xref: /openbmc/u-boot/include/configs/dra7xx_evm.h (revision 0649cd0d)
1 /*
2  * (C) Copyright 2013
3  * Texas Instruments Incorporated.
4  * Lokesh Vutla	  <lokeshvutla@ti.com>
5  *
6  * Configuration settings for the TI DRA7XX board.
7  * See ti_omap5_common.h for omap5 common settings.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __CONFIG_DRA7XX_EVM_H
13 #define __CONFIG_DRA7XX_EVM_H
14 
15 #include <environment/ti/dfu.h>
16 
17 #ifdef CONFIG_SPL_BUILD
18 #define CONFIG_IODELAY_RECALIBRATION
19 #endif
20 
21 #define CONFIG_VERY_BIG_RAM
22 #define CONFIG_NR_DRAM_BANKS		2
23 #define CONFIG_MAX_MEM_MAPPED		0x80000000
24 
25 #ifndef CONFIG_QSPI_BOOT
26 /* MMC ENV related defines */
27 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
28 #define CONFIG_ENV_SIZE			(128 << 10)
29 #define CONFIG_ENV_OFFSET		0x260000
30 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
31 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
32 #endif
33 
34 #if (CONFIG_CONS_INDEX == 1)
35 #define CONSOLEDEV			"ttyO0"
36 #elif (CONFIG_CONS_INDEX == 3)
37 #define CONSOLEDEV			"ttyO2"
38 #endif
39 #define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
40 #define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
41 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
42 
43 #define CONFIG_ENV_EEPROM_IS_ON_I2C
44 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
45 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
46 
47 #define CONFIG_SYS_OMAP_ABE_SYSCK
48 
49 #ifndef CONFIG_SPL_BUILD
50 /* Define the default GPT table for eMMC */
51 #define PARTS_DEFAULT \
52 	/* Linux partitions */ \
53 	"uuid_disk=${uuid_gpt_disk};" \
54 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
55 	/* Android partitions */ \
56 	"partitions_android=" \
57 	"uuid_disk=${uuid_gpt_disk};" \
58 	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
59 	"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
60 	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
61 	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
62 	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
63 	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
64 	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
65 	"name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
66 	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
67 	"name=system,size=768M,uuid=${uuid_gpt_system};" \
68 	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
69 	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
70 	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
71 	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
72 
73 #define DFUARGS \
74 	"dfu_bufsiz=0x10000\0" \
75 	DFU_ALT_INFO_MMC \
76 	DFU_ALT_INFO_EMMC \
77 	DFU_ALT_INFO_RAM \
78 	DFU_ALT_INFO_QSPI
79 #else
80 /* Discard fastboot in SPL build, to spare some space */
81 #undef CONFIG_FASTBOOT
82 #undef CONFIG_USB_FUNCTION_FASTBOOT
83 #undef CONFIG_CMD_FASTBOOT
84 #undef CONFIG_ANDROID_BOOT_IMAGE
85 #undef CONFIG_FASTBOOT_BUF_ADDR
86 #undef CONFIG_FASTBOOT_BUF_SIZE
87 #undef CONFIG_FASTBOOT_FLASH
88 #endif
89 
90 #ifdef CONFIG_SPL_BUILD
91 #undef CONFIG_CMD_BOOTD
92 #ifdef CONFIG_SPL_DFU_SUPPORT
93 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
94 #define DFUARGS \
95 	"dfu_bufsiz=0x10000\0" \
96 	DFU_ALT_INFO_RAM
97 #endif
98 #endif
99 
100 #include <configs/ti_omap5_common.h>
101 
102 /* Enhance our eMMC support / experience. */
103 #define CONFIG_RANDOM_UUID
104 #define CONFIG_HSMMC2_8BIT
105 
106 /* CPSW Ethernet */
107 #define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
108 #define CONFIG_BOOTP_DNS2
109 #define CONFIG_BOOTP_SEND_HOSTNAME
110 #define CONFIG_BOOTP_GATEWAY
111 #define CONFIG_BOOTP_SUBNETMASK
112 #define CONFIG_NET_RETRY_COUNT		10
113 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
114 #define CONFIG_MII			/* Required in net/eth.c */
115 #define CONFIG_PHY_TI
116 
117 /* SPI */
118 #define CONFIG_TI_SPI_MMAP
119 #define CONFIG_SF_DEFAULT_SPEED                76800000
120 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
121 #define CONFIG_QSPI_QUAD_SUPPORT
122 
123 /*
124  * Default to using SPI for environment, etc.
