1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #define CONFIG_DRA7XX 16 #define CONFIG_BOARD_EARLY_INIT_F 17 18 #ifdef CONFIG_SPL_BUILD 19 #define CONFIG_IODELAY_RECALIBRATION 20 #endif 21 22 #define CONFIG_VERY_BIG_RAM 23 #define CONFIG_PHYS_64BIT 24 #define CONFIG_NR_DRAM_BANKS 2 25 #define CONFIG_MAX_MEM_MAPPED 0x80000000 26 27 #ifndef CONFIG_QSPI_BOOT 28 /* MMC ENV related defines */ 29 #define CONFIG_ENV_IS_IN_MMC 30 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 31 #define CONFIG_ENV_SIZE (128 << 10) 32 #define CONFIG_ENV_OFFSET 0xE0000 33 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 34 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 35 #endif 36 37 #if (CONFIG_CONS_INDEX == 1) 38 #define CONSOLEDEV "ttyO0" 39 #elif (CONFIG_CONS_INDEX == 3) 40 #define CONSOLEDEV "ttyO2" 41 #endif 42 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 43 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 44 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 45 #define CONFIG_BAUDRATE 115200 46 47 #define CONFIG_SYS_OMAP_ABE_SYSCK 48 49 #ifndef CONFIG_SPL_BUILD 50 /* Define the default GPT table for eMMC */ 51 #define PARTS_DEFAULT \ 52 /* Linux partitions */ \ 53 "uuid_disk=${uuid_gpt_disk};" \ 54 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 55 /* Android partitions */ \ 56 "partitions_android=" \ 57 "uuid_disk=${uuid_gpt_disk};" \ 58 "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \ 59 "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \ 60 "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ 61 "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ 62 "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \ 63 "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ 64 "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ 65 "name=boot,size=10M,uuid=${uuid_gpt_boot};" \ 66 "name=system,size=768M,uuid=${uuid_gpt_system};" \ 67 "name=cache,size=256M,uuid=${uuid_gpt_cache};" \ 68 "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \ 69 "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \ 70 "name=userdata,size=-,uuid=${uuid_gpt_userdata}" 71 72 #define DFU_ALT_INFO_MMC \ 73 "dfu_alt_info_mmc=" \ 74 "boot part 0 1;" \ 75 "rootfs part 0 2;" \ 76 "MLO fat 0 1;" \ 77 "MLO.raw raw 0x100 0x100;" \ 78 "u-boot.img.raw raw 0x300 0x400;" \ 79 "spl-os-args.raw raw 0x80 0x80;" \ 80 "spl-os-image.raw raw 0x900 0x2000;" \ 81 "spl-os-args fat 0 1;" \ 82 "spl-os-image fat 0 1;" \ 83 "u-boot.img fat 0 1;" \ 84 "uEnv.txt fat 0 1\0" 85 86 #define DFU_ALT_INFO_EMMC \ 87 "dfu_alt_info_emmc=" \ 88 "rawemmc raw 0 3751936;" \ 89 "boot part 1 1;" \ 90 "rootfs part 1 2;" \ 91 "MLO fat 1 1;" \ 92 "MLO.raw raw 0x100 0x100;" \ 93 "u-boot.img.raw raw 0x300 0x400;" \ 94 "spl-os-args.raw raw 0x80 0x80;" \ 95 "spl-os-image.raw raw 0x900 0x2000;" \ 96 "spl-os-args fat 1 1;" \ 97 "spl-os-image fat 1 1;" \ 98 "u-boot.img fat 1 1;" \ 99 "uEnv.txt fat 1 1\0" 100 101 #define DFU_ALT_INFO_RAM \ 102 "dfu_alt_info_ram=" \ 103 "kernel ram 0x80200000 0x4000000;" \ 104 "fdt ram 0x80f80000 0x80000;" \ 105 "ramdisk ram 0x81000000 0x4000000\0" 106 107 #define DFU_ALT_INFO_QSPI \ 108 "dfu_alt_info_qspi=" \ 109 "MLO raw 0x0 0x010000;" \ 110 "MLO.backup1 raw 0x010000 0x010000;" \ 111 "MLO.backup2 raw 0x020000 0x010000;" \ 112 "MLO.backup3 raw 0x030000 0x010000;" \ 113 "u-boot.img raw 0x040000 0x0100000;" \ 114 "u-boot-spl-os raw 0x140000 0x080000;" \ 115 "u-boot-env raw 0x1C0000 0x010000;" \ 116 "u-boot-env.backup raw 0x1D0000 0x010000;" \ 117 "kernel raw 0x1E0000 0x800000\0" 118 119 #define DFUARGS \ 120 "dfu_bufsiz=0x10000\0" \ 121 DFU_ALT_INFO_MMC \ 122 DFU_ALT_INFO_EMMC \ 123 DFU_ALT_INFO_RAM \ 124 DFU_ALT_INFO_QSPI 125 126 /* Fastboot */ 127 #define CONFIG_USB_FUNCTION_FASTBOOT 128 #define CONFIG_CMD_FASTBOOT 129 #define CONFIG_ANDROID_BOOT_IMAGE 130 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 131 #define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 132 #define CONFIG_FASTBOOT_FLASH 133 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 134 #endif 135 136 #include <configs/ti_omap5_common.h> 137 138 /* Enhance our eMMC support / experience. */ 139 #define CONFIG_CMD_GPT 140 #define CONFIG_EFI_PARTITION 141 #define CONFIG_RANDOM_UUID 142 #define CONFIG_HSMMC2_8BIT 143 144 /* CPSW Ethernet */ 145 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 146 #define CONFIG_BOOTP_DNS2 147 #define CONFIG_BOOTP_SEND_HOSTNAME 148 #define CONFIG_BOOTP_GATEWAY 149 #define CONFIG_BOOTP_SUBNETMASK 150 #define CONFIG_NET_RETRY_COUNT 10 151 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 152 #define CONFIG_MII /* Required in net/eth.c */ 153 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 154 #define CONFIG_PHYLIB 155 #define CONFIG_PHY_TI 156 157 /* SPI */ 158 #undef CONFIG_OMAP3_SPI 159 #define CONFIG_TI_SPI_MMAP 160 #define CONFIG_SF_DEFAULT_SPEED 64000000 161 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 162 #define CONFIG_QSPI_QUAD_SUPPORT 163 164 #ifdef CONFIG_SPL_BUILD 165 #undef CONFIG_DM_SPI 166 #undef CONFIG_DM_SPI_FLASH 167 #endif 168 169 /* 170 * Default to using SPI for environment, etc. 171 * 0x000000 - 0x010000 : QSPI.SPL (64KiB) 172 * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB) 173 * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB) 174 * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB) 175 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 176 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 177 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 178 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 179 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 180 * 0x9E0000 - 0x2000000 : USERLAND 181 */ 182 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 183 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 184 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 185 #if defined(CONFIG_QSPI_BOOT) 186 /* In SPL, use the environment and discard MMC support for space. */ 187 #ifdef CONFIG_SPL_BUILD 188 #undef CONFIG_SPL_MMC_SUPPORT 189 #undef CONFIG_SPL_MAX_SIZE 190 #define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ 191 #endif 192 #define CONFIG_SPL_ENV_SUPPORT 193 #define CONFIG_ENV_IS_IN_SPI_FLASH 194 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 195 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 196 #define CONFIG_ENV_SIZE (64 << 10) 197 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 198 #define CONFIG_ENV_OFFSET 0x1C0000 199 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 200 #endif 201 202 /* SPI SPL */ 203 #define CONFIG_SPL_SPI_SUPPORT 204 #define CONFIG_SPL_DMA_SUPPORT 205 #define CONFIG_TI_EDMA3 206 #define CONFIG_SPL_SPI_LOAD 207 #define CONFIG_SPL_SPI_FLASH_SUPPORT 208 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 209 210 #define CONFIG_SUPPORT_EMMC_BOOT 211 212 /* USB xHCI HOST */ 213 #define CONFIG_USB_HOST 214 #define CONFIG_USB_XHCI_OMAP 215 #define CONFIG_USB_STORAGE 216 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 217 218 #define CONFIG_OMAP_USB_PHY 219 #define CONFIG_OMAP_USB2PHY2_HOST 220 221 /* USB Device Firmware Update support */ 222 #define CONFIG_USB_FUNCTION_DFU 223 #define CONFIG_DFU_RAM 224 225 #define CONFIG_DFU_MMC 226 #define CONFIG_DFU_RAM 227 #define CONFIG_DFU_SF 228 229 /* SATA */ 230 #define CONFIG_BOARD_LATE_INIT 231 #define CONFIG_SCSI 232 #define CONFIG_LIBATA 233 #define CONFIG_SCSI_AHCI 234 #define