1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DS109_H 13 #define _CONFIG_DS109_H 14 15 /* Provide the MACH_TYPE value that the vendor kernel requires. */ 16 #define CONFIG_MACH_TYPE 527 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_EXT2 27 #define CONFIG_CMD_FAT 28 29 /* 30 * mv-plug-common.h should be defined after CMD configs since it used them 31 * to enable certain macros 32 */ 33 #include "mv-plug-common.h" 34 35 /* 36 * Environment variables configurations 37 */ 38 #ifdef CONFIG_SPI_FLASH 39 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 40 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 41 #else 42 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 43 #endif 44 45 #ifdef CONFIG_CMD_SF 46 #define CONFIG_HARD_SPI 1 47 #define CONFIG_KIRKWOOD_SPI 1 48 #define CONFIG_ENV_SPI_BUS 0 49 #define CONFIG_ENV_SPI_CS 0 50 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 51 #endif 52 53 /* 54 * max 4k env size is enough, but in case of nand 55 * it has to be rounded to sector size 56 */ 57 #define CONFIG_ENV_SIZE 0x10000 58 #define CONFIG_ENV_ADDR 0x3d0000 59 #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ 60 61 /* 62 * Default environment variables 63 */ 64 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 65 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 66 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 67 "bootm 0x6400000;" 68 69 #define CONFIG_EXTRA_ENV_SETTINGS \ 70 "x_bootcmd_ethernet=ping 192.168.1.2\0" \ 71 "x_bootcmd_usb=usb start\0" \ 72 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 73 "x_bootargs=console=ttyS0,115200\0" \ 74 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ 75 "ipaddr=192.168.1.5\0" 76 77 /* 78 * Ethernet Driver configuration 79 */ 80 #ifdef CONFIG_CMD_NET 81 #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ 82 #define CONFIG_PHY_BASE_ADR 8 83 #endif /* CONFIG_CMD_NET */ 84 85 /* 86 * SATA Driver configuration 87 */ 88 #ifdef CONFIG_MVSATA_IDE 89 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 90 #endif /*CONFIG_MVSATA_IDE*/ 91 92 #endif /* _CONFIG_DS109_H */ 93