1 /* 2 * Board configuration file for Dragonboard 410C 3 * 4 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIGS_DRAGONBOARD410C_H 10 #define __CONFIGS_DRAGONBOARD410C_H 11 12 #include <linux/sizes.h> 13 #include <asm/arch/sysmap-apq8016.h> 14 15 #define CONFIG_MISC_INIT_R /* To stop autoboot */ 16 17 /* Physical Memory Map */ 18 #define CONFIG_NR_DRAM_BANKS 1 19 #define PHYS_SDRAM_1 0x80000000 20 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/ 21 #define PHYS_SDRAM_1_SIZE 0x3da00000 22 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 23 #define CONFIG_SYS_TEXT_BASE 0x80080000 24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 25 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) 26 #define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */ 27 28 /* UART */ 29 #define CONFIG_BAUDRATE 115200 30 31 /* Generic Timer Definitions */ 32 #define COUNTER_FREQUENCY 19000000 33 34 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds" 35 36 /* Fixup - in init code we switch from device to host mode, 37 * it has to be done after each HCD reset */ 38 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 39 40 #define CONFIG_USB_HOST_ETHER /* Enable USB Networking */ 41 42 /* Support all possible USB ethernet dongles */ 43 #define CONFIG_USB_ETHER_DM9601 44 #define CONFIG_USB_ETHER_ASIX 45 #define CONFIG_USB_ETHER_ASIX88179 46 #define CONFIG_USB_ETHER_MCS7830 47 #define CONFIG_USB_ETHER_SMSC95XX 48 49 /* Libraries */ 50 #define CONFIG_MD5 51 52 /* Extra Commands */ 53 #define CONFIG_CMD_ENV 54 #define CONFIG_CMD_MD5SUM 55 /* Enable that for switching of boot partitions */ 56 /* Disabled by default as some sub-commands can brick eMMC */ 57 /*#define CONFIG_SUPPORT_EMMC_BOOT */ 58 #define CONFIG_CMD_REGINFO /* Register dump */ 59 #define CONFIG_CMD_TFTP 60 #define CONFIG_CMD_UNZIP 61 62 /* Partition table support */ 63 #define HAVE_BLOCK_DEVICE /* Needed for partition commands */ 64 65 #include <config_distro_defaults.h> 66 67 /* BOOTP options */ 68 #define CONFIG_BOOTP_BOOTFILESIZE 69 70 /* Environment - Boot*/ 71 #define CONFIG_BOOTARGS "console=ttyMSM0,115200n8" 72 73 #define BOOT_TARGET_DEVICES(func) \ 74 func(USB, usb, 0) \ 75 func(MMC, mmc, 1) \ 76 func(MMC, mmc, 0) \ 77 func(DHCP, dhcp, na) 78 79 #include <config_distro_bootcmd.h> 80 81 /* Does what recovery does */ 82 #define REFLASH(file, part) \ 83 "part start mmc 0 "#part" start && "\ 84 "part size mmc 0 "#part" size && "\ 85 "tftp $loadaddr "#file" && " \ 86 "mmc write $loadaddr $start $size && " 87 88 #define CONFIG_ENV_REFLASH \ 89 "mmc dev 0 && "\ 90 "usb start && "\ 91 "dhcp && "\ 92 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\ 93 "mmc write $loadaddr 0 43 && " \ 94 "mmc rescan && "\ 95 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\ 96 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\ 97 REFLASH(dragonboard/rescue/rpm.mbn, 3)\ 98 REFLASH(dragonboard/rescue/tz.mbn, 4)\ 99 REFLASH(dragonboard/rescue/hyp.mbn, 5)\ 100 REFLASH(dragonboard/rescue/sec.dat, 6)\ 101 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\ 102 REFLASH(dragonboard/u-boot.img, 8)\ 103 "usb stop &&"\ 104 "echo Reflash completed" 105 106 /* Environment */ 107 #define CONFIG_EXTRA_ENV_SETTINGS \ 108 "reflash="CONFIG_ENV_REFLASH"\0"\ 109 "loadaddr=0x81000000\0" \ 110 "fdt_high=0xffffffffffffffff\0" \ 111 "initrd_high=0xffffffffffffffff\0" \ 112 "linux_image=Image\0" \ 113 "kernel_addr_r=0x81000000\0"\ 114 "fdtfile=apq8016-sbc.dtb\0" \ 115 "fdt_addr_r=0x83000000\0"\ 116 "ramdisk_addr_r=0x84000000\0"\ 117 "scriptaddr=0x90000000\0"\ 118 "pxefile_addr_r=0x90100000\0"\ 119 BOOTENV 120 121 #define CONFIG_ENV_IS_NOWHERE 122 #define CONFIG_ENV_SIZE 0x2000 123 #define CONFIG_ENV_VARS_UBOOT_CONFIG 124 #define CONFIG_SYS_NO_FLASH 125 126 /* Size of malloc() pool */ 127 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) 128 129 /* Monitor Command Prompt */ 130 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 131 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 132 sizeof(CONFIG_SYS_PROMPT) + 16) 133 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 134 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 135 136 #endif 137