1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #define CONFIG_DRA7XX 16 17 #ifndef CONFIG_QSPI_BOOT 18 /* MMC ENV related defines */ 19 #define CONFIG_ENV_IS_IN_MMC 20 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 21 #define CONFIG_ENV_SIZE (128 << 10) 22 #define CONFIG_ENV_OFFSET 0xE0000 23 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 24 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 25 #endif 26 #define CONFIG_CMD_SAVEENV 27 28 #if (CONFIG_CONS_INDEX == 1) 29 #define CONSOLEDEV "ttyO0" 30 #elif (CONFIG_CONS_INDEX == 3) 31 #define CONSOLEDEV "ttyO2" 32 #endif 33 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 34 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 35 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 36 #define CONFIG_BAUDRATE 115200 37 38 #define CONFIG_SYS_OMAP_ABE_SYSCK 39 40 /* Define the default GPT table for eMMC */ 41 #define PARTS_DEFAULT \ 42 "uuid_disk=${uuid_gpt_disk};" \ 43 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 44 45 #include <configs/ti_omap5_common.h> 46 47 /* Enhance our eMMC support / experience. */ 48 #define CONFIG_CMD_GPT 49 #define CONFIG_EFI_PARTITION 50 #define CONFIG_PARTITION_UUIDS 51 #define CONFIG_CMD_PART 52 53 /* CPSW Ethernet */ 54 #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ 55 #define CONFIG_CMD_DHCP 56 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 57 #define CONFIG_BOOTP_DNS2 58 #define CONFIG_BOOTP_SEND_HOSTNAME 59 #define CONFIG_BOOTP_GATEWAY 60 #define CONFIG_BOOTP_SUBNETMASK 61 #define CONFIG_NET_RETRY_COUNT 10 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_MII 64 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 65 #define CONFIG_MII /* Required in net/eth.c */ 66 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 67 #define CONFIG_PHYLIB 68 69 /* SPI */ 70 #undef CONFIG_OMAP3_SPI 71 #define CONFIG_TI_QSPI 72 #define CONFIG_SPI_FLASH 73 #define CONFIG_SPI_FLASH_SPANSION 74 #define CONFIG_CMD_SF 75 #define CONFIG_CMD_SPI 76 #define CONFIG_SPI_FLASH_BAR 77 #define CONFIG_TI_SPI_MMAP 78 #define CONFIG_SF_DEFAULT_SPEED 48000000 79 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 80 81 /* 82 * Default to using SPI for environment, etc. 83 * 0x000000 - 0x010000 : QSPI.SPL (64KiB) 84 * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB) 85 * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB) 86 * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB) 87 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 88 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 89 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 90 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 91 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 92 * 0x9E0000 - 0x2000000 : USERLAND 93 */ 94 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 95 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 96 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 97 #if defined(CONFIG_QSPI_BOOT) 98 /* In SPL, use the environment and discard MMC support for space. */ 99 #ifdef CONFIG_SPL_BUILD 100 #undef CONFIG_SPL_MMC_SUPPORT 101 #undef CONFIG_SPL_MAX_SIZE 102 #define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ 103 #endif 104 #define CONFIG_SPL_ENV_SUPPORT 105 #define CONFIG_ENV_IS_IN_SPI_FLASH 106 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 107 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 108 #define CONFIG_ENV_SIZE (64 << 10) 109 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 110 #define CONFIG_ENV_OFFSET 0x1C0000 111 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 112 #endif 113 114 /* SPI SPL */ 115 #define CONFIG_SPL_SPI_SUPPORT 116 #define CONFIG_SPL_SPI_LOAD 117 #define CONFIG_SPL_SPI_FLASH_SUPPORT 118 #define CONFIG_SPL_SPI_BUS 0 119 #define CONFIG_SPL_SPI_CS 0 120 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 121 122 #define CONFIG_SUPPORT_EMMC_BOOT 123 124 /* USB xHCI HOST */ 125 #define CONFIG_CMD_USB 126 #define CONFIG_USB_HOST 127 #define CONFIG_USB_XHCI 128 #define CONFIG_USB_XHCI_OMAP 129 #define CONFIG_USB_STORAGE 130 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 131 132 #define CONFIG_OMAP_USB_PHY 133 #define CONFIG_OMAP_USB2PHY2_HOST 134 135 /* SATA */ 136 #define CONFIG_BOARD_LATE_INIT 137 #define CONFIG_CMD_SCSI 138 #define CONFIG_LIBATA 139 #define CONFIG_SCSI_AHCI 140 #define CONFIG_SCSI_AHCI_PLAT 141 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 142 #define CONFIG_SYS_SCSI_MAX_LUN 1 143 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 144 CONFIG_SYS_SCSI_MAX_LUN) 145 146 #endif /* __CONFIG_DRA7XX_EVM_H */ 147