1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * board/config.h - configuration options, board specific 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <configs/x86-common.h> 15 16 #define CONFIG_SYS_MONITOR_LEN (1 << 20) 17 #define CONFIG_BOARD_EARLY_INIT_F 18 19 #ifndef CONFIG_INTERNAL_UART 20 /* Use BayTrail internal HS UART which is memory-mapped */ 21 #undef CONFIG_SYS_NS16550_PORT_MAPPED 22 #endif 23 24 #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ 25 "stdout=serial\0" \ 26 "stderr=serial\0" 27 28 #define CONFIG_SCSI_DEV_LIST \ 29 {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \ 30 {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT} 31 32 #define CONFIG_MMC 33 #define CONFIG_SDHCI 34 #define CONFIG_GENERIC_MMC 35 #define CONFIG_MMC_SDMA 36 37 #undef CONFIG_USB_MAX_CONTROLLER_COUNT 38 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 39 40 #define CONFIG_USB_HOST_ETHER 41 #define CONFIG_USB_ETHER_ASIX 42 #define CONFIG_USB_ETHER_SMSC95XX 43 #define CONFIG_USB_ETHER_MCS7830 44 #define CONFIG_USB_ETHER_RTL8152 45 46 #define VIDEO_IO_OFFSET 0 47 #define CONFIG_X86EMU_RAW_IO 48 #define CONFIG_CMD_BMP 49 50 #define CONFIG_ENV_SECT_SIZE 0x1000 51 #define CONFIG_ENV_OFFSET 0x006ef000 52 53 #undef CONFIG_BOOTARGS 54 #undef CONFIG_BOOTCOMMAND 55 56 #define CONFIG_BOOTARGS \ 57 "root=/dev/sda1 ro quiet" 58 #define CONFIG_BOOTCOMMAND \ 59 "load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ 60 "load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ 61 "run boot" 62 63 #undef CONFIG_EXTRA_ENV_SETTINGS 64 #define CONFIG_EXTRA_ENV_SETTINGS \ 65 "kernel-ver=4.4.0-24\0" \ 66 "boot=zboot 03000000 0 04000000 ${filesize}\0" \ 67 "upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \ 68 "sf probe;sf update 100000 0 800000;saveenv\0" 69 70 #define CONFIG_PREBOOT 71 72 #endif /* __CONFIG_H */ 73