1 /* 2 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 3 * 4 * Based on sheevaplug.h originally written by 5 * Prafulla Wadaskar <prafulla@marvell.com> 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DOCKSTAR_H 13 #define _CONFIG_DOCKSTAR_H 14 15 #define CONFIG_SYS_GENERIC_BOARD 16 17 /* 18 * Version number information 19 */ 20 #define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" 21 22 /* 23 * High Level Configuration Options (easy to change) 24 */ 25 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 26 #define CONFIG_KW88F6281 1 /* SOC Name */ 27 #define CONFIG_MACH_DOCKSTAR /* Machine type */ 28 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 29 30 /* 31 * Commands configuration 32 */ 33 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 34 #define CONFIG_CMD_DHCP 35 #define CONFIG_CMD_ENV 36 #define CONFIG_CMD_MII 37 #define CONFIG_CMD_NAND 38 #define CONFIG_CMD_PING 39 #define CONFIG_CMD_USB 40 /* 41 * mv-common.h should be defined after CMD configs since it used them 42 * to enable certain macros 43 */ 44 #include "mv-common.h" 45 46 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 47 #define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */ 48 49 /* 50 * Environment variables configurations 51 */ 52 #ifdef CONFIG_CMD_NAND 53 #define CONFIG_ENV_IS_IN_NAND 1 54 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 55 #else 56 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 57 #endif 58 /* 59 * max 4k env size is enough, but in case of nand 60 * it has to be rounded to sector size 61 */ 62 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 63 #define CONFIG_ENV_ADDR 0x60000 64 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 65 66 /* 67 * Default environment variables 68 */ 69 #define CONFIG_BOOTCOMMAND \ 70 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 71 "ubi part root; " \ 72 "ubifsmount ubi:root; " \ 73 "ubifsload 0x800000 ${kernel}; " \ 74 "ubifsload 0x1100000 ${initrd}; " \ 75 "bootm 0x800000 0x1100000" 76 77 #define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" 78 79 #define CONFIG_EXTRA_ENV_SETTINGS \ 80 "console=console=ttyS0,115200\0" \ 81 "mtdids=nand0=orion_nand\0" \ 82 "mtdparts="CONFIG_MTDPARTS \ 83 "kernel=/boot/uImage\0" \ 84 "initrd=/boot/uInitrd\0" \ 85 "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" 86 87 /* 88 * Ethernet Driver configuration 89 */ 90 #ifdef CONFIG_CMD_NET 91 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 92 #define CONFIG_PHY_BASE_ADR 0 93 #endif /* CONFIG_CMD_NET */ 94 95 /* 96 * File system 97 */ 98 #define CONFIG_CMD_EXT2 99 #define CONFIG_CMD_FAT 100 #define CONFIG_CMD_JFFS2 101 #define CONFIG_CMD_UBI 102 #define CONFIG_CMD_UBIFS 103 #define CONFIG_RBTREE 104 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 105 #define CONFIG_MTD_PARTITIONS 106 #define CONFIG_CMD_MTDPARTS 107 #define CONFIG_LZO 108 109 #endif /* _CONFIG_DOCKSTAR_H */ 110