1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Lokesh Vutla <lokeshvutla@ti.com> 5 * 6 * Configuration settings for the TI DRA7XX board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_DRA7XX_EVM_H 13 #define __CONFIG_DRA7XX_EVM_H 14 15 #define CONFIG_DRA7XX 16 #define CONFIG_BOARD_EARLY_INIT_F 17 18 #ifndef CONFIG_QSPI_BOOT 19 /* MMC ENV related defines */ 20 #define CONFIG_ENV_IS_IN_MMC 21 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 22 #define CONFIG_ENV_SIZE (128 << 10) 23 #define CONFIG_ENV_OFFSET 0xE0000 24 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 25 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 26 #endif 27 #define CONFIG_CMD_SAVEENV 28 29 #if (CONFIG_CONS_INDEX == 1) 30 #define CONSOLEDEV "ttyO0" 31 #elif (CONFIG_CONS_INDEX == 3) 32 #define CONSOLEDEV "ttyO2" 33 #endif 34 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 35 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 36 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 37 #define CONFIG_BAUDRATE 115200 38 39 #define CONFIG_SYS_OMAP_ABE_SYSCK 40 41 /* Define the default GPT table for eMMC */ 42 #define PARTS_DEFAULT \ 43 "uuid_disk=${uuid_gpt_disk};" \ 44 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 45 46 #include <configs/ti_omap5_common.h> 47 48 /* Enhance our eMMC support / experience. */ 49 #define CONFIG_CMD_GPT 50 #define CONFIG_EFI_PARTITION 51 #define CONFIG_HSMMC2_8BIT 52 53 /* CPSW Ethernet */ 54 #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ 55 #define CONFIG_CMD_DHCP 56 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 57 #define CONFIG_BOOTP_DNS2 58 #define CONFIG_BOOTP_SEND_HOSTNAME 59 #define CONFIG_BOOTP_GATEWAY 60 #define CONFIG_BOOTP_SUBNETMASK 61 #define CONFIG_NET_RETRY_COUNT 10 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_MII 64 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 65 #define CONFIG_MII /* Required in net/eth.c */ 66 #define CONFIG_PHY_GIGE /* per-board part of CPSW */ 67 #define CONFIG_PHYLIB 68 69 /* SPI */ 70 #undef CONFIG_OMAP3_SPI 71 #define CONFIG_TI_QSPI 72 #define CONFIG_SPI_FLASH 73 #define CONFIG_SPI_FLASH_SPANSION 74 #define CONFIG_CMD_SF 75 #define CONFIG_CMD_SPI 76 #define CONFIG_SPI_FLASH_BAR 77 #define CONFIG_TI_SPI_MMAP 78 #define CONFIG_SF_DEFAULT_SPEED 48000000 79 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 80 #define CONFIG_QSPI_QUAD_SUPPORT 81 82 /* 83 * Default to using SPI for environment, etc. 84 * 0x000000 - 0x010000 : QSPI.SPL (64KiB) 85 * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB) 86 * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB) 87 * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB) 88 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) 89 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) 90 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) 91 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) 92 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) 93 * 0x9E0000 - 0x2000000 : USERLAND 94 */ 95 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 96 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 97 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 98 #if defined(CONFIG_QSPI_BOOT) 99 /* In SPL, use the environment and discard MMC support for space. */ 100 #ifdef CONFIG_SPL_BUILD 101 #undef CONFIG_SPL_MMC_SUPPORT 102 #undef CONFIG_SPL_MAX_SIZE 103 #define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ 104 #endif 105 #define CONFIG_SPL_ENV_SUPPORT 106 #define CONFIG_ENV_IS_IN_SPI_FLASH 107 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 108 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 109 #define CONFIG_ENV_SIZE (64 << 10) 110 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 111 #define CONFIG_ENV_OFFSET 0x1C0000 112 #define CONFIG_ENV_OFFSET_REDUND 0x1D0000 113 #endif 114 115 /* SPI SPL */ 116 #define CONFIG_SPL_SPI_SUPPORT 117 #define CONFIG_SPL_SPI_LOAD 118 #define CONFIG_SPL_SPI_FLASH_SUPPORT 119 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 120 121 #define CONFIG_SUPPORT_EMMC_BOOT 122 123 /* USB xHCI HOST */ 124 #define CONFIG_CMD_USB 125 #define CONFIG_USB_HOST 126 #define CONFIG_USB_XHCI 127 #define CONFIG_USB_XHCI_OMAP 128 #define CONFIG_USB_STORAGE 129 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 130 131 #define CONFIG_OMAP_USB_PHY 132 #define CONFIG_OMAP_USB2PHY2_HOST 133 134 /* SATA */ 135 #define CONFIG_BOARD_LATE_INIT 136 #define CONFIG_CMD_SCSI 137 #define CONFIG_LIBATA 138 #define CONFIG_SCSI_AHCI 139 #define CONFIG_SCSI_AHCI_PLAT 140 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 141 #define CONFIG_SYS_SCSI_MAX_LUN 1 142 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 143 CONFIG_SYS_SCSI_MAX_LUN) 144 145 /* NAND support */ 146 #ifdef CONFIG_NAND 147 /* NAND: device related configs */ 148 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 149 #define CONFIG_SYS_NAND_OOBSIZE 64 150 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 151 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 152 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 153 CONFIG_SYS_NAND_PAGE_SIZE) 154 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 155 /* NAND: driver related configs */ 156 #define CONFIG_NAND_OMAP_GPMC 157 #define CONFIG_NAND_OMAP_ELM 158 #define CONFIG_SYS_NAND_ONFI_DETECTION 159 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 160 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 161 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 162 10, 11, 12, 13, 14, 15, 16, 17, \ 163 18, 19, 20, 21, 22, 23, 24, 25, \ 164 26, 27, 28, 29, 30, 31, 32, 33, \ 165 34, 35, 36, 37, 38, 39, 40, 41, \ 166 42, 43, 44, 45, 46, 47, 48, 49, \ 167 50, 51, 52, 53, 54, 55, 56, 57, } 168 #define CONFIG_SYS_NAND_ECCSIZE 512 169 #define CONFIG_SYS_NAND_ECCBYTES 14 170 #define MTDIDS_DEFAULT "nand0=nand.0" 171 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 172 "128k(NAND.SPL)," \ 173 "128k(NAND.SPL.backup1)," \ 174 "128k(NAND.SPL.backup2)," \ 175 "128k(NAND.SPL.backup3)," \ 176 "256k(NAND.u-boot-spl-os)," \ 177 "1m(NAND.u-boot)," \ 178 "128k(NAND.u-boot-env)," \ 179 "128k(NAND.u-boot-env.backup1)," \ 180 "8m(NAND.kernel)," \ 181 "-(NAND.rootfs)" 182 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 183 /* NAND: SPL related configs */ 184 #ifdef CONFIG_SPL_NAND_SUPPORT 185 #define CONFIG_SPL_NAND_AM33XX_BCH 186 #endif 187 /* NAND: SPL falcon mode configs */ 188 #ifdef CONFIG_SPL_OS_BOOT 189 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ 190 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ 191 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 192 #endif 193 #endif /* !CONFIG_NAND */ 194 195 /* Parallel NOR Support */ 196 #if defined(CONFIG_NOR) 197 /* NOR: device related configs */ 198 #define CONFIG_SYS_MAX_FLASH_SECT 512 199 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 200 #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ 201 /* #define CONFIG_INIT_IGNORE_ERROR */ 202 #undef CONFIG_SYS_NO_FLASH 203 #define CONFIG_CMD_FLASH 204 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 205 #define CONFIG_SYS_FLASH_PROTECTION 206 #define CONFIG_SYS_FLASH_CFI 207 #define CONFIG_FLASH_CFI_DRIVER 208 #define CONFIG_FLASH_CFI_MTD 209 #define CONFIG_SYS_MAX_FLASH_BANKS 1 210 #define CONFIG_SYS_FLASH_BASE (0x08000000) 211 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 212 /* Reduce SPL size by removing unlikey targets */ 213 #ifdef CONFIG_NOR_BOOT 214 #define CONFIG_ENV_IS_IN_FLASH 215 #define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */ 216 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 217 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 218 "128k(NOR.SPL)," \ 219 "128k(NOR.SPL.backup1)," \ 220 "128k(NOR.SPL.backup2)," \ 221 "128k(NOR.SPL.backup3)," \ 222 "256k(NOR.u-boot-spl-os)," \ 223 "1m(NOR.u-boot)," \ 224 "128k(NOR.u-boot-env)," \ 225 "128k(NOR.u-boot-env.backup1)," \ 226 "8m(NOR.kernel)," \ 227 "-(NOR.rootfs)" 228 #define CONFIG_ENV_OFFSET 0x001c0000 229 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 230 #endif 231 #endif /* NOR support */ 232 233 #endif /* __CONFIG_DRA7XX_EVM_H */ 234