1 /* 2 * (C) Copyright 2011 3 * Jason Cooper <u-boot@lakedaemon.net> 4 * 5 * Based on work by: 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Siddarth Gore <gores@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DREAMPLUG_H 13 #define _CONFIG_DREAMPLUG_H 14 15 /* 16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types 17 * from Linus' kernel.org tree. This hasn't been updated primarily due to 18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it 19 * here. 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_DREAMPLUG 23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_DREAMPLUG 3550 26 #endif 27 28 /* 29 * Version number information 30 */ 31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" 32 33 /* 34 * High Level Configuration Options (easy to change) 35 */ 36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 37 #define CONFIG_KIRKWOOD 1 /* SOC Family Name */ 38 #define CONFIG_KW88F6281 1 /* SOC Name */ 39 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG 40 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 41 42 /* 43 * Commands configuration 44 */ 45 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 46 #include <config_cmd_default.h> 47 #define CONFIG_CMD_DHCP 48 #define CONFIG_CMD_ENV 49 #define CONFIG_CMD_FAT 50 #define CONFIG_CMD_SF 51 #define CONFIG_CMD_PING 52 #define CONFIG_CMD_USB 53 #define CONFIG_CMD_IDE 54 #define CONFIG_CMD_DATE 55 56 /* 57 * mv-common.h should be defined after CMD configs since it used them 58 * to enable certain macros 59 */ 60 #include "mv-common.h" 61 62 /* 63 * Environment variables configurations 64 */ 65 #ifdef CONFIG_SPI_FLASH 66 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 67 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ 68 #else 69 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 70 #endif 71 72 #ifdef CONFIG_CMD_SF 73 #define CONFIG_SPI_FLASH 1 74 #define CONFIG_HARD_SPI 1 75 #define CONFIG_KIRKWOOD_SPI 1 76 #define CONFIG_SPI_FLASH_MACRONIX 1 77 #define CONFIG_ENV_SPI_BUS 0 78 #define CONFIG_ENV_SPI_CS 0 79 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ 80 #endif 81 82 /* 83 * max 4k env size is enough, but in case of nand 84 * it has to be rounded to sector size 85 */ 86 #define CONFIG_ENV_SIZE 0x1000 /* 4k */ 87 #define CONFIG_ENV_ADDR 0x100000 88 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */ 89 90 /* 91 * Default environment variables 92 */ 93 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 94 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 95 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 96 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 97 "bootm 0x6400000;" 98 99 #define CONFIG_EXTRA_ENV_SETTINGS \ 100 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 101 "x_bootcmd_usb=usb start\0" \ 102 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ 103 "x_bootargs=console=ttyS0,115200\0" \ 104 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" 105 106 /* 107 * Ethernet Driver configuration 108 */ 109 #ifdef CONFIG_CMD_NET 110 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 111 #define CONFIG_PHY_BASE_ADR 0 112 #endif /* CONFIG_CMD_NET */ 113 114 /* 115 * SATA Driver configuration 116 */ 117 #ifdef CONFIG_MVSATA_IDE 118 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 119 #endif /*CONFIG_MVSATA_IDE*/ 120 121 /* 122 * RTC driver configuration 123 */ 124 #ifdef CONFIG_CMD_DATE 125 #define CONFIG_RTC_MV 126 #endif /* CONFIG_CMD_DATE */ 127 128 #define CONFIG_SYS_ALT_MEMTEST 129 130 /* 131 * display enhanced info about the cpu at boot. 132 */ 133 #define CONFIG_DISPLAY_CPUINFO 134 135 #define CONFIG_OF_LIBFDT 136 137 #endif /* _CONFIG_DREAMPLUG_H */ 138