1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2011 4 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> 5 * 6 * Based on Kirkwood support: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 */ 11 12 #ifndef _CONFIG_DNS325_H 13 #define _CONFIG_DNS325_H 14 15 /* 16 * Machine number definition 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* 28 * Commands configuration 29 */ 30 31 /* 32 * mv-common.h should be defined after CMD configs since it used them 33 * to enable certain macros 34 */ 35 #include "mv-common.h" 36 37 /* Remove or override few declarations from mv-common.h */ 38 39 /* 40 * Ethernet Driver configuration 41 */ 42 #ifdef CONFIG_CMD_NET 43 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 44 #define CONFIG_NETCONSOLE 45 #endif 46 47 /* 48 * SATA Driver configuration 49 */ 50 #ifdef CONFIG_MVSATA_IDE 51 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 52 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 53 #endif 54 55 /* 56 * Enable GPI0 support 57 */ 58 #define CONFIG_KIRKWOOD_GPIO 59 60 /* 61 * Environment variables configurations 62 */ 63 #ifdef CONFIG_CMD_NAND 64 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ 65 #endif 66 67 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ 68 #define CONFIG_ENV_ADDR 0xe0000 69 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ 70 71 /* 72 * Default environment variables 73 */ 74 75 #define CONFIG_EXTRA_ENV_SETTINGS \ 76 "stdin=serial\0" \ 77 "stdout=serial\0" \ 78 "stderr=serial\0" \ 79 "loadaddr=0x800000\0" \ 80 "autoload=no\0" \ 81 "console=ttyS0,115200\0" \ 82 "mtdparts="CONFIG_MTDPARTS_DEFAULT \ 83 "optargs=\0" \ 84 "bootenv=uEnv.txt\0" \ 85 "importbootenv=echo Importing environment ...; " \ 86 "env import -t ${loadaddr} ${filesize}\0" \ 87 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ 88 "setbootargs=setenv bootargs console=${console} " \ 89 "${optargs} " \ 90 "${mtdparts} " \ 91 "root=${bootenvroot} " \ 92 "rootfstype=${bootenvrootfstype}\0" \ 93 "subbootcmd=run setbootargs; " \ 94 "if run bootenvloadimage; then " \ 95 "bootm ${loadaddr};" \ 96 "fi;\0" \ 97 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ 98 "nandrootfstype=ubifs\0" \ 99 "nandloadimage=nand read ${loadaddr} kernel\0" \ 100 "setnandbootenv=echo Booting from nand ...; " \ 101 "setenv bootenvroot ${nandroot}; " \ 102 "setenv bootenvrootfstype ${nandrootfstype}; " \ 103 "setenv bootenvloadimage ${nandloadimage}\0" 104 105 #define CONFIG_BOOTCOMMAND \ 106 "if test -n ${bootenv} && usb start; then " \ 107 "if run loadbootenv; then " \ 108 "echo Loaded environment ${bootenv} from usb;" \ 109 "run importbootenv;" \ 110 "fi;" \ 111 "if test -n ${bootenvcmd}; then " \ 112 "echo Running bootenvcmd ...;" \ 113 "run bootenvcmd;" \ 114 "fi;" \ 115 "fi;" \ 116 "run setnandbootenv subbootcmd;" 117 118 #endif /* _CONFIG_DNS325_H */ 119