xref: /openbmc/u-boot/include/configs/devkit8000.h (revision baefb63a)
1 /*
2  * (C) Copyright 2006-2008
3  * Texas Instruments.
4  * Richard Woodruff <r-woodruff2@ti.com>
5  * Syed Mohammed Khasim <x0khasim@ti.com>
6  *
7  * (C) Copyright 2009
8  * Frederik Kriewitz <frederik@kriewitz.eu>
9  *
10  * Configuration settings for the DevKit8000 board.
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17 
18 /* High Level Configuration Options */
19 #define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
20 
21 /*
22  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
23  * 64 bytes before this address should be set aside for u-boot.img's
24  * header. That is 0x800FFFC0--0x80100000 should not be used for any
25  * other needs.
26  */
27 #define CONFIG_SYS_TEXT_BASE	0x80100000
28 
29 #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
30 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
31 
32 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
33 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
34 
35 /*  Physical Memory Map  */
36 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
37 
38 #include <configs/ti_omap3_common.h>
39 
40 #define CONFIG_MISC_INIT_R
41 
42 #define CONFIG_REVISION_TAG		1
43 
44 /* Size of malloc() pool */
45 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
46 						/* Sector */
47 #undef CONFIG_SYS_MALLOC_LEN
48 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
49 
50 /* Hardware drivers */
51 /* DM9000 */
52 #define CONFIG_NET_RETRY_COUNT		20
53 #define	CONFIG_DRIVER_DM9000		1
54 #define	CONFIG_DM9000_BASE		0x2c000000
55 #define	DM9000_IO			CONFIG_DM9000_BASE
56 #define	DM9000_DATA			(CONFIG_DM9000_BASE + 0x400)
57 #define	CONFIG_DM9000_USE_16BIT		1
58 #define CONFIG_DM9000_NO_SROM		1
59 #undef	CONFIG_DM9000_DEBUG
60 
61 /* SPI */
62 #undef CONFIG_SPI
63 
64 /* I2C */
65 
66 /* TWL4030 */
67 #define CONFIG_TWL4030_LED		1
68 
69 /* Board NAND Info */
70 
71 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
72 							/* to access nand */
73 #define CONFIG_JFFS2_NAND
74 /* nand device jffs2 lives on */
75 #define CONFIG_JFFS2_DEV		"nand0"
76 /* start of jffs2 partition */
77 #define CONFIG_JFFS2_PART_OFFSET	0x680000
78 #define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
79 							/* partition */
80 
81 #undef CONFIG_SUPPORT_RAW_INITRD
82 
83 /* BOOTP/DHCP options */
84 #define CONFIG_BOOTP_SUBNETMASK
85 #define CONFIG_BOOTP_GATEWAY
86 #define CONFIG_BOOTP_HOSTNAME
87 #define CONFIG_BOOTP_NISDOMAIN
88 #define CONFIG_BOOTP_BOOTPATH
89 #define CONFIG_BOOTP_BOOTFILESIZE
90 #define CONFIG_BOOTP_DNS
91 #define CONFIG_BOOTP_DNS2
92 #define CONFIG_BOOTP_SEND_HOSTNAME
93 #define CONFIG_BOOTP_NTPSERVER
94 #define CONFIG_BOOTP_TIMEOFFSET
95 #undef CONFIG_BOOTP_VENDOREX
96 
97 /* Environment information */
98 #define CONFIG_EXTRA_ENV_SETTINGS \
99 	"loadaddr=0x82000000\0" \
100 	"console=ttyO2,115200n8\0" \
101 	"mmcdev=0\0" \
102 	"vram=12M\0" \
103 	"dvimode=1024x768MR-16@60\0" \
104 	"defaultdisplay=dvi\0" \
105 	"nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
106 	"kernelopts=rw\0" \
107 	"commonargs=" \
108 		"setenv bootargs console=${console} " \
109 		"vram=${vram} " \
110 		"omapfb.mode=dvi:${dvimode} " \
111 		"omapdss.def_disp=${defaultdisplay}\0" \
112 	"mmcargs=" \
113 		"run commonargs; " \
114 		"setenv bootargs ${bootargs} " \
115 		"root=/dev/mmcblk0p2 " \
116 		"rootwait " \
117 		"${kernelopts}\0" \
118 	"nandargs=" \
119 		"run commonargs; " \
120 		"setenv bootargs ${bootargs} " \
121 		"omapfb.mode=dvi:${dvimode} " \
122 		"omapdss.def_disp=${defaultdisplay} " \
123 		"root=/dev/mtdblock4 " \
124 		"rootfstype=jffs2 " \
125 		"${kernelopts}\0" \
126 	"netargs=" \
127 		"run commonargs; " \
128 		"setenv bootargs ${bootargs} " \
129 		"root=/dev/nfs " \
130 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
131 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
132 		"${kernelopts} " \
133 		"dnsip1=${dnsip} " \
134 		"dnsip2=${dnsip2}\0" \
135 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
136 	"bootscript=echo Running bootscript from mmc ...; " \
137 		"source ${loadaddr}\0" \
138 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
139 	"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
140 	"mmcboot=echo Booting from mmc ...; " \
141 		"run mmcargs; " \
142 		"bootm ${loadaddr}\0" \
143 	"nandboot=echo Booting from nand ...; " \
144 		"run nandargs; " \
145 		"nand read ${loadaddr} 280000 400000; " \
146 		"bootm ${loadaddr}\0" \
147 	"netboot=echo Booting from network ...; " \
148 		"dhcp ${loadaddr}; " \
149 		"run netargs; " \
150 		"bootm ${loadaddr}\0" \
151 	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
152 			"if run loadbootscript; then " \
153 				"run bootscript; " \
154 			"else " \
155 				"if run loaduimage; then " \
156 					"run mmcboot; " \
157 				"else run nandboot; " \
158 				"fi; " \
159 			"fi; " \
160 		"else run nandboot; fi\0"
161 
162 #define CONFIG_BOOTCOMMAND "run autoboot"
163 
164 /* Boot Argument Buffer Size */
165 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x07000000)
166 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
167 					0x01000000) /* 16MB */
168 
169 /* NAND and environment organization  */
170 
171 #define CONFIG_ENV_OFFSET		0x260000
172 
173 /* SRAM config */
174 #define CONFIG_SYS_SRAM_START              0x40200000
175 #define CONFIG_SYS_SRAM_SIZE               0x10000
176 
177 /* Defines for SPL */
178 
179 #undef CONFIG_SPL_TEXT_BASE
180 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
181 
182 /* NAND boot config */
183 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
184 #define CONFIG_SYS_NAND_PAGE_COUNT	64
185 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
186 #define CONFIG_SYS_NAND_OOBSIZE		64
187 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
188 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
189 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
190 						10, 11, 12, 13}
191 
192 #define CONFIG_SYS_NAND_ECCSIZE		512
193 #define CONFIG_SYS_NAND_ECCBYTES	3
194 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
195 
196 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
197 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
198 
199 /* SPL OS boot options */
200 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
201 
202 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
203 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
204 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
205 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
206 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
207 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
208 
209 #undef CONFIG_SYS_SPL_ARGS_ADDR
210 #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
211 
212 #endif /* __CONFIG_H */
213