1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #include <environment/ti/dfu.h> 16 17 #define CONFIG_DRA7XX 18 19 #ifdef CONFIG_SPL_BUILD 20 #define CONFIG_IODELAY_RECALIBRATION 21 #endif 22 23 #define CONFIG_VERY_BIG_RAM 24 #define CONFIG_NR_DRAM_BANKS 2 25 #define CONFIG_MAX_MEM_MAPPED 0x80000000 26 27 #ifndef CONFIG_QSPI_BOOT 28 /* MMC ENV related defines */ 29 #define CONFIG_ENV_IS_IN_MMC 30 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 31 #define CONFIG_ENV_SIZE (128 << 10) 32 #define CONFIG_ENV_OFFSET 0xE0000 33 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 34 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 35 #endif 36 37 #if (CONFIG_CONS_INDEX == 1) 38 #define CONSOLEDEV "ttyO0" 39 #elif (CONFIG_CONS_INDEX == 3) 40 #define CONSOLEDEV "ttyO2" 41 #endif 42 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 43 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 44 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 45 #define CONFIG_BAUDRATE 115200 46 47 #define CONFIG_SYS_OMAP_ABE_SYSCK 48 49 #ifndef CONFIG_SPL_BUILD 50 /* Define the default GPT table for eMMC */ 51 #define PARTS_DEFAULT \ 52 /* Linux partitions */ \ 53 "uuid_disk=${uuid_gpt_disk};" \ 54 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 55 /* Android partitions */ \ 56 "partitions_android=" \ 57 "uuid_disk=${uuid_gpt_disk};" \ 58 "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ 59 "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \ 60 "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ 61 "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ 62 "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \ 63 "name=efs,size=16M,uuid=${uuid_gpt_efs};" \ 64 "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ 65 "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ 66 "name=boot,size=10M,uuid=${uuid_gpt_boot};" \ 67 "name=system,size=768M,uuid=${uuid_gpt_system};" \ 68 "name=cache,size=256M,uuid=${uuid_gpt_cache};" \ 69 "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \ 70 "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \ 71 "name=userdata,size=-,uuid=${uuid_gpt_userdata}" 72 73 #define DFUARGS \ 74 "dfu_bufsiz=0x10000\0" \ 75 DFU_ALT_INFO_MMC \ 76 DFU_ALT_INFO_EMMC \ 77 DFU_ALT_INFO_RAM \ 78 DFU_ALT_INFO_QSPI 79 #else 80 /* Discard fastboot in SPL build, to spare some space */ 81 #undef CONFIG_FASTBOOT 82 #undef CONFIG_USB_FUNCTION_FASTBOOT 83 #undef CONFIG_CMD_FASTBOOT 84 #undef CONFIG_ANDROID_BOOT_IMAGE 85 #undef CONFIG_FASTBOOT_BUF_ADDR 86 #undef CONFIG_FASTBOOT_BUF_SIZE 87 #undef CONFIG_FASTBOOT_FLASH 88 #endif 89 90 #ifdef CONFIG_SPL_BUILD 91 #undef CONFIG_CMD_BOOTD 92 #ifdef CONFIG_SPL_DFU_SUPPORT 93 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 94 #define DFUARGS \ 95 "dfu_bufsiz=0x10000\0" \ 96 DFU_ALT_INFO_RAM 97 #endif 98 #endif 99 100 #include <configs/ti_omap5_common.h> 101 102 /* Enhance our eMMC support / experience. */ 103 #define CONFIG_RANDOM_UUID 104 #define CONFIG_HSMMC2_8BIT 105 106 /* CPSW Ethernet */ 107 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 108 #define CONFIG_BOOTP_DNS2 109 #define CONFIG_BOOTP_SEND_HOSTNAME 110 #define CONFIG_BOOTP_GATEWAY 111 #define CONFIG_BOOTP_SUBNETMASK 112 #define CONFIG_NET_RETRY_COUNT 10 113 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 114 #define CONFIG_MII /* Required in net/eth.c */ 115 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 116 #define CONFIG_PHYLIB 117 #define CONFIG_PHY_TI 118 119 /* SPI */ 120 #undef CONFIG_OMAP3_SPI 121 #define CONFIG_TI_SPI_MMAP 122 #define CONFIG_SF_DEFAULT_SPEED 76800000 123 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 124 #define CONFIG_QSPI_QUAD_SUPPORT 125 126 #ifdef CONFIG_SPL_BUILD 127 #undef CONFIG_DM_SPI 128 #undef CONFIG_DM_SPI_FLASH 129 #endif 130 131 /* 132 * Default to using SPI for environment, etc. 133 * 0x000000 - 0x040000 : QSPI.SPL (256KiB) 134 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 135 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 136 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 137 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 138 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 139 * 0x9E0000 - 0x2000000 : USERLAND 140 */ 141 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 142 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 143 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 144 #if defined(CONFIG_QSPI_BOOT) 145 #define CONFIG_ENV_IS_IN_SPI_FLASH 146 