CONFIG_SCSI_AHCI_PLAT 235 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 236 #define CONFIG_SYS_SCSI_MAX_LUN 1 237 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 238 CONFIG_SYS_SCSI_MAX_LUN) 239 240 /* NAND support */ 241 #ifdef CONFIG_NAND 242 /* NAND: device related configs */ 243 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 244 #define CONFIG_SYS_NAND_OOBSIZE 64 245 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 246 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 247 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 248 CONFIG_SYS_NAND_PAGE_SIZE) 249 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 250 /* NAND: driver related configs */ 251 #define CONFIG_NAND_OMAP_GPMC 252 #define CONFIG_NAND_OMAP_ELM 253 #define CONFIG_SYS_NAND_ONFI_DETECTION 254 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 255 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 256 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 257 10, 11, 12, 13, 14, 15, 16, 17, \ 258 18, 19, 20, 21, 22, 23, 24, 25, \ 259 26, 27, 28, 29, 30, 31, 32, 33, \ 260 34, 35, 36, 37, 38, 39, 40, 41, \ 261 42, 43, 44, 45, 46, 47, 48, 49, \ 262 50, 51, 52, 53, 54, 55, 56, 57, } 263 #define CONFIG_SYS_NAND_ECCSIZE 512 264 #define CONFIG_SYS_NAND_ECCBYTES 14 265 #define MTDIDS_DEFAULT "nand0=nand.0" 266 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 267 "128k(NAND.SPL)," \ 268 "128k(NAND.SPL.backup1)," \ 269 "128k(NAND.SPL.backup2)," \ 270 "128k(NAND.SPL.backup3)," \ 271 "256k(NAND.u-boot-spl-os)," \ 272 "1m(NAND.u-boot)," \ 273 "128k(NAND.u-boot-env)," \ 274 "128k(NAND.u-boot-env.backup1)," \ 275 "8m(NAND.kernel)," \ 276 "-(NAND.file-system)" 277 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 278 /* NAND: SPL related configs */ 279 #ifdef CONFIG_SPL_NAND_SUPPORT 280 #define CONFIG_SPL_NAND_AM33XX_BCH 281 #endif 282 /* NAND: SPL falcon mode configs */ 283 #ifdef CONFIG_SPL_OS_BOOT 284 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ 285 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ 286 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 287 #endif 288 #endif /* !CONFIG_NAND */ 289 290 /* Parallel NOR Support */ 291 #if defined(CONFIG_NOR) 292 /* NOR: device related configs */ 293 #define CONFIG_SYS_MAX_FLASH_SECT 512 294 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 295 #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ 296 /* #define CONFIG_INIT_IGNORE_ERROR */ 297 #undef CONFIG_SYS_NO_FLASH 298 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 299 #define CONFIG_SYS_FLASH_PROTECTION 300 #define CONFIG_SYS_FLASH_CFI 301 #define CONFIG_FLASH_CFI_DRIVER 302 #define CONFIG_FLASH_CFI_MTD 303 #define CONFIG_SYS_MAX_FLASH_BANKS 1 304 #define CONFIG_SYS_FLASH_BASE (0x08000000) 305 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 306 /* Reduce SPL size by removing unlikey targets */ 307 #ifdef CONFIG_NOR_BOOT 308 #define CONFIG_ENV_IS_IN_FLASH 309 #define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */ 310 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 311 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 312 "128k(NOR.SPL)," \ 313 "128k(NOR.SPL.backup1)," \ 314 "128k(NOR.SPL.backup2)," \ 315 "128k(NOR.SPL.backup3)," \ 316 "256k(NOR.u-boot-spl-os)," \ 317 "1m(NOR.u-boot)," \ 318 "128k(NOR.u-boot-env)," \ 319 "128k(NOR.u-boot-env.backup1)," \ 320 "8m(NOR.kernel)," \ 321 "-(NOR.rootfs)" 322 #define CONFIG_ENV_OFFSET 0x001c0000 323 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 324 #endif 325 #endif /* NOR support */ 326 327 /* EEPROM */ 328 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 329 #define CONFIG_EEPROM_BUS_ADDRESS 0 330 331 #endif /* __CONFIG_DRA7XX_EVM_H */ 332