1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DREAMPLUG_H 13 #define _CONFIG_DREAMPLUG_H 14 15 /* 16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types 17 * from Linus' kernel.org tree. This hasn't been updated primarily due to 18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it 19 * here. 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_DREAMPLUG 23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_DREAMPLUG 3550 26 #endif 27 28 /* 29 * Version number information 30 */ 31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" 32 33 /* 34 * High Level Configuration Options (easy to change) 35 */ 36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 37 #define CONFIG_KW88F6281 1 /* SOC Name */ 38 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG 39 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 40 #define CONFIG_SYS_GENERIC_BOARD 41 42 /* Add target to build it automatically upon "make" */ 43 #define CONFIG_BUILD_TARGET "u-boot.kwb" 44 45 /* 46 * Commands configuration 47 */ 48 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 49 #include <config_cmd_default.h> 50 #define CONFIG_CMD_DHCP 51 #define CONFIG_CMD_ENV 52 #define CONFIG_CMD_FAT 53 #define CONFIG_CMD_SF 54 #define CONFIG_CMD_PING 55 #define CONFIG_CMD_USB 56 #define CONFIG_CMD_IDE 57 #define CONFIG_CMD_DATE 58 59 /* 60 * mv-common.h should be defined after CMD configs since it used them 61 * to enable certain macros 62 */ 63 #include "mv-common.h" 64 65 /* 66 * Environment variables configurations 67 */ 68 #ifdef CONFIG_SPI_FLASH 69 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 70 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 71 #else 72 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 73 #endif 74 75 #ifdef CONFIG_CMD_SF 76 #define CONFIG_HARD_SPI 1 77 #define CONFIG_KIRKWOOD_SPI 1 78 #define CONFIG_SPI_FLASH_MACRONIX 1 79 #define CONFIG_ENV_SPI_BUS 0 80 #define CONFIG_ENV_SPI_CS 0 81 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 82 #endif 83 84 /* 85 * max 4k env size is enough, but in case of nand 86 * it has to be rounded to sector size 87 */ 88 #define CONFIG_ENV_SIZE 0x1000 /* 4k */ 89 #define CONFIG_ENV_ADDR 0x100000 90 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */ 91 92 /* 93 * Default environment variables 94 */ 95 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 96 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 97 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 98 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 99 "bootm 0x6400000;" 100 101 #define CONFIG_EXTRA_ENV_SETTINGS \ 102 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 103 "x_bootcmd_usb=usb start\0" \ 104 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 105 "x_bootargs=console=ttyS0,115200\0" \ 106 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" 107 108 /* 109 * Ethernet Driver configuration 110 */ 111 #ifdef CONFIG_CMD_NET 112 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 113 #define CONFIG_PHY_BASE_ADR 0 114 #endif /* CONFIG_CMD_NET */ 115 116 /* 117 * SATA Driver configuration 118 */ 119 #ifdef CONFIG_MVSATA_IDE 120 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 121 #endif /*CONFIG_MVSATA_IDE*/ 122 123 /* 124 * RTC driver configuration 125 */ 126 #ifdef CONFIG_CMD_DATE 127 #define CONFIG_RTC_MV 128 #endif /* CONFIG_CMD_DATE */ 129 130 #define CONFIG_SYS_ALT_MEMTEST 131 132 /* 133 * display enhanced info about the cpu at boot. 134 */ 135 #define CONFIG_DISPLAY_CPUINFO 136 137 #define CONFIG_OF_LIBFDT 138 139 #endif /* _CONFIG_DREAMPLUG_H */ 140