1 /* 2 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_MV7846MP_GP_H 8 #define _CONFIG_DB_MV7846MP_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DB_784MP_GP /* Board target name for DDR training */ 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 21 22 /* I2C */ 23 #define CONFIG_SYS_I2C 24 #define CONFIG_SYS_I2C_MVTWSI 25 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 26 #define CONFIG_SYS_I2C_SLAVE 0x0 27 #define CONFIG_SYS_I2C_SPEED 100000 28 29 /* USB/EHCI configuration */ 30 #define CONFIG_EHCI_IS_TDI 31 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 32 33 /* SPI NOR flash default params, used by sf commands */ 34 #define CONFIG_SF_DEFAULT_SPEED 1000000 35 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 36 37 /* Environment in SPI NOR flash */ 38 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 39 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 40 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 41 42 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 43 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 44 45 /* SATA support */ 46 #define CONFIG_SYS_SATA_MAX_DEVICE 2 47 #define CONFIG_LBA48 48 49 /* PCIe support */ 50 #ifndef CONFIG_SPL_BUILD 51 #define CONFIG_PCI_MVEBU 52 #define CONFIG_PCI_SCAN_SHOW 53 #endif 54 55 /* NAND */ 56 #define CONFIG_SYS_NAND_USE_FLASH_BBT 57 #define CONFIG_SYS_NAND_ONFI_DETECTION 58 59 /* 60 * mv-common.h should be defined after CMD configs since it used them 61 * to enable certain macros 62 */ 63 #include "mv-common.h" 64 65 /* 66 * Memory layout while starting into the bin_hdr via the 67 * BootROM: 68 * 69 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 70 * 0x4000.4030 bin_hdr start address 71 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 72 * 0x4007.fffc BootROM stack top 73 * 74 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 75 * L2 cache thus cannot be used. 76 */ 77 78 /* SPL */ 79 /* Defines for SPL */ 80 #define CONFIG_SPL_TEXT_BASE 0x40004030 81 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 82 83 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 84 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 85 86 #ifdef CONFIG_SPL_BUILD 87 #define CONFIG_SYS_MALLOC_SIMPLE 88 #endif 89 90 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 91 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 92 93 /* SPL related SPI defines */ 94 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 95 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 96 97 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 98 #define CONFIG_SPD_EEPROM 0x4e 99 #define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ 100 101 #endif /* _CONFIG_DB_MV7846MP_GP_H */ 102