1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DS109_H 13 #define _CONFIG_DS109_H 14 15 /* Provide the MACH_TYPE value that the vendor kernel requires. */ 16 #define CONFIG_MACH_TYPE 527 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_EXT2 27 28 /* 29 * mv-plug-common.h should be defined after CMD configs since it used them 30 * to enable certain macros 31 */ 32 #include "mv-plug-common.h" 33 34 /* 35 * Environment variables configurations 36 */ 37 #ifdef CONFIG_SPI_FLASH 38 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 39 #endif 40 41 #ifdef CONFIG_CMD_SF 42 #define CONFIG_HARD_SPI 1 43 #define CONFIG_ENV_SPI_BUS 0 44 #define CONFIG_ENV_SPI_CS 0 45 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 46 #endif 47 48 /* 49 * max 4k env size is enough, but in case of nand 50 * it has to be rounded to sector size 51 */ 52 #define CONFIG_ENV_SIZE 0x10000 53 #define CONFIG_ENV_ADDR 0x3d0000 54 #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ 55 56 /* 57 * Default environment variables 58 */ 59 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 60 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 61 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 62 "bootm 0x6400000;" 63 64 #define CONFIG_EXTRA_ENV_SETTINGS \ 65 "x_bootcmd_ethernet=ping 192.168.1.2\0" \ 66 "x_bootcmd_usb=usb start\0" \ 67 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 68 "x_bootargs=console=ttyS0,115200\0" \ 69 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ 70 "ipaddr=192.168.1.5\0" 71 72 /* 73 * Ethernet Driver configuration 74 */ 75 #ifdef CONFIG_CMD_NET 76 #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ 77 #define CONFIG_PHY_BASE_ADR 8 78 #endif /* CONFIG_CMD_NET */ 79 80 /* 81 * SATA Driver configuration 82 */ 83 #ifdef CONFIG_MVSATA_IDE 84 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 85 #endif /*CONFIG_MVSATA_IDE*/ 86 87 #endif /* _CONFIG_DS109_H */ 88