIG_BOOTP_SEND_HOSTNAME
81 #define CONFIG_NET_RETRY_COUNT	10
82 #endif
83 
84 #ifdef CONFIG_USE_SPIFLASH
85 #define CONFIG_ENV_SIZE			(8 << 10)
86 #define CONFIG_ENV_OFFSET		0x80000
87 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
88 #endif
89 
90 #if defined(CONFIG_VIDEO)
91 #define CONFIG_VIDEO_DA8XX
92 #define CONFIG_SPLASH_SCREEN_ALIGN
93 #define CONFIG_VIDEO_LOGO
94 #define CONFIG_VIDEO_BMP_RLE8
95 #define CONFIG_VIDEO_BMP_LOGO
96 #endif
97 
98 /*
99  * U-Boot general configuration
100  */
101 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
102 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
103 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
104 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
105 #define CONFIG_AUTO_COMPLETE
106 #define CONFIG_CMDLINE_EDITING
107 #define CONFIG_SYS_LONGHELP
108 #define CONFIG_MX_CYCLIC
109 
110 /*
111  * Linux Information
112  */
113 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
114 #define CONFIG_CMDLINE_TAG
115 #define CONFIG_SETUP_MEMORY_TAGS
116 
117 #ifdef CONFIG_CMD_BDI
118 #define CONFIG_CLOCKS
119 #endif
120 
121 #ifndef CONFIG_DRIVER_TI_EMAC
122 #endif
123 
124 /* NAND Setup */
125 #ifdef CONFIG_SYS_USE_NAND
126 #define CONFIG_MTD_DEVICE
127 #define CONFIG_MTD_PARTITIONS
128 
129 #define CONFIG_NAND_DAVINCI
130 #define	CONFIG_SYS_NAND_PAGE_2K
131 #define CONFIG_SYS_NAND_NO_SUBPAGE
132 #define CONFIG_SYS_NAND_CS		2
133 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
134 #undef CONFIG_SYS_NAND_HW_ECC
135 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
136 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
137 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
138 #endif
139 
140 /* SPI Flash */
141 #ifdef CONFIG_USE_SPIFLASH
142 #endif
143 
144 #if !defined(CONFIG_SYS_USE_NAND) && \
145 	!defined(CONFIG_USE_NOR) && \
146 	!defined(CONFIG_USE_SPIFLASH)
147 #define CONFIG_ENV_SIZE		(16 << 10)
148 #endif
149 
150 /* additions for new relocation code, must added to all boards */
151 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
152 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
153 					GENERATED_GBL_DATA_SIZE)
154 /*
155  * Default environment and default scripts
156  * to update uboot and load kernel
157  */
158 
159 #define CONFIG_HOSTNAME ea20
160 #define	CONFIG_EXTRA_ENV_SETTINGS				\
161 	"as=3\0"							\
162 	"netdev=eth0\0"						\
163 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
164 		"nfsroot=${serverip}:${rootpath}\0"			\
165 	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
166 	"nfsroot=${serverip}:${rfsbpath}\0"				\
167 	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
168 	"nfsroot=${serverip}:${testrfspath}\0"				\
169 	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
170 	"0x${ramdisk_addr_r},4M\0"					\
171 	"mtdids=nand0=davinci_nand.0\0"				\
172 	"serverip=192.168.5.249\0"					\
173 	"ipaddr=192.168.5.248\0"					\
174 	"rootpath=/opt/eldk/arm\0"					\
175 	"splashpos=230,180\0"						\
176 	"testrfspath=/opt/eldk/test_arm\0"				\
177 	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
178 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
179 	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
180 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
181 	"addip_sta=setenv bootargs ${bootargs} "			\
182 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
183 		":${hostname}:${netdev}:off panic=1\0"			\
184 	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
185 	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
186 		"else run addip_sta;fi\0"				\
187 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
188 	"addtty=setenv bootargs ${bootargs}"				\
189 		" console=${consoledev},${baudrate}n8\0"		\
190 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
191 	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
192 	"consoledev=ttyS0\0"						\
193 	"loadaddr=c0000014\0"						\
194 	"memory=32M\0"							\
195 	"kernel_addr_r=c0700000\0"					\
196 	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
197 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
198 	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
199 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
200 			"bootm ${kernel_addr_r}\0"			\
201 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
202 		"bootm ${kernel_addr}\0"				\
203 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
204 		"run nfsargs addip addtty addmtd addmisc addmem;"	\
205 		"bootm ${kernel_addr_r}\0"				\
206 	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
207 		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
208 		"bootm ${kernel_addr_r}\0"				\
209 	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
210 		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
211 		"bootm ${kernel_addr_r}\0"				\
212 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
213 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
214 	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
215 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
216 		"ubifsumount; run nandargs addip addtty "		\
217 		"addmtd addmisc addmem;clrlogo;"			\
218 		"bootm ${kernel_addr_r}\0"				\
219 	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
220 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
221 		"ubifsumount; run nandrwargs addip addtty "		\
222 		"addmtd addmisc addmem;clrlogo;"			\
223 		"bootm ${kernel_addr_r}\0"				\
224 	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
225 		" addip addtty addmtd addmisc addmem;"			\
226 		"clrlogo;bootm ${kernel_addr_r}\0"			\
227 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
228 	"load_magic=if sf probe 0;then sf "				\
229 		"read c0000000 0x10000 0x60000;fi\0"			\
230 	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
231 		"if ubifsload c0000014 /boot/u-boot.bin;"		\
232 		"then mw c0000008 ${filesize};else echo Error reading"	\
233 		" u-boot from nand!;fi\0"				\
234 	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
235 		"0x60000;tftp c0000014 ${u-boot};"			\
236 		"mw c0000008 ${filesize};fi\0"				\
237 	"upd=if sf probe 0;then sf erase 10000 60000;"			\
238 		"sf write c0000000 10000 60000;fi\0"			\
239 	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
240 		"sf erase 0 10000;"					\
241 		"sf write 0xc0700000 0 ${filesize};fi\0"		\
242 	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
243 		"if run upd; then echo U-Boot updated;"		\
244 			"else echo Error updating u-boot !;"		\
245 			"echo Board without bootloader !!;"		\
246 		"fi;"							\
247 		"else echo U-Boot not downloaded..exiting;fi\0"	\
248 	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
249 	"bootcmd=run net_testrfs\0"
250 
251 #include <asm/arch/hardware.h>
252 
253 #endif /* __CONFIG_H */
254