1*83d290c5STom Rini /* SPDX-License-Identifier: GPL-2.0+ */ 2bfacf466SStefan /* 3bfacf466SStefan * Copyright (C) 2011 416437a19SStefan Herbrechtsmeier * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> 5bfacf466SStefan * 6bfacf466SStefan * Based on Kirkwood support: 7bfacf466SStefan * (C) Copyright 2009 8bfacf466SStefan * Marvell Semiconductor <www.marvell.com> 9bfacf466SStefan * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10bfacf466SStefan */ 11bfacf466SStefan 12bfacf466SStefan #ifndef _CONFIG_DNS325_H 13bfacf466SStefan #define _CONFIG_DNS325_H 14bfacf466SStefan 15bfacf466SStefan /* 16bfacf466SStefan * Machine number definition 17bfacf466SStefan */ 18bfacf466SStefan #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 19bfacf466SStefan 20bfacf466SStefan /* 21bfacf466SStefan * High Level Configuration Options (easy to change) 22bfacf466SStefan */ 23bfacf466SStefan #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 24bfacf466SStefan #define CONFIG_KW88F6281 /* SOC Name */ 25bfacf466SStefan #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26bfacf466SStefan 27bfacf466SStefan /* 28bfacf466SStefan * Commands configuration 29bfacf466SStefan */ 30bfacf466SStefan 31bfacf466SStefan /* 32bfacf466SStefan * mv-common.h should be defined after CMD configs since it used them 33bfacf466SStefan * to enable certain macros 34bfacf466SStefan */ 35bfacf466SStefan #include "mv-common.h" 36bfacf466SStefan 37bfacf466SStefan /* Remove or override few declarations from mv-common.h */ 38bfacf466SStefan 39bfacf466SStefan /* 40bfacf466SStefan * Ethernet Driver configuration 41bfacf466SStefan */ 42bfacf466SStefan #ifdef CONFIG_CMD_NET 43bfacf466SStefan #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 44bfacf466SStefan #define CONFIG_NETCONSOLE 45bfacf466SStefan #endif 46bfacf466SStefan 47bfacf466SStefan /* 48bfacf466SStefan * SATA Driver configuration 49bfacf466SStefan */ 50bfacf466SStefan #ifdef CONFIG_MVSATA_IDE 51bfacf466SStefan #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 52bfacf466SStefan #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 53bfacf466SStefan #endif 54bfacf466SStefan 55bfacf466SStefan /* 56bfacf466SStefan * Enable GPI0 support 57bfacf466SStefan */ 58bfacf466SStefan #define CONFIG_KIRKWOOD_GPIO 59bfacf466SStefan 60bfacf466SStefan /* 61bfacf466SStefan * Environment variables configurations 62bfacf466SStefan */ 63bfacf466SStefan #ifdef CONFIG_CMD_NAND 64bfacf466SStefan #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ 65bfacf466SStefan #endif 66bfacf466SStefan 67bfacf466SStefan #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ 68bfacf466SStefan #define CONFIG_ENV_ADDR 0xe0000 69bfacf466SStefan #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ 70bfacf466SStefan 71bfacf466SStefan /* 72bfacf466SStefan * Default environment variables 73bfacf466SStefan */ 74bfacf466SStefan 75bfacf466SStefan #define CONFIG_EXTRA_ENV_SETTINGS \ 76bfacf466SStefan "stdin=serial\0" \ 77bfacf466SStefan "stdout=serial\0" \ 78bfacf466SStefan "stderr=serial\0" \ 79bfacf466SStefan "loadaddr=0x800000\0" \ 80bfacf466SStefan "autoload=no\0" \ 81bfacf466SStefan "console=ttyS0,115200\0" \ 8243ede0bcSTom Rini "mtdparts="CONFIG_MTDPARTS_DEFAULT \ 83bfacf466SStefan "optargs=\0" \ 84bfacf466SStefan "bootenv=uEnv.txt\0" \ 85bfacf466SStefan "importbootenv=echo Importing environment ...; " \ 86bfacf466SStefan "env import -t ${loadaddr} ${filesize}\0" \ 87bfacf466SStefan "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ 88bfacf466SStefan "setbootargs=setenv bootargs console=${console} " \ 89bfacf466SStefan "${optargs} " \ 90bfacf466SStefan "${mtdparts} " \ 91bfacf466SStefan "root=${bootenvroot} " \ 92bfacf466SStefan "rootfstype=${bootenvrootfstype}\0" \ 93bfacf466SStefan "subbootcmd=run setbootargs; " \ 94bfacf466SStefan "if run bootenvloadimage; then " \ 95bfacf466SStefan "bootm ${loadaddr};" \ 96bfacf466SStefan "fi;\0" \ 97bfacf466SStefan "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ 98bfacf466SStefan "nandrootfstype=ubifs\0" \ 99bfacf466SStefan "nandloadimage=nand read ${loadaddr} kernel\0" \ 100bfacf466SStefan "setnandbootenv=echo Booting from nand ...; " \ 101bfacf466SStefan "setenv bootenvroot ${nandroot}; " \ 102bfacf466SStefan "setenv bootenvrootfstype ${nandrootfstype}; " \ 103bfacf466SStefan "setenv bootenvloadimage ${nandloadimage}\0" 104bfacf466SStefan 105bfacf466SStefan #define CONFIG_BOOTCOMMAND \ 106bfacf466SStefan "if test -n ${bootenv} && usb start; then " \ 107bfacf466SStefan "if run loadbootenv; then " \ 108bfacf466SStefan "echo Loaded environment ${bootenv} from usb;" \ 109bfacf466SStefan "run importbootenv;" \ 110bfacf466SStefan "fi;" \ 111bfacf466SStefan "if test -n ${bootenvcmd}; then " \ 112bfacf466SStefan "echo Running bootenvcmd ...;" \ 113bfacf466SStefan "run bootenvcmd;" \ 114bfacf466SStefan "fi;" \ 115bfacf466SStefan "fi;" \ 116bfacf466SStefan "run setnandbootenv subbootcmd;" 117bfacf466SStefan 118bfacf466SStefan #endif /* _CONFIG_DNS325_H */ 119