1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DS109_H 13 #define _CONFIG_DS109_H 14 15 /* Provide the MACH_TYPE value that the vendor kernel requires. */ 16 #define CONFIG_MACH_TYPE 527 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_EXT2 27 28 /* 29 * mv-plug-common.h should be defined after CMD configs since it used them 30 * to enable certain macros 31 */ 32 #include "mv-plug-common.h" 33 34 /* 35 * Environment variables configurations 36 */ 37 #ifdef CONFIG_SPI_FLASH 38 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 39 #endif 40 41 #ifdef CONFIG_CMD_SF 42 #define CONFIG_HARD_SPI 1 43 #define CONFIG_KIRKWOOD_SPI 1 44 #define CONFIG_ENV_SPI_BUS 0 45 #define CONFIG_ENV_SPI_CS 0 46 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 47 #endif 48 49 /* 50 * max 4k env size is enough, but in case of nand 51 * it has to be rounded to sector size 52 */ 53 #define CONFIG_ENV_SIZE 0x10000 54 #define CONFIG_ENV_ADDR 0x3d0000 55 #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ 56 57 /* 58 * Default environment variables 59 */ 60 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 61 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 62 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 63 "bootm 0x6400000;" 64 65 #define CONFIG_EXTRA_ENV_SETTINGS \ 66 "x_bootcmd_ethernet=ping 192.168.1.2\0" \ 67 "x_bootcmd_usb=usb start\0" \ 68 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 69 "x_bootargs=console=ttyS0,115200\0" \ 70 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ 71 "ipaddr=192.168.1.5\0" 72 73 /* 74 * Ethernet Driver configuration 75 */ 76 #ifdef CONFIG_CMD_NET 77 #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ 78 #define CONFIG_PHY_BASE_ADR 8 79 #endif /* CONFIG_CMD_NET */ 80 81 /* 82 * SATA Driver configuration 83 */ 84 #ifdef CONFIG_MVSATA_IDE 85 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 86 #endif /*CONFIG_MVSATA_IDE*/ 87 88 #endif /* _CONFIG_DS109_H */ 89