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 147 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 148 #define CONFIG_ENV_SIZE (64 << 10) 149 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 150 #define CONFIG_ENV_OFFSET 0x1C0000 151 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 152 #endif 153 154 /* SPI SPL */ 155 #define CONFIG_TI_EDMA3 156 #define CONFIG_SPL_SPI_LOAD 157 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 158 159 #define CONFIG_SUPPORT_EMMC_BOOT 160 161 /* USB xHCI HOST */ 162 #define CONFIG_USB_XHCI_OMAP 163 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 164 165 #define CONFIG_OMAP_USB_PHY 166 #define CONFIG_OMAP_USB2PHY2_HOST 167 168 /* SATA */ 169 #define CONFIG_SCSI 170 #define CONFIG_LIBATA 171 #define CONFIG_SCSI_AHCI 172 #define CONFIG_SCSI_AHCI_PLAT 173 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 174 #define CONFIG_SYS_SCSI_MAX_LUN 1 175 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 176 CONFIG_SYS_SCSI_MAX_LUN) 177 178 /* NAND support */ 179 #ifdef CONFIG_NAND 180 /* NAND: device related configs */ 181 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 182 #define CONFIG_SYS_NAND_OOBSIZE 64 183 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 184 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 185 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 186 CONFIG_SYS_NAND_PAGE_SIZE) 187 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 188 /* NAND: driver related configs */ 189 #define CONFIG_NAND_OMAP_GPMC 190 #define CONFIG_NAND_OMAP_ELM 191 #define CONFIG_SYS_NAND_ONFI_DETECTION 192 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 193 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 194 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 195 10, 11, 12, 13, 14, 15, 16, 17, \ 196 18, 19, 20, 21, 22, 23, 24, 25, \ 197 26, 27, 28, 29, 30, 31, 32, 33, \ 198 34, 35, 36, 37, 38, 39, 40, 41, \ 199 42, 43, 44, 45, 46, 47, 48, 49, \ 200 50, 51, 52, 53, 54, 55, 56, 57, } 201 #define CONFIG_SYS_NAND_ECCSIZE 512 202 #define CONFIG_SYS_NAND_ECCBYTES 14 203 #define MTDIDS_DEFAULT "nand0=nand.0" 204 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 205 "128k(NAND.SPL)," \ 206 "128k(NAND.SPL.backup1)," \ 207 "128k(NAND.SPL.backup2)," \ 208 "128k(NAND.SPL.backup3)," \ 209 "256k(NAND.u-boot-spl-os)," \ 210 "1m(NAND.u-boot)," \ 211 "128k(NAND.u-boot-env)," \ 212 "128k(NAND.u-boot-env.backup1)," \ 213 "8m(NAND.kernel)," \ 214 "-(NAND.file-system)" 215 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 216 /* NAND: SPL related configs */ 217 #ifdef CONFIG_SPL_NAND_SUPPORT 218 #define CONFIG_SPL_NAND_AM33XX_BCH 219 #endif 220 /* NAND: SPL falcon mode configs */ 221 #ifdef CONFIG_SPL_OS_BOOT 222 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ 223 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ 224 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 225 #endif 226 #endif /* !CONFIG_NAND */ 227 228 /* Parallel NOR Support */ 229 #if defined(CONFIG_NOR) 230 /* NOR: device related configs */ 231 #define CONFIG_SYS_MAX_FLASH_SECT 512 232 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 233 #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ 234 /* #define CONFIG_INIT_IGNORE_ERROR */ 235 #undef CONFIG_SYS_NO_FLASH 236 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 237 #define CONFIG_SYS_FLASH_PROTECTION 238 #define CONFIG_SYS_FLASH_CFI 239 #define CONFIG_FLASH_CFI_DRIVER 240 #define CONFIG_FLASH_CFI_MTD 241 #define CONFIG_SYS_MAX_FLASH_BANKS 1 242 #define CONFIG_SYS_FLASH_BASE (0x08000000) 243 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 244 /* Reduce SPL size by removing unlikey targets */ 245 #ifdef CONFIG_NOR_BOOT 246 #define CONFIG_ENV_IS_IN_FLASH 247 #define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */ 248 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 249 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 250 "128k(NOR.SPL)," \ 251 "128k(NOR.SPL.backup1)," \ 252 "128k(NOR.SPL.backup2)," \ 253 "128k(NOR.SPL.backup3)," \ 254 "256k(NOR.u-boot-spl-os)," \ 255 "1m(NOR.u-boot)," \ 256 "128k(NOR.u-boot-env)," \ 257 "128k(NOR.u-boot-env.backup1)," \ 258 "8m(NOR.kernel)," \ 259 "-(NOR.rootfs)" 260 #define CONFIG_ENV_OFFSET 0x001c0000 261 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 262 #endif 263 #endif /* NOR support */ 264 265 /* EEPROM */ 266 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 267 #define CONFIG_EEPROM_BUS_ADDRESS 0 268 269 #endif /* __CONFIG_DRA7XX_EVM_H */ 270