1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DREAMPLUG_H 13 #define _CONFIG_DREAMPLUG_H 14 15 /* 16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types 17 * from Linus' kernel.org tree. This hasn't been updated primarily due to 18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it 19 * here. 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_DREAMPLUG 23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_DREAMPLUG 3550 26 #endif 27 28 /* 29 * Version number information 30 */ 31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" 32 33 /* 34 * High Level Configuration Options (easy to change) 35 */ 36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 37 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG 38 39 /* 40 * Commands configuration 41 */ 42 #define CONFIG_CMD_EXT2 43 #define CONFIG_CMD_FAT 44 45 /* 46 * mv-plug-common.h should be defined after CMD configs since it used them 47 * to enable certain macros 48 */ 49 #include "mv-plug-common.h" 50 51 /* 52 * Environment variables configurations 53 */ 54 #ifdef CONFIG_SPI_FLASH 55 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 56 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 57 #else 58 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 59 #endif 60 61 #ifdef CONFIG_CMD_SF 62 #define CONFIG_HARD_SPI 1 63 #define CONFIG_KIRKWOOD_SPI 1 64 #define CONFIG_ENV_SPI_BUS 0 65 #define CONFIG_ENV_SPI_CS 0 66 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 67 #endif 68 69 /* 70 * max 4k env size is enough, but in case of nand 71 * it has to be rounded to sector size 72 */ 73 #define CONFIG_ENV_SIZE 0x1000 /* 4k */ 74 #define CONFIG_ENV_ADDR 0x100000 75 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */ 76 77 /* 78 * Default environment variables 79 */ 80 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 81 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 82 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 83 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 84 "bootm 0x6400000;" 85 86 #define CONFIG_EXTRA_ENV_SETTINGS \ 87 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 88 "x_bootcmd_usb=usb start\0" \ 89 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 90 "x_bootargs=console=ttyS0,115200\0" \ 91 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" 92 93 /* 94 * Ethernet Driver configuration 95 */ 96 #ifdef CONFIG_CMD_NET 97 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 98 #define CONFIG_PHY_BASE_ADR 0 99 #endif /* CONFIG_CMD_NET */ 100 101 /* 102 * SATA Driver configuration 103 */ 104 #ifdef CONFIG_MVSATA_IDE 105 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 106 #endif /*CONFIG_MVSATA_IDE*/ 107 108 #endif /* _CONFIG_DREAMPLUG_H */ 109