1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #define CONFIG_DRA7XX 16 #define CONFIG_BOARD_EARLY_INIT_F 17 18 #ifdef CONFIG_SPL_BUILD 19 #define CONFIG_IODELAY_RECALIBRATION 20 #endif 21 22 #define CONFIG_VERY_BIG_RAM 23 #define CONFIG_NR_DRAM_BANKS 2 24 #define CONFIG_MAX_MEM_MAPPED 0x80000000 25 26 #ifndef CONFIG_QSPI_BOOT 27 /* MMC ENV related defines */ 28 #define CONFIG_ENV_IS_IN_MMC 29 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 30 #define CONFIG_ENV_SIZE (128 << 10) 31 #define CONFIG_ENV_OFFSET 0xE0000 32 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 33 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 34 #endif 35 36 #if (CONFIG_CONS_INDEX == 1) 37 #define CONSOLEDEV "ttyO0" 38 #elif (CONFIG_CONS_INDEX == 3) 39 #define CONSOLEDEV "ttyO2" 40 #endif 41 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 42 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 43 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 44 #define CONFIG_BAUDRATE 115200 45 46 #define CONFIG_SYS_OMAP_ABE_SYSCK 47 48 #ifndef CONFIG_SPL_BUILD 49 /* Define the default GPT table for eMMC */ 50 #define PARTS_DEFAULT \ 51 /* Linux partitions */ \ 52 "uuid_disk=${uuid_gpt_disk};" \ 53 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 54 /* Android partitions */ \ 55 "partitions_android=" \ 56 "uuid_disk=${uuid_gpt_disk};" \ 57 "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \ 58 "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \ 59 "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ 60 "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ 61 "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \ 62 "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ 63 "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ 64 "name=boot,size=10M,uuid=${uuid_gpt_boot};" \ 65 "name=system,size=768M,uuid=${uuid_gpt_system};" \ 66 "name=cache,size=256M,uuid=${uuid_gpt_cache};" \ 67 "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \ 68 "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \ 69 "name=userdata,size=-,uuid=${uuid_gpt_userdata}" 70 71 #define DFU_ALT_INFO_MMC \ 72 "dfu_alt_info_mmc=" \ 73 "boot part 0 1;" \ 74 "rootfs part 0 2;" \ 75 "MLO fat 0 1;" \ 76 "MLO.raw raw 0x100 0x100;" \ 77 "u-boot.img.raw raw 0x300 0x400;" \ 78 "spl-os-args.raw raw 0x80 0x80;" \ 79 "spl-os-image.raw raw 0x900 0x2000;" \ 80 "spl-os-args fat 0 1;" \ 81 "spl-os-image fat 0 1;" \ 82 "u-boot.img fat 0 1;" \ 83 "uEnv.txt fat 0 1\0" 84 85 #define DFU_ALT_INFO_EMMC \ 86 "dfu_alt_info_emmc=" \ 87 "rawemmc raw 0 3751936;" \ 88 "boot part 1 1;" \ 89 "rootfs part 1 2;" \ 90 "MLO fat 1 1;" \ 91 "MLO.raw raw 0x100 0x100;" \ 92 "u-boot.img.raw raw 0x300 0x400;" \ 93 "spl-os-args.raw raw 0x80 0x80;" \ 94 "spl-os-image.raw raw 0x900 0x2000;" \ 95 "spl-os-args fat 1 1;" \ 96 "spl-os-image fat 1 1;" \ 97 "u-boot.img fat 1 1;" \ 98 "uEnv.txt fat 1 1\0" 99 100 #define DFU_ALT_INFO_RAM \ 101 "dfu_alt_info_ram=" \ 102 "kernel ram 0x80200000 0x4000000;" \ 103 "fdt ram 0x80f80000 0x80000;" \ 104 "ramdisk ram 0x81000000 0x4000000\0" 105 106 #define DFU_ALT_INFO_QSPI \ 107 "dfu_alt_info_qspi=" \ 108 "MLO raw 0x0 0x040000;" \ 109 "u-boot.img raw 0x040000 0x0100000;" \ 110 "u-boot-spl-os raw 0x140000 0x080000;" \ 111 "u-boot-env raw 0x1C0000 0x010000;" \ 112 "u-boot-env.backup raw 0x1D0000 0x010000;" \ 113 "kernel raw 0x1E0000 0x800000\0" 114 115 #define DFUARGS \ 116 "dfu_bufsiz=0x10000\0" \ 117 DFU_ALT_INFO_MMC \ 118 DFU_ALT_INFO_EMMC \ 119 DFU_ALT_INFO_RAM \ 120 DFU_ALT_INFO_QSPI 