1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2011 4 * Jason Cooper <u-boot@lakedaemon.net> 5 * 6 * Based on work by: 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Siddarth Gore <gores@marvell.com> 9 */ 10 11 #ifndef _CONFIG_DREAMPLUG_H 12 #define _CONFIG_DREAMPLUG_H 13 14 /* 15 * High Level Configuration Options (easy to change) 16 */ 17 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG 19 20 /* 21 * Commands configuration 22 */ 23 24 /* 25 * mv-plug-common.h should be defined after CMD configs since it used them 26 * to enable certain macros 27 */ 28 #include "mv-plug-common.h" 29 30 /* 31 * Environment variables configurations 32 */ 33 #ifdef CONFIG_SPI_FLASH 34 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 35 #endif 36 37 #ifdef CONFIG_CMD_SF 38 #define CONFIG_ENV_SPI_BUS 0 39 #define CONFIG_ENV_SPI_CS 0 40 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 41 #endif 42 43 /* 44 * max 4k env size is enough, but in case of nand 45 * it has to be rounded to sector size 46 */ 47 #define CONFIG_ENV_SIZE 0x1000 /* 4k */ 48 #define CONFIG_ENV_ADDR 0x100000 49 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */ 50 51 /* 52 * Default environment variables 53 */ 54 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 55 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 56 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 57 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 58 "bootm 0x6400000;" 59 60 #define CONFIG_EXTRA_ENV_SETTINGS \ 61 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 62 "x_bootcmd_usb=usb start\0" \ 63 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 64 "x_bootargs=console=ttyS0,115200\0" \ 65 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" 66 67 /* 68 * Ethernet Driver configuration 69 */ 70 #ifdef CONFIG_CMD_NET 71 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 72 #define CONFIG_PHY_BASE_ADR 0 73 #endif /* CONFIG_CMD_NET */ 74 75 /* 76 * SATA Driver configuration 77 */ 78 #ifdef CONFIG_MVSATA_IDE 79 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 80 #endif /*CONFIG_MVSATA_IDE*/ 81 82 #endif /* _CONFIG_DREAMPLUG_H */ 83