1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * (C) Copyright 2009 8 * Frederik Kriewitz <frederik@kriewitz.eu> 9 * 10 * Configuration settings for the DevKit8000 board. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* High Level Configuration Options */ 19 #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ 20 #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 21 22 /* 23 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 24 * 64 bytes before this address should be set aside for u-boot.img's 25 * header. That is 0x800FFFC0--0x80100000 should not be used for any 26 * other needs. 27 */ 28 #define CONFIG_SYS_TEXT_BASE 0x80100000 29 30 #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ 31 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 32 33 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 34 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ 35 36 #define CONFIG_NAND 37 38 /* Physical Memory Map */ 39 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 40 41 #include <configs/ti_omap3_common.h> 42 43 /* Display CPU and Board information */ 44 #define CONFIG_DISPLAY_CPUINFO 1 45 #define CONFIG_DISPLAY_BOARDINFO 1 46 47 #define CONFIG_MISC_INIT_R 48 49 #define CONFIG_REVISION_TAG 1 50 51 /* Size of malloc() pool */ 52 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 53 /* Sector */ 54 #undef CONFIG_SYS_MALLOC_LEN 55 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 56 57 /* Hardware drivers */ 58 /* DM9000 */ 59 #define CONFIG_NET_RETRY_COUNT 20 60 #define CONFIG_DRIVER_DM9000 1 61 #define CONFIG_DM9000_BASE 0x2c000000 62 #define DM9000_IO CONFIG_DM9000_BASE 63 #define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) 64 #define CONFIG_DM9000_USE_16BIT 1 65 #define CONFIG_DM9000_NO_SROM 1 66 #undef CONFIG_DM9000_DEBUG 67 68 /* SPI */ 69 #undef CONFIG_SPI 70 #undef CONFIG_OMAP3_SPI 71 72 /* I2C */ 73 #undef CONFIG_SYS_I2C_OMAP24XX 74 #define CONFIG_SYS_I2C_OMAP34XX 75 76 /* TWL4030 */ 77 #define CONFIG_TWL4030_LED 1 78 79 /* Board NAND Info */ 80 #define MTDIDS_DEFAULT "nand0=nand" 81 #define MTDPARTS_DEFAULT "mtdparts=nand:" \ 82 "512k(x-loader)," \ 83 "1920k(u-boot)," \ 84 "128k(u-boot-env)," \ 85 "4m(kernel)," \ 86 "-(fs)" 87 88 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 89 /* to access nand */ 90 #define CONFIG_JFFS2_NAND 91 /* nand device jffs2 lives on */ 92 #define CONFIG_JFFS2_DEV "nand0" 93 /* start of jffs2 partition */ 94 #define CONFIG_JFFS2_PART_OFFSET 0x680000 95 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 96 /* partition */ 97 98 /* commands to include */ 99 #define CONFIG_CMD_DHCP /* DHCP support */ 100 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 101 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 102 103 #undef CONFIG_CMD_SPI 104 #undef CONFIG_CMD_ASKENV 105 #undef CONFIG_CMD_BOOTZ 106 #undef CONFIG_SUPPORT_RAW_INITRD 107 #undef CONFIG_FAT_WRITE 108 #undef CONFIG_CMD_EXT4 109 #undef CONFIG_CMD_FS_GENERIC 110 111 /* BOOTP/DHCP options */ 112 #define CONFIG_BOOTP_SUBNETMASK 113 #define CONFIG_BOOTP_GATEWAY 114 #define CONFIG_BOOTP_HOSTNAME 115 #define CONFIG_BOOTP_NISDOMAIN 116 #define CONFIG_BOOTP_BOOTPATH 117 #define CONFIG_BOOTP_BOOTFILESIZE 118 #define CONFIG_BOOTP_DNS 119 #define CONFIG_BOOTP_DNS2 120 #define CONFIG_BOOTP_SEND_HOSTNAME 121 #define CONFIG_BOOTP_NTPSERVER 122 #define CONFIG_BOOTP_TIMEOFFSET 123 #undef CONFIG_BOOTP_VENDOREX 124 125 /* Environment information */ 126 #define CONFIG_EXTRA_ENV_SETTINGS \ 127 "loadaddr=0x82000000\0" \ 128 "console=ttyO2,115200n8\0" \ 129 "mmcdev=0\0" \ 130 "vram=12M\0" \ 131 "dvimode=1024x768MR-16@60\0" \ 132 "defaultdisplay=dvi\0" \ 133 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ 134 "kernelopts=rw\0" \ 135 "commonargs=" \ 136 "setenv bootargs console=${console} " \ 137 "vram=${vram} " \ 