xref: /openbmc/u-boot/include/configs/dreamplug.h (revision 9b8d9ec41a6f161d53d32bf71f79332236b44ba1)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2011
4  * Jason Cooper <u-boot@lakedaemon.net>
5  *
6  * Based on work by:
7  * Marvell Semiconductor <www.marvell.com>
8  * Written-by: Siddarth Gore <gores@marvell.com>
9  */
10 
11 #ifndef _CONFIG_DREAMPLUG_H
12 #define _CONFIG_DREAMPLUG_H
13 
14 /*
15  * High Level Configuration Options (easy to change)
16  */
17 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
18 #define CONFIG_MACH_TYPE	MACH_TYPE_DREAMPLUG
19 
20 /*
21  * Commands configuration
22  */
23 
24 /*
25  * mv-plug-common.h should be defined after CMD configs since it used them
26  * to enable certain macros
27  */
28 #include "mv-plug-common.h"
29 
30 /*
31  *  Environment variables configurations
32  */
33 #ifdef CONFIG_SPI_FLASH
34 #define CONFIG_ENV_SECT_SIZE		0x10000	/* 64k */
35 #endif
36 
37 #ifdef CONFIG_CMD_SF
38 #endif
39 
40 /*
41  * max 4k env size is enough, but in case of nand
42  * it has to be rounded to sector size
43  */
44 #define CONFIG_ENV_SIZE			0x1000  /* 4k */
45 #define CONFIG_ENV_ADDR			0x100000
46 #define CONFIG_ENV_OFFSET		0x100000 /* env starts here */
47 
48 /*
49  * Default environment variables
50  */
51 #define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
52 	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
53 	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
54 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
55 	"bootm 0x6400000;"
56 
57 #define CONFIG_EXTRA_ENV_SETTINGS	\
58 	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
59 	"x_bootcmd_usb=usb start\0"	\
60 	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
61 	"x_bootargs=console=ttyS0,115200\0"	\
62 	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
63 
64 /*
65  * Ethernet Driver configuration
66  */
67 #ifdef CONFIG_CMD_NET
68 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
69 #define CONFIG_PHY_BASE_ADR	0
70 #endif /* CONFIG_CMD_NET */
71 
72 /*
73  * SATA Driver configuration
74  */
75 #ifdef CONFIG_MVSATA_IDE
76 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
77 #endif /*CONFIG_MVSATA_IDE*/
78 
79 #endif /* _CONFIG_DREAMPLUG_H */
80