1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DS109_H 13 #define _CONFIG_DS109_H 14 15 /* 16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types 17 * from Linus' kernel.org tree. This hasn't been updated primarily due to 18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it 19 * here. 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_SYNOLOGY 23 #error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_SYNOLOGY 527 26 #endif 27 28 /* 29 * High Level Configuration Options (easy to change) 30 */ 31 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 32 #define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY 33 34 /* 35 * Commands configuration 36 */ 37 #define CONFIG_CMD_EXT2 38 #define CONFIG_CMD_FAT 39 40 /* 41 * mv-plug-common.h should be defined after CMD configs since it used them 42 * to enable certain macros 43 */ 44 #include "mv-plug-common.h" 45 46 /* 47 * Environment variables configurations 48 */ 49 #ifdef CONFIG_SPI_FLASH 50 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 51 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 52 #else 53 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 54 #endif 55 56 #ifdef CONFIG_CMD_SF 57 #define CONFIG_HARD_SPI 1 58 #define CONFIG_KIRKWOOD_SPI 1 59 #define CONFIG_ENV_SPI_BUS 0 60 #define CONFIG_ENV_SPI_CS 0 61 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 62 #endif 63 64 /* 65 * max 4k env size is enough, but in case of nand 66 * it has to be rounded to sector size 67 */ 68 #define CONFIG_ENV_SIZE 0x10000 69 #define CONFIG_ENV_ADDR 0x3d0000 70 #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ 71 72 /* 73 * Default environment variables 74 */ 75 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 76 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 77 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 78 "bootm 0x6400000;" 79 80 #define CONFIG_EXTRA_ENV_SETTINGS \ 81 "x_bootcmd_ethernet=ping 192.168.1.2\0" \ 82 "x_bootcmd_usb=usb start\0" \ 83 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 84 "x_bootargs=console=ttyS0,115200\0" \ 85 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ 86 "ipaddr=192.168.1.5\0" 87 88 /* 89 * Ethernet Driver configuration 90 */ 91 #ifdef CONFIG_CMD_NET 92 #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ 93 #define CONFIG_PHY_BASE_ADR 8 94 #endif /* CONFIG_CMD_NET */ 95 96 /* 97 * SATA Driver configuration 98 */ 99 #ifdef CONFIG_MVSATA_IDE 100 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 101 #endif /*CONFIG_MVSATA_IDE*/ 102 103 #endif /* _CONFIG_DS109_H */ 104