138 "omapfb.mode=dvi:${dvimode} " \ 139 "omapdss.def_disp=${defaultdisplay}\0" \ 140 "mmcargs=" \ 141 "run commonargs; " \ 142 "setenv bootargs ${bootargs} " \ 143 "root=/dev/mmcblk0p2 " \ 144 "rootwait " \ 145 "${kernelopts}\0" \ 146 "nandargs=" \ 147 "run commonargs; " \ 148 "setenv bootargs ${bootargs} " \ 149 "omapfb.mode=dvi:${dvimode} " \ 150 "omapdss.def_disp=${defaultdisplay} " \ 151 "root=/dev/mtdblock4 " \ 152 "rootfstype=jffs2 " \ 153 "${kernelopts}\0" \ 154 "netargs=" \ 155 "run commonargs; " \ 156 "setenv bootargs ${bootargs} " \ 157 "root=/dev/nfs " \ 158 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 159 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ 160 "${kernelopts} " \ 161 "dnsip1=${dnsip} " \ 162 "dnsip2=${dnsip2}\0" \ 163 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 164 "bootscript=echo Running bootscript from mmc ...; " \ 165 "source ${loadaddr}\0" \ 166 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 167 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ 168 "mmcboot=echo Booting from mmc ...; " \ 169 "run mmcargs; " \ 170 "bootm ${loadaddr}\0" \ 171 "nandboot=echo Booting from nand ...; " \ 172 "run nandargs; " \ 173 "nand read ${loadaddr} 280000 400000; " \ 174 "bootm ${loadaddr}\0" \ 175 "netboot=echo Booting from network ...; " \ 176 "dhcp ${loadaddr}; " \ 177 "run netargs; " \ 178 "bootm ${loadaddr}\0" \ 179 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 180 "if run loadbootscript; then " \ 181 "run bootscript; " \ 182 "else " \ 183 "if run loaduimage; then " \ 184 "run mmcboot; " \ 185 "else run nandboot; " \ 186 "fi; " \ 187 "fi; " \ 188 "else run nandboot; fi\0" 189 190 191 #define CONFIG_BOOTCOMMAND "run autoboot" 192 193 /* Boot Argument Buffer Size */ 194 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) 195 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 196 0x01000000) /* 16MB */ 197 198 /* NAND and environment organization */ 199 #define CONFIG_ENV_IS_IN_NAND 1 200 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 201 202 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 203 204 /* SRAM config */ 205 #define CONFIG_SYS_SRAM_START 0x40200000 206 #define CONFIG_SYS_SRAM_SIZE 0x10000 207 208 /* Defines for SPL */ 209 #undef CONFIG_SPL_MTD_SUPPORT 210 211 #undef CONFIG_SPL_TEXT_BASE 212 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 213 214 /* NAND boot config */ 215 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 216 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 217 #define CONFIG_SYS_NAND_PAGE_COUNT 64 218 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 219 #define CONFIG_SYS_NAND_OOBSIZE 64 220 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 221 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 222 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 223 10, 11, 12, 13} 224 225 #define CONFIG_SYS_NAND_ECCSIZE 512 226 #define CONFIG_SYS_NAND_ECCBYTES 3 227 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 228 229 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 230 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 231 232 /* SPL OS boot options */ 233 #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ 234 #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ 235 0x400000) 236 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 237 238 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 239 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 240 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 241 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ 242 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ 243 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ 244 245 #undef CONFIG_SYS_SPL_ARGS_ADDR 246 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) 247 248 #endif /* __CONFIG_H */ 249