125  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
126  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
127  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
128  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
129  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
130  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
131  * 0x9E0000 - 0x2000000 : USERLAND
132  */
133 #define CONFIG_SYS_SPI_KERNEL_OFFS	0x1E0000
134 #define CONFIG_SYS_SPI_ARGS_OFFS	0x140000
135 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
136 #if defined(CONFIG_QSPI_BOOT)
137 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
138 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
139 #define CONFIG_ENV_SIZE			(64 << 10)
140 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64 KB sectors */
141 #define CONFIG_ENV_OFFSET		0x1C0000
142 #define CONFIG_ENV_OFFSET_REDUND	0x1D0000
143 #endif
144 
145 /* SPI SPL */
146 #define CONFIG_TI_EDMA3
147 #define CONFIG_SPL_SPI_LOAD
148 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
149 
150 #define CONFIG_SUPPORT_EMMC_BOOT
151 
152 /* USB xHCI HOST */
153 #define CONFIG_USB_XHCI_OMAP
154 
155 #define CONFIG_OMAP_USB_PHY
156 #define CONFIG_OMAP_USB2PHY2_HOST
157 
158 /* SATA */
159 #define CONFIG_LIBATA
160 #define CONFIG_SCSI_AHCI
161 #define CONFIG_SCSI_AHCI_PLAT
162 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
163 #define CONFIG_SYS_SCSI_MAX_LUN		1
164 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
165 						CONFIG_SYS_SCSI_MAX_LUN)
166 
167 /* NAND support */
168 #ifdef CONFIG_NAND
169 /* NAND: device related configs */
170 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
171 #define CONFIG_SYS_NAND_OOBSIZE		64
172 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
173 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
174 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
175 					 CONFIG_SYS_NAND_PAGE_SIZE)
176 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
177 /* NAND: driver related configs */
178 #define CONFIG_NAND_OMAP_GPMC
179 #define CONFIG_NAND_OMAP_ELM
180 #define CONFIG_SYS_NAND_ONFI_DETECTION
181 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
182 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
183 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
184 					 10, 11, 12, 13, 14, 15, 16, 17, \
185 					 18, 19, 20, 21, 22, 23, 24, 25, \
186 					 26, 27, 28, 29, 30, 31, 32, 33, \
187 					 34, 35, 36, 37, 38, 39, 40, 41, \
188 					 42, 43, 44, 45, 46, 47, 48, 49, \
189 					 50, 51, 52, 53, 54, 55, 56, 57, }
190 #define CONFIG_SYS_NAND_ECCSIZE		512
191 #define CONFIG_SYS_NAND_ECCBYTES	14
192 #define MTDIDS_DEFAULT			"nand0=nand.0"
193 #define MTDPARTS_DEFAULT		"mtdparts=nand.0:" \
194 					"128k(NAND.SPL)," \
195 					"128k(NAND.SPL.backup1)," \
196 					"128k(NAND.SPL.backup2)," \
197 					"128k(NAND.SPL.backup3)," \
198 					"256k(NAND.u-boot-spl-os)," \
199 					"1m(NAND.u-boot)," \
200 					"128k(NAND.u-boot-env)," \
201 					"128k(NAND.u-boot-env.backup1)," \
202 					"8m(NAND.kernel)," \
203 					"-(NAND.file-system)"
204 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
205 /* NAND: SPL related configs */
206 #ifdef CONFIG_SPL_NAND_SUPPORT
207 #define CONFIG_SPL_NAND_AM33XX_BCH
208 #endif
209 /* NAND: SPL falcon mode configs */
210 #ifdef CONFIG_SPL_OS_BOOT
211 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
212 #endif
213 #endif /* !CONFIG_NAND */
214 
215 /* Parallel NOR Support */
216 #if defined(CONFIG_NOR)
217 /* NOR: device related configs */
218 #define CONFIG_SYS_MAX_FLASH_SECT	512
219 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
220 #define CONFIG_SYS_FLASH_SIZE		(64 * 1024 * 1024) /* 64 MB */
221 /* #define CONFIG_INIT_IGNORE_ERROR */
222 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
223 #define CONFIG_SYS_FLASH_PROTECTION
224 #define CONFIG_SYS_FLASH_CFI
225 #define CONFIG_FLASH_CFI_DRIVER
226 #define CONFIG_FLASH_CFI_MTD
227 #define CONFIG_SYS_MAX_FLASH_BANKS	1
228 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
229 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
230 /* Reduce SPL size by removing unlikey targets */
231 #ifdef CONFIG_NOR_BOOT
232 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)	/* 128 KiB */
233 #define MTDIDS_DEFAULT			"nor0=physmap-flash.0"
234 #define MTDPARTS_DEFAULT		"mtdparts=physmap-flash.0:" \
235 					"128k(NOR.SPL)," \
236 					"128k(NOR.SPL.backup1)," \
237 					"128k(NOR.SPL.backup2)," \
238 					"128k(NOR.SPL.backup3)," \
239 					"256k(NOR.u-boot-spl-os)," \
240 					"1m(NOR.u-boot)," \
241 					"128k(NOR.u-boot-env)," \
242 					"128k(NOR.u-boot-env.backup1)," \
243 					"8m(NOR.kernel)," \
244 					"-(NOR.rootfs)"
245 #define CONFIG_ENV_OFFSET		0x001c0000
246 #define CONFIG_ENV_OFFSET_REDUND	0x001e0000
247 #endif
248 #endif  /* NOR support */
249 
250 #endif /* __CONFIG_DRA7XX_EVM_H */
251