1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #include <environment/ti/dfu.h> 16 17 #define CONFIG_DRA7XX 18 19 #ifdef CONFIG_SPL_BUILD 20 #define CONFIG_IODELAY_RECALIBRATION 21 #endif 22 23 #define CONFIG_VERY_BIG_RAM 24 #define CONFIG_NR_DRAM_BANKS 2 25 #define CONFIG_MAX_MEM_MAPPED 0x80000000 26 27 #ifndef CONFIG_QSPI_BOOT 28 /* MMC ENV related defines */ 29 #define CONFIG_ENV_IS_IN_MMC 30 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 31 #define CONFIG_ENV_SIZE (128 << 10) 32 #define CONFIG_ENV_OFFSET 0xE0000 33 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 34 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 35 #endif 36 37 #if (CONFIG_CONS_INDEX == 1) 38 #define CONSOLEDEV "ttyO0" 39 #elif (CONFIG_CONS_INDEX == 3) 40 #define CONSOLEDEV "ttyO2" 41 #endif 42 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 43 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 44 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 45 #define CONFIG_BAUDRATE 115200 46 47 #define CONFIG_SYS_OMAP_ABE_SYSCK 48 49 #ifndef CONFIG_SPL_BUILD 50 /* Define the default GPT table for eMMC */ 51 #define PARTS_DEFAULT \ 52 /* Linux partitions */ \ 53 "uuid_disk=${uuid_gpt_disk};" \ 54 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 55 /* Android partitions */ \ 56 "partitions_android=" \ 57 "uuid_disk=${uuid_gpt_disk};" \ 58 "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ 59 "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \ 60 "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ 61 "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ 62 "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \ 63 "name=efs,size=16M,uuid=${uuid_gpt_efs};" \ 64 "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ 65 "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ 66 "name=boot,size=10M,uuid=${uuid_gpt_boot};" \ 67 "name=system,size=768M,uuid=${uuid_gpt_system};" \ 68 "name=cache,size=256M,uuid=${uuid_gpt_cache};" \ 69 "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \ 70 "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \ 71 "name=userdata,size=-,uuid=${uuid_gpt_userdata}" 72 73 #define DFUARGS \ 74 "dfu_bufsiz=0x10000\0" \ 75 DFU_ALT_INFO_MMC \ 76 DFU_ALT_INFO_EMMC \ 77 DFU_ALT_INFO_RAM \ 78 DFU_ALT_INFO_QSPI 79 #else 80 /* Discard fastboot in SPL build, to spare some space */ 81 #undef CONFIG_FASTBOOT 82 #undef CONFIG_USB_FUNCTION_FASTBOOT 83 #undef CONFIG_CMD_FASTBOOT 84 #undef CONFIG_ANDROID_BOOT_IMAGE 85 #undef CONFIG_FASTBOOT_BUF_ADDR 86 #undef CONFIG_FASTBOOT_BUF_SIZE 87 #undef CONFIG_FASTBOOT_FLASH 88 #endif 89 90 #ifdef CONFIG_SPL_BUILD 91 #undef CONFIG_CMD_BOOTD 92 #ifdef CONFIG_SPL_DFU_SUPPORT 93 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 94 #define DFUARGS \ 95 "dfu_bufsiz=0x10000\0" \ 96 DFU_ALT_INFO_RAM 97 #endif 98 #endif 99 100 #include <configs/ti_omap5_common.h> 101 102 /* Enhance our eMMC support / experience. */ 103 #define CONFIG_CMD_GPT 104 #define CONFIG_EFI_PARTITION 105 #define CONFIG_RANDOM_UUID 106 #define CONFIG_HSMMC2_8BIT 107 108 /* CPSW Ethernet */ 109 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 110 #define CONFIG_BOOTP_DNS2 111 #define CONFIG_BOOTP_SEND_HOSTNAME 112 #define CONFIG_BOOTP_GATEWAY 113 #define CONFIG_BOOTP_SUBNETMASK 114 #define CONFIG_NET_RETRY_COUNT 10 115 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 116 #define CONFIG_MII /* Required in net/eth.c */ 117 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 118 #define CONFIG_PHYLIB 119 #define CONFIG_PHY_TI 120 121 /* SPI */ 122 #undef CONFIG_OMAP3_SPI 123 #define CONFIG_TI_SPI_MMAP 124 #define CONFIG_SF_DEFAULT_SPEED 76800000 125 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 126 #define CONFIG_QSPI_QUAD_SUPPORT 127 128 #ifdef CONFIG_SPL_BUILD 129 #undef CONFIG_DM_SPI 130 #undef CONFIG_DM_SPI_FLASH 131 #endif 132 133 /* 134 * Default to using SPI for environment, etc. 135 * 0x000000 - 0x040000 : QSPI.SPL (256KiB) 136 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 137 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 138 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 139 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 140 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 141 * 0x9E0000 - 0x2000000 : USERLAND 142 */ 143 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 144 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 145 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 146 #if defined(CONFIG_QSPI_BOOT) 147 #define CONFIG_ENV_IS_IN_SPI_FLASH 