1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * (C) Copyright 2009 8 * Frederik Kriewitz <frederik@kriewitz.eu> 9 * 10 * Configuration settings for the DevKit8000 board. 11 * 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 34 /* High Level Configuration Options */ 35 #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ 36 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 37 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 38 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 39 #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ 40 41 #define CONFIG_SYS_TEXT_BASE 0x80008000 42 43 #define CONFIG_SDRC /* The chip has SDRC controller */ 44 45 #include <asm/arch/cpu.h> /* get chip and board defs */ 46 #include <asm/arch/omap3.h> 47 48 /* Display CPU and Board information */ 49 #define CONFIG_DISPLAY_CPUINFO 1 50 #define CONFIG_DISPLAY_BOARDINFO 1 51 52 /* Clock Defines */ 53 #define V_OSCK 26000000 /* Clock output from T2 */ 54 #define V_SCLK (V_OSCK >> 1) 55 56 #undef CONFIG_USE_IRQ /* no support for IRQs */ 57 #define CONFIG_MISC_INIT_R 58 59 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 60 #define CONFIG_SETUP_MEMORY_TAGS 1 61 #define CONFIG_INITRD_TAG 1 62 #define CONFIG_REVISION_TAG 1 63 64 #define CONFIG_OF_LIBFDT 1 65 66 /* Size of malloc() pool */ 67 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 68 /* Sector */ 69 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 70 /* initial data */ 71 72 /* Hardware drivers */ 73 74 /* DDR - I use Micron DDR */ 75 #define CONFIG_OMAP3_MICRON_DDR 1 76 77 /* DM9000 */ 78 #define CONFIG_NET_MULTI 1 79 #define CONFIG_NET_RETRY_COUNT 20 80 #define CONFIG_DRIVER_DM9000 1 81 #define CONFIG_DM9000_BASE 0x2c000000 82 #define DM9000_IO CONFIG_DM9000_BASE 83 #define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) 84 #define CONFIG_DM9000_USE_16BIT 1 85 #define CONFIG_DM9000_NO_SROM 1 86 #undef CONFIG_DM9000_DEBUG 87 88 /* NS16550 Configuration */ 89 #define CONFIG_SYS_NS16550 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 92 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 93 94 /* select serial console configuration */ 95 #define CONFIG_CONS_INDEX 3 96 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 97 #define CONFIG_SERIAL3 3 98 #define CONFIG_BAUDRATE 115200 99 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 100 115200} 101 102 /* MMC */ 103 #define CONFIG_MMC 1 104 #define CONFIG_OMAP3_MMC 1 105 #define CONFIG_DOS_PARTITION 1 106 107 /* I2C */ 108 #define CONFIG_HARD_I2C 1 109 #define CONFIG_SYS_I2C_SPEED 100000 110 #define CONFIG_SYS_I2C_SLAVE 1 111 #define CONFIG_SYS_I2C_BUS 0 112 #define CONFIG_SYS_I2C_BUS_SELECT 1 113 #define CONFIG_DRIVER_OMAP34XX_I2C 1 114 115 /* TWL4030 */ 116 #define CONFIG_TWL4030_POWER 1 117 #define CONFIG_TWL4030_LED 1 118 119 /* Board NAND Info */ 120 #define CONFIG_SYS_NO_FLASH /* no NOR flash */ 121 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 122 #define MTDIDS_DEFAULT "nand0=nand" 123 #define MTDPARTS_DEFAULT "mtdparts=nand:" \ 124 "512k(x-loader)," \ 125 "1920k(u-boot)," \ 126 "128k(u-boot-env)," \ 127 "4m(kernel)," \ 128 "-(fs)" 129 130 #define CONFIG_NAND_OMAP_GPMC 131 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 132 /* to access nand */ 133 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 134 /* to access nand at */ 135 /* CS0 */ 136 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 137 138 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 139 /* devices */ 140 #define CONFIG_JFFS2_NAND 141 /* nand device jffs2 lives on */ 142 #define CONFIG_JFFS2_DEV "nand0" 143 /* start of jffs2 partition */ 144 #define CONFIG_JFFS2_PART_OFFSET 0x680000 145 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 146 /* partition */ 147 148 /* commands to include */ 149 #include <config_cmd_default.h> 150 151 #define CONFIG_CMD_DHCP /* DHCP support */ 152 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 153 #define CONFIG_CMD_FAT /* FAT support */ 154 #define CONFIG_CMD_I2C /* I2C serial bus support */ 155 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 156 #define CONFIG_CMD_MMC /* MMC support */ 157 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 158 #define CONFIG_CMD_NAND /* NAND support */ 159 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 160 161 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 162 #undef CONFIG_CMD_IMI /* iminfo */ 163 164 /* BOOTP/DHCP options */ 165 #define CONFIG_BOOTP_SUBNETMASK 166 #define CONFIG_BOOTP_GATEWAY 167 #define CONFIG_BOOTP_HOSTNAME 168 #define CONFIG_BOOTP_NISDOMAIN 169 #define CONFIG_BOOTP_BOOTPATH 170 #define CONFIG_BOOTP_BOOTFILESIZE 171 #define CONFIG_BOOTP_DNS 172 #define CONFIG_BOOTP_DNS2 173 #define CONFIG_BOOTP_SEND_HOSTNAME 174 #define CONFIG_BOOTP_NTPSERVER 175 #define CONFIG_BOOTP_TIMEOFFSET 176 #undef CONFIG_BOOTP_VENDOREX 177 178 /* Environment information */ 179 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ 180 181 #define CONFIG_BOOTDELAY 3 182 183 #define CONFIG_EXTRA_ENV_SETTINGS \ 184 "loadaddr=0x82000000\0" \ 185 "console=ttyS2,115200n8\0" \ 186 "vram=12M\0" \ 187 "dvimode=1024x768MR-16@60\0" \ 188 "defaultdisplay=dvi\0" \ 189 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ 190 "kernelopts=rw\0" \ 191 "commonargs=" \ 192 "setenv bootargs console=${console} " \ 193 "vram=${vram} " \ 194 "omapfb.mode=dvi:${dvimode} " \ 195 "omapdss.def_disp=${defaultdisplay}\0" \ 196 "mmcargs=" \ 197 "run commonargs; " \ 198 "setenv bootargs ${bootargs} " \ 199 "root=/dev/mmcblk0p2 " \ 200 "${kernelopts}\0" \ 201 "nandargs=" \ 202 "run commonargs; " \ 203 "setenv bootargs ${bootargs} " \ 204 "omapfb.mode=dvi:${dvimode} " \ 205 "omapdss.def_disp=${defaultdisplay} " \ 206 "root=/dev/mtdblock4 " \ 207 "rootfstype=jffs2 " \ 208 "${kernelopts}\0" \ 209 "netargs=" \ 210 "run commonargs; " \ 211 "setenv bootargs ${bootargs} " \ 212 "root=/dev/nfs " \ 213 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 214 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ 215 "${kernelopts} " \ 216 "dnsip1=${dnsip} " \ 217 "dnsip2=${dnsip2}\0" \ 218 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 219 "bootscript=echo Running bootscript from mmc ...; " \ 220 "source ${loadaddr}\0" \ 221 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 222 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ 223 "mmcboot=echo Booting from mmc ...; " \ 224 "run mmcargs; " \ 225 "bootm ${loadaddr}\0" \ 226 "nandboot=echo Booting from nand ...; " \ 227 "run nandargs; " \ 228 "nand read ${loadaddr} 280000 400000; " \ 229 "bootm ${loadaddr}\0" \ 230 "netboot=echo Booting from network ...; " \ 231 "dhcp ${loadaddr}; " \ 232 "run netargs; " \ 233 "bootm ${loadaddr}\0" \ 234 "autoboot=if mmc init 0; then " \ 235 "if run loadbootscript; then " \ 236 "run bootscript; " \ 237 "else " \ 238 "if run loaduimage; then " \ 239 "run mmcboot; " \ 240 "else run nandboot; " \ 241 "fi; " \ 242 "fi; " \ 243 "else run nandboot; fi\0" 244 245 246 #define CONFIG_BOOTCOMMAND "run autoboot" 247 248 /* Miscellaneous configurable options */ 249 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 250 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 251 #define CONFIG_AUTO_COMPLETE 1 252 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 253 #define CONFIG_SYS_PROMPT "OMAP3 DevKit8000 # " 254 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 255 /* Print Buffer Size */ 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 257 sizeof(CONFIG_SYS_PROMPT) + 16) 258 #define CONFIG_SYS_MAXARGS 128 /* max number of command args */ 259 260 /* Boot Argument Buffer Size */ 261 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 262 263 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) 264 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 265 0x01000000) /* 16MB */ 266 267 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 268 269 /* 270 * OMAP3 has 12 GP timers, they can be driven by the system clock 271 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 272 * This rate is divided by a local divisor. 273 */ 274 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 275 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 276 #define CONFIG_SYS_HZ 1000 277 278 /* The stack sizes are set up in start.S using the settings below */ 279 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 280 #ifdef CONFIG_USE_IRQ 281 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 282 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 283 #endif 284 285 /* Physical Memory Map */ 286 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 287 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 288 #define PHYS_SDRAM_1_SIZE (128 << 20) /* at least 128 MiB */ 289 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 290 291 /* SDRAM Bank Allocation method */ 292 #define SDRC_R_B_C 1 293 294 /* NAND and environment organization */ 295 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 296 297 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 298 299 #define CONFIG_ENV_IS_IN_NAND 1 300 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 301 302 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 303 304 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 305 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 306 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 307 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 308 CONFIG_SYS_INIT_RAM_SIZE - \ 309 GENERATED_GBL_DATA_SIZE) 310 311 #endif /* __CONFIG_H */ 312