121 #else 122 /* Discard fastboot in SPL build, to spare some space */ 123 #undef CONFIG_FASTBOOT 124 #undef CONFIG_USB_FUNCTION_FASTBOOT 125 #undef CONFIG_CMD_FASTBOOT 126 #undef CONFIG_ANDROID_BOOT_IMAGE 127 #undef CONFIG_FASTBOOT_BUF_ADDR 128 #undef CONFIG_FASTBOOT_BUF_SIZE 129 #undef CONFIG_FASTBOOT_FLASH 130 #endif 131 132 #ifdef CONFIG_SPL_BUILD 133 #undef CONFIG_CMD_BOOTD 134 #ifdef CONFIG_SPL_DFU_SUPPORT 135 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 136 #define CONFIG_SPL_HASH_SUPPORT 137 #define DFU_ALT_INFO_RAM \ 138 "dfu_alt_info_ram=" \ 139 "kernel ram 0x80200000 0x4000000;" \ 140 "fdt ram 0x80f80000 0x80000;" \ 141 "ramdisk ram 0x81000000 0x4000000\0" 142 #define DFUARGS \ 143 "dfu_bufsiz=0x10000\0" \ 144 DFU_ALT_INFO_RAM 145 #endif 146 #endif 147 148 #include <configs/ti_omap5_common.h> 149 150 /* Enhance our eMMC support / experience. */ 151 #define CONFIG_CMD_GPT 152 #define CONFIG_EFI_PARTITION 153 #define CONFIG_RANDOM_UUID 154 #define CONFIG_HSMMC2_8BIT 155 156 /* CPSW Ethernet */ 157 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 158 #define CONFIG_BOOTP_DNS2 159 #define CONFIG_BOOTP_SEND_HOSTNAME 160 #define CONFIG_BOOTP_GATEWAY 161 #define CONFIG_BOOTP_SUBNETMASK 162 #define CONFIG_NET_RETRY_COUNT 10 163 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 164 #define CONFIG_MII /* Required in net/eth.c */ 165 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 166 #define CONFIG_PHYLIB 167 #define CONFIG_PHY_TI 168 169 /* SPI */ 170 #undef CONFIG_OMAP3_SPI 171 #define CONFIG_TI_SPI_MMAP 172 #define CONFIG_SF_DEFAULT_SPEED 76800000 173 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 174 #define CONFIG_QSPI_QUAD_SUPPORT 175 176 #ifdef CONFIG_SPL_BUILD 177 #undef CONFIG_DM_SPI 178 #undef CONFIG_DM_SPI_FLASH 179 #endif 180 181 /* 182 * Default to using SPI for environment, etc. 183 * 0x000000 - 0x040000 : QSPI.SPL (256KiB) 184 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 185 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 186 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 187 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 188 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 189 * 0x9E0000 - 0x2000000 : USERLAND 190 */ 191 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 192 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 193 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 194 #if defined(CONFIG_QSPI_BOOT) 195 #define CONFIG_ENV_IS_IN_SPI_FLASH 196 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 197 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 198 #define CONFIG_ENV_SIZE (64 << 10) 199 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 200 #define CONFIG_ENV_OFFSET 0x1C0000 201 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 202 #endif 203 204 /* SPI SPL */ 205 #define CONFIG_TI_EDMA3 206 #define CONFIG_SPL_SPI_LOAD 207 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 208 209 #define CONFIG_SUPPORT_EMMC_BOOT 210 211 /* USB xHCI HOST */ 212 #define CONFIG_USB_XHCI_OMAP 213 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 214 215 #define CONFIG_OMAP_USB_PHY 216 #define CONFIG_OMAP_USB2PHY2_HOST 217 218 /* SATA */ 219 #define CONFIG_BOARD_LATE_INIT 220 #define CONFIG_SCSI 221 #define CONFIG_LIBATA 222 #define CONFIG_SCSI_AHCI 223 #define CONFIG_SCSI_AHCI_PLAT 224 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 225 #define CONFIG_SYS_SCSI_MAX_LUN 1 226 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 227 CONFIG_SYS_SCSI_MAX_LUN) 