1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2011 4 * Jason Cooper <u-boot@lakedaemon.net> 5 * 6 * Based on work by: 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Siddarth Gore <gores@marvell.com> 9 */ 10 11 #ifndef _CONFIG_DS109_H 12 #define _CONFIG_DS109_H 13 14 /* Provide the MACH_TYPE value that the vendor kernel requires. */ 15 #define CONFIG_MACH_TYPE 527 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 22 /* 23 * Commands configuration 24 */ 25 #define CONFIG_CMD_EXT2 26 27 /* 28 * mv-plug-common.h should be defined after CMD configs since it used them 29 * to enable certain macros 30 */ 31 #include "mv-plug-common.h" 32 33 /* 34 * Environment variables configurations 35 */ 36 #ifdef CONFIG_SPI_FLASH 37 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 38 #endif 39 40 #ifdef CONFIG_CMD_SF 41 #define CONFIG_HARD_SPI 1 42 #define CONFIG_ENV_SPI_BUS 0 43 #define CONFIG_ENV_SPI_CS 0 44 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 45 #endif 46 47 /* 48 * max 4k env size is enough, but in case of nand 49 * it has to be rounded to sector size 50 */ 51 #define CONFIG_ENV_SIZE 0x10000 52 #define CONFIG_ENV_ADDR 0x3d0000 53 #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ 54 55 /* 56 * Default environment variables 57 */ 58 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 59 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 60 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 61 "bootm 0x6400000;" 62 63 #define CONFIG_EXTRA_ENV_SETTINGS \ 64 "x_bootcmd_ethernet=ping 192.168.1.2\0" \ 65 "x_bootcmd_usb=usb start\0" \ 66 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 67 "x_bootargs=console=ttyS0,115200\0" \ 68 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ 69 "ipaddr=192.168.1.5\0" 70 71 /* 72 * Ethernet Driver configuration 73 */ 74 #ifdef CONFIG_CMD_NET 75 #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ 76 #define CONFIG_PHY_BASE_ADR 8 77 #endif /* CONFIG_CMD_NET */ 78 79 /* 80 * SATA Driver configuration 81 */ 82 #ifdef CONFIG_MVSATA_IDE 83 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 84 #endif /*CONFIG_MVSATA_IDE*/ 85 86 #endif /* _CONFIG_DS109_H */ 87