1 /*
2  * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_DB_MV7846MP_GP_H
8 #define _CONFIG_DB_MV7846MP_GP_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 #define CONFIG_DB_784MP_GP		/* Board target name for DDR training */
14 
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 
17 /*
18  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
19  * for DDR ECC byte filling in the SPL before loading the main
20  * U-Boot into it.
21  */
22 #define	CONFIG_SYS_TEXT_BASE	0x00800000
23 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
24 
25 /*
26  * Commands configuration
27  */
28 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
29 #define CONFIG_CMD_ENV
30 #define CONFIG_CMD_NAND
31 #define CONFIG_CMD_PCI
32 #define CONFIG_CMD_SATA
33 
34 /* I2C */
35 #define CONFIG_SYS_I2C
36 #define CONFIG_SYS_I2C_MVTWSI
37 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
38 #define CONFIG_SYS_I2C_SLAVE		0x0
39 #define CONFIG_SYS_I2C_SPEED		100000
40 
41 /* USB/EHCI configuration */
42 #define CONFIG_EHCI_IS_TDI
43 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
44 
45 /* SPI NOR flash default params, used by sf commands */
46 #define CONFIG_SF_DEFAULT_SPEED		1000000
47 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
48 
49 /* Environment in SPI NOR flash */
50 #define CONFIG_ENV_IS_IN_SPI_FLASH
51 #define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
52 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
53 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
54 
55 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
56 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
57 
58 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
59 #define CONFIG_SYS_ALT_MEMTEST
60 
61 /* SATA support */
62 #define CONFIG_SYS_SATA_MAX_DEVICE	2
63 #define CONFIG_SATA_MV
64 #define CONFIG_LIBATA
65 #define CONFIG_LBA48
66 #define CONFIG_EFI_PARTITION
67 #define CONFIG_DOS_PARTITION
68 
69 /* Additional FS support/configuration */
70 #define CONFIG_SUPPORT_VFAT
71 
72 /* PCIe support */
73 #ifndef CONFIG_SPL_BUILD
74 #define CONFIG_PCI
75 #define CONFIG_PCI_MVEBU
76 #define CONFIG_PCI_PNP
77 #define CONFIG_PCI_SCAN_SHOW
78 #endif
79 
80 /* NAND */
81 #define CONFIG_SYS_NAND_USE_FLASH_BBT
82 #define CONFIG_SYS_NAND_ONFI_DETECTION
83 
84 /*
85  * mv-common.h should be defined after CMD configs since it used them
86  * to enable certain macros
87  */
88 #include "mv-common.h"
89 
90 /*
91  * Memory layout while starting into the bin_hdr via the
92  * BootROM:
93  *
94  * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
95  * 0x4000.4030			bin_hdr start address
96  * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
97  * 0x4007.fffc			BootROM stack top
98  *
99  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
100  * L2 cache thus cannot be used.
101  */
102 
103 /* SPL */
104 /* Defines for SPL */
105 #define CONFIG_SPL_FRAMEWORK
106 #define CONFIG_SPL_TEXT_BASE		0x40004030
107 #define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
108 
109 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
110 #define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
111 
112 #ifdef CONFIG_SPL_BUILD
113 #define CONFIG_SYS_MALLOC_SIMPLE
114 #endif
115 
116 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
117 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
118 
119 /* SPL related SPI defines */
120 #define CONFIG_SPL_SPI_LOAD
121 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
122 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
123 
124 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
125 #define CONFIG_SPD_EEPROM		0x4e
126 #define CONFIG_BOARD_ECC_SUPPORT	/* this board supports ECC */
127 
128 #endif /* _CONFIG_DB_MV7846MP_GP_H */
129