228 229 /* NAND support */ 230 #ifdef CONFIG_NAND 231 /* NAND: device related configs */ 232 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 233 #define CONFIG_SYS_NAND_OOBSIZE 64 234 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 235 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 236 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 237 CONFIG_SYS_NAND_PAGE_SIZE) 238 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 239 /* NAND: driver related configs */ 240 #define CONFIG_NAND_OMAP_GPMC 241 #define CONFIG_NAND_OMAP_ELM 242 #define CONFIG_SYS_NAND_ONFI_DETECTION 243 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 244 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 245 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 246 10, 11, 12, 13, 14, 15, 16, 17, \ 247 18, 19, 20, 21, 22, 23, 24, 25, \ 248 26, 27, 28, 29, 30, 31, 32, 33, \ 249 34, 35, 36, 37, 38, 39, 40, 41, \ 250 42, 43, 44, 45, 46, 47, 48, 49, \ 251 50, 51, 52, 53, 54, 55, 56, 57, } 252 #define CONFIG_SYS_NAND_ECCSIZE 512 253 #define CONFIG_SYS_NAND_ECCBYTES 14 254 #define MTDIDS_DEFAULT "nand0=nand.0" 255 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 256 "128k(NAND.SPL)," \ 257 "128k(NAND.SPL.backup1)," \ 258 "128k(NAND.SPL.backup2)," \ 259 "128k(NAND.SPL.backup3)," \ 260 "256k(NAND.u-boot-spl-os)," \ 261 "1m(NAND.u-boot)," \ 262 "128k(NAND.u-boot-env)," \ 263 "128k(NAND.u-boot-env.backup1)," \ 264 "8m(NAND.kernel)," \ 265 "-(NAND.file-system)" 266 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 267 /* NAND: SPL related configs */ 268 #ifdef CONFIG_SPL_NAND_SUPPORT 269 #define CONFIG_SPL_NAND_AM33XX_BCH 270 #endif 271 /* NAND: SPL falcon mode configs */ 272 #ifdef CONFIG_SPL_OS_BOOT 273 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ 274 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ 275 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 276 #endif 277 #endif /* !CONFIG_NAND */ 278 279 /* Parallel NOR Support */ 280 #if defined(CONFIG_NOR) 281 /* NOR: device related configs */ 282 #define CONFIG_SYS_MAX_FLASH_SECT 512 283 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 284 #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ 285 /* #define CONFIG_INIT_IGNORE_ERROR */ 286 #undef CONFIG_SYS_NO_FLASH 287 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 288 #define CONFIG_SYS_FLASH_PROTECTION 289 #define CONFIG_SYS_FLASH_CFI 290 #define CONFIG_FLASH_CFI_DRIVER 291 #define CONFIG_FLASH_CFI_MTD 292 #define CONFIG_SYS_MAX_FLASH_BANKS 1 293 #define CONFIG_SYS_FLASH_BASE (0x08000000) 294 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 295 /* Reduce SPL size by removing unlikey targets */ 296 #ifdef CONFIG_NOR_BOOT 297 #define CONFIG_ENV_IS_IN_FLASH 298 #define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */ 299 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 300 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 301 "128k(NOR.SPL)," \ 302 "128k(NOR.SPL.backup1)," \ 303 "128k(NOR.SPL.backup2)," \ 304 "128k(NOR.SPL.backup3)," \ 305 "256k(NOR.u-boot-spl-os)," \ 306 "1m(NOR.u-boot)," \ 307 "128k(NOR.u-boot-env)," \ 308 "128k(NOR.u-boot-env.backup1)," \ 309 "8m(NOR.kernel)," \ 310 "-(NOR.rootfs)" 311 #define CONFIG_ENV_OFFSET 0x001c0000 312 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 313 #endif 314 #endif /* NOR support */ 315 316 /* EEPROM */ 317 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 318 #define CONFIG_EEPROM_BUS_ADDRESS 0 319 320 #endif /* __CONFIG_DRA7XX_EVM_H */ 321