xref: /openbmc/u-boot/include/configs/draco.h (revision eb5ba3ae)
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #ifndef __CONFIG_DRACO_H
14 #define __CONFIG_DRACO_H
15 
16 #define CONFIG_SIEMENS_DRACO
17 #define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO
18 
19 #include "siemens-am33x-common.h"
20 
21 #define DDR_PLL_FREQ	303
22 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
23 
24 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
25 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
26 
27 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
28 	"button_dfu0=27\0" \
29 	"led0=103,1,0\0" \
30 	"led1=64,0,1\0"
31 
32  /* Physical Memory Map */
33 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
34 
35 /* I2C Configuration */
36 #define CONFIG_SYS_I2C_SPEED		100000
37 
38 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
39 #define EEPROM_ADDR_DDR3 0x90
40 #define EEPROM_ADDR_CHIP 0x120
41 
42 #undef CONFIG_MII
43 #undef CONFIG_PHY_GIGE
44 #define CONFIG_PHY_SMSC
45 
46 #define CONFIG_FACTORYSET
47 
48 /* Watchdog */
49 #define CONFIG_OMAP_WATCHDOG
50 
51 /* Define own nand partitions */
52 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
53 #define CONFIG_ENV_SIZE_REDUND      0x2000
54 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
55 
56 #define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2
57 
58 #ifndef CONFIG_SPL_BUILD
59 
60 /* Default env settings */
61 #define CONFIG_EXTRA_ENV_SETTINGS \
62 	"hostname=draco\0" \
63 	"ubi_off=2048\0"\
64 	"nand_img_size=0x400000\0" \
65 	"optargs=\0" \
66 	"preboot=draco_led 0\0" \
67 	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
68 	CONFIG_ENV_SETTINGS_V2 \
69 	CONFIG_ENV_SETTINGS_NAND_V2
70 
71 #ifndef CONFIG_RESTORE_FLASH
72 /* set to negative value for no autoboot */
73 
74 #define CONFIG_BOOTCOMMAND \
75 "if dfubutton; then " \
76 	"run dfu_start; " \
77 	"reset; " \
78 "fi;" \
79 "run nand_boot;" \
80 "run nand_boot_backup;" \
81 "reset;"
82 
83 #else
84 
85 #define CONFIG_BOOTCOMMAND			\
86 	"setenv autoload no; "			\
87 	"dhcp; "				\
88 	"if tftp 80000000 debrick.scr; then "	\
89 		"source 80000000; "		\
90 	"fi"
91 #endif
92 #endif	/* CONFIG_SPL_BUILD */
93 #endif	/* ! __CONFIG_DRACO_H */
94