148 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 149 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 150 #define CONFIG_ENV_SIZE (64 << 10) 151 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 152 #define CONFIG_ENV_OFFSET 0x1C0000 153 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 154 #endif 155 156 /* SPI SPL */ 157 #define CONFIG_TI_EDMA3 158 #define CONFIG_SPL_SPI_LOAD 159 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 160 161 #define CONFIG_SUPPORT_EMMC_BOOT 162 163 /* USB xHCI HOST */ 164 #define CONFIG_USB_XHCI_OMAP 165 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 166 167 #define CONFIG_OMAP_USB_PHY 168 #define CONFIG_OMAP_USB2PHY2_HOST 169 170 /* SATA */ 171 #define CONFIG_SCSI 172 #define CONFIG_LIBATA 173 #define CONFIG_SCSI_AHCI 174 #define CONFIG_SCSI_AHCI_PLAT 175 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 176 #define CONFIG_SYS_SCSI_MAX_LUN 1 177 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 178 CONFIG_SYS_SCSI_MAX_LUN) 179 180 /* NAND support */ 181 #ifdef CONFIG_NAND 182 /* NAND: device related configs */ 183 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 184 #define CONFIG_SYS_NAND_OOBSIZE 64 185 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 186 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 187 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 188 CONFIG_SYS_NAND_PAGE_SIZE) 189 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 190 /* NAND: driver related configs */ 191 #define CONFIG_NAND_OMAP_GPMC 192 #define CONFIG_NAND_OMAP_ELM 193 #define CONFIG_SYS_NAND_ONFI_DETECTION 194 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 195 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 196 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 197 10, 11, 12, 13, 14, 15, 16, 17, \ 198 18, 19, 20, 21, 22, 23, 24, 25, \ 199 26, 27, 28, 29, 30, 31, 32, 33, \ 200 34, 35, 36, 37, 38, 39, 40, 41, \ 201 42, 43, 44, 45, 46, 47, 48, 49, \ 202 50, 51, 52, 53, 54, 55, 56, 57, } 203 #define CONFIG_SYS_NAND_ECCSIZE 512 204 #define CONFIG_SYS_NAND_ECCBYTES 14 205 #define MTDIDS_DEFAULT "nand0=nand.0" 206 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 207 "128k(NAND.SPL)," \ 208 "128k(NAND.SPL.backup1)," \ 209 "128k(NAND.SPL.backup2)," \ 210 "128k(NAND.SPL.backup3)," \ 211 "256k(NAND.u-boot-spl-os)," \ 212 "1m(NAND.u-boot)," \ 213 "128k(NAND.u-boot-env)," \ 214 "128k(NAND.u-boot-env.backup1)," \ 215 "8m(NAND.kernel)," \ 216 "-(NAND.file-system)" 217 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 218 /* NAND: SPL related configs */ 219 #ifdef CONFIG_SPL_NAND_SUPPORT 220 #define CONFIG_SPL_NAND_AM33XX_BCH 221 #endif 222 /* NAND: SPL falcon mode configs */ 223 #ifdef CONFIG_SPL_OS_BOOT 224 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ 225 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ 226 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 227 #endif 228 #endif /* !CONFIG_NAND */ 229 230 /* Parallel NOR Support */ 231 #if defined(CONFIG_NOR) 232 /* NOR: device related configs */ 233 #define CONFIG_SYS_MAX_FLASH_SECT 512 234 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 235 #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ 236 /* #define CONFIG_INIT_IGNORE_ERROR */ 237 #undef CONFIG_SYS_NO_FLASH 238 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 239 #define CONFIG_SYS_FLASH_PROTECTION 240 #define CONFIG_SYS_FLASH_CFI 241 #define CONFIG_FLASH_CFI_DRIVER 242 #define CONFIG_FLASH_CFI_MTD 243 #define CONFIG_SYS_MAX_FLASH_BANKS 1 244 #define CONFIG_SYS_FLASH_BASE (0x08000000) 245 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 246 /* Reduce SPL size by removing unlikey targets */ 247 #ifdef CONFIG_NOR_BOOT 248 #define CONFIG_ENV_IS_IN_FLASH 249 #define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */ 250 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 251 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 252 "128k(NOR.SPL)," \ 253 "128k(NOR.SPL.backup1)," \ 254 "128k(NOR.SPL.backup2)," \ 255 "128k(NOR.SPL.backup3)," \ 256 "256k(NOR.u-boot-spl-os)," \ 257 "1m(NOR.u-boot)," \ 258 "128k(NOR.u-boot-env)," \ 259 "128k(NOR.u-boot-env.backup1)," \ 260 "8m(NOR.kernel)," \ 261 "-(NOR.rootfs)" 262 #define CONFIG_ENV_OFFSET 0x001c0000 263 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 264 #endif 265 #endif /* NOR support */ 266 267 /* EEPROM */ 268 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 269 #define CONFIG_EEPROM_BUS_ADDRESS 0 270 271 #endif /* __CONFIG_DRA7XX_EVM_H */ 272