1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 4 * 5 * Based on davinci_dvevm.h. Original Copyrights follow: 6 * 7 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* 14 * Board 15 */ 16 #define CONFIG_DRIVER_TI_EMAC 17 #define CONFIG_USE_SPIFLASH 18 #define CONFIG_SYS_USE_NAND 19 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 20 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE 21 #define CONFIG_PREBOOT 22 23 /* 24 * SoC Configuration 25 */ 26 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 27 #define CONFIG_SYS_OSCIN_FREQ 24000000 28 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 29 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 30 #define CONFIG_SKIP_LOWLEVEL_INIT 31 #define CONFIG_DA8XX_GPIO 32 33 /* 34 * Memory Info 35 */ 36 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ 37 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 38 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 39 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 40 41 /* memtest start addr */ 42 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 43 44 /* memtest will be run on 16MB */ 45 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 46 47 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 48 49 /* 50 * Serial Driver info 51 */ 52 #define CONFIG_SYS_NS16550_SERIAL 53 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 54 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ 55 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 56 57 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE 58 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) 59 #define CONFIG_SF_DEFAULT_SPEED 30000000 60 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 61 62 /* 63 * I2C Configuration 64 */ 65 #define CONFIG_SYS_I2C 66 #define CONFIG_SYS_I2C_DAVINCI 67 #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 68 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ 69 70 /* 71 * Network & Ethernet Configuration 72 */ 73 #ifdef CONFIG_DRIVER_TI_EMAC 74 #define CONFIG_MII 75 #define CONFIG_BOOTP_DNS2 76 #define CONFIG_BOOTP_SEND_HOSTNAME 77 #define CONFIG_NET_RETRY_COUNT 10 78 #endif 79 80 #ifdef CONFIG_USE_SPIFLASH 81 #define CONFIG_ENV_SIZE (8 << 10) 82 #define CONFIG_ENV_OFFSET 0x80000 83 #define CONFIG_ENV_SECT_SIZE (64 << 10) 84 #endif 85 86 #if defined(CONFIG_VIDEO) 87 #define CONFIG_VIDEO_DA8XX 88 #define CONFIG_SPLASH_SCREEN_ALIGN 89 #define CONFIG_VIDEO_LOGO 90 #define CONFIG_VIDEO_BMP_RLE8 91 #define CONFIG_VIDEO_BMP_LOGO 92 #endif 93 94 /* 95 * U-Boot general configuration 96 */ 97 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 98 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 99 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 100 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 101 #define CONFIG_MX_CYCLIC 102 103 /* 104 * Linux Information 105 */ 106 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 107 #define CONFIG_CMDLINE_TAG 108 #define CONFIG_SETUP_MEMORY_TAGS 109 110 #ifdef CONFIG_CMD_BDI 111 #define CONFIG_CLOCKS 112 #endif 113 114 /* NAND Setup */ 115 #ifdef CONFIG_SYS_USE_NAND 116 #define CONFIG_MTD_DEVICE 117 #define CONFIG_MTD_PARTITIONS 118 119 #define CONFIG_NAND_DAVINCI 120 #define CONFIG_SYS_NAND_PAGE_2K 121 #define CONFIG_SYS_NAND_NO_SUBPAGE 122 #define CONFIG_SYS_NAND_CS 2 123 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 124 #undef CONFIG_SYS_NAND_HW_ECC 125 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST 126 #define CONFIG_SYS_NAND_USE_FLASH_BBT 127 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ 128 #endif 129 130 #if !defined(CONFIG_SYS_USE_NAND) && \ 131 !defined(CONFIG_USE_NOR) && \ 132 !defined(CONFIG_USE_SPIFLASH) 133 #define CONFIG_ENV_SIZE (16 << 10) 134 #endif 135 136 /* additions for new relocation code, must added to all boards */ 137 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 138 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 139 GENERATED_GBL_DATA_SIZE) 140 /* 141 * Default environment and default scripts 142 * to update uboot and load kernel 143 */ 144 145 #define CONFIG_HOSTNAME "ea20" 146 #define CONFIG_EXTRA_ENV_SETTINGS \ 147 "as=3\0" \ 148 "netdev=eth0\0" \ 149 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 150 "nfsroot=${serverip}:${rootpath}\0" \ 151 "rfsbargs=setenv bootargs root=/dev/nfs rw " \ 152 "nfsroot=${serverip}:${rfsbpath}\0" \ 153 "testrfsargs=setenv bootargs root=/dev/nfs rw " \ 154 "nfsroot=${serverip}:${testrfspath}\0" \ 155 "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ 156 "0x${ramdisk_addr_r},4M\0" \ 157 "mtdids=nand0=davinci_nand.0\0" \ 158 "serverip=192.168.5.249\0" \ 159 "ipaddr=192.168.5.248\0" \ 160 "rootpath=/opt/eldk/arm\0" \ 161 "splashpos=230,180\0" \ 162 "testrfspath=/opt/eldk/test_arm\0" \ 163 "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ 164 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 165 "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ 166 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 167 "addip_sta=setenv bootargs ${bootargs} " \ 168 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 169 ":${hostname}:${netdev}:off panic=1\0" \ 170 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 171 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 172 "else run addip_sta;fi\0" \ 173 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 174 "addtty=setenv bootargs ${bootargs}" \ 175 " console=${consoledev},${baudrate}n8\0" \ 176 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 177 "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ 178 "consoledev=ttyS0\0" \ 179 "loadaddr=c0000014\0" \ 180 "memory=32M\0" \ 181 "kernel_addr_r=c0700000\0" \ 182 "hostname=" CONFIG_HOSTNAME "\0" \ 183 "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ 184 "ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0" \ 185 "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ 186 "bootm ${kernel_addr_r}\0" \ 187 "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ 188 "bootm ${kernel_addr}\0" \ 189 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 190 "run nfsargs addip addtty addmtd addmisc addmem;" \ 191 "bootm ${kernel_addr_r}\0" \ 192 "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ 193 "run rfsbargs addip addtty addmtd addmisc addmem; " \ 194 "bootm ${kernel_addr_r}\0" \ 195 "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ 196 "run testrfsargs addip addtty addmtd addmisc addmem; " \ 197 "bootm ${kernel_addr_r}\0" \ 198 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 199 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 200 "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 201 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 202 "ubifsumount; run nandargs addip addtty " \ 203 "addmtd addmisc addmem;clrlogo;" \ 204 "bootm ${kernel_addr_r}\0" \ 205 "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 206 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 207 "ubifsumount; run nandrwargs addip addtty " \ 208 "addmtd addmisc addmem;clrlogo;" \ 209 "bootm ${kernel_addr_r}\0" \ 210 "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ 211 " addip addtty addmtd addmisc addmem;" \ 212 "clrlogo;bootm ${kernel_addr_r}\0" \ 213 "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ 214 "load_magic=if sf probe 0;then sf " \ 215 "read c0000000 0x10000 0x60000;fi\0" \ 216 "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 217 "if ubifsload c0000014 /boot/u-boot.bin;" \ 218 "then mw c0000008 ${filesize};else echo Error reading" \ 219 " u-boot from nand!;fi\0" \ 220 "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ 221 "0x60000;tftp c0000014 ${u-boot};" \ 222 "mw c0000008 ${filesize};fi\0" \ 223 "upd=if sf probe 0;then sf erase 10000 60000;" \ 224 "sf write c0000000 10000 60000;fi\0" \ 225 "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ 226 "sf erase 0 10000;" \ 227 "sf write 0xc0700000 0 ${filesize};fi\0" \ 228 "ubootupd_net=if run load_net;then echo Updating u-boot;" \ 229 "if run upd; then echo U-Boot updated;" \ 230 "else echo Error updating u-boot !;" \ 231 "echo Board without bootloader !!;" \ 232 "fi;" \ 233 "else echo U-Boot not downloaded..exiting;fi\0" \ 234 "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ 235 "bootcmd=run net_testrfs\0" 236 237 #include <asm/arch/hardware.h> 238 239 #endif /* __CONFIG_H */ 240