1 /*
2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_DB_88F6820_GP_H
8 #define _CONFIG_DB_88F6820_GP_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 
14 #define CONFIG_DISPLAY_BOARDINFO_LATE
15 
16 /*
17  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
18  * for DDR ECC byte filling in the SPL before loading the main
19  * U-Boot into it.
20  */
21 #define	CONFIG_SYS_TEXT_BASE	0x00800000
22 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
23 
24 /*
25  * Commands configuration
26  */
27 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
28 #define CONFIG_CMD_ENV
29 #define CONFIG_CMD_PCI
30 #define CONFIG_CMD_SCSI
31 
32 /* I2C */
33 #define CONFIG_SYS_I2C
34 #define CONFIG_SYS_I2C_MVTWSI
35 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
36 #define CONFIG_SYS_I2C_SLAVE		0x0
37 #define CONFIG_SYS_I2C_SPEED		100000
38 
39 /* SPI NOR flash default params, used by sf commands */
40 #define CONFIG_SF_DEFAULT_SPEED		1000000
41 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
42 
43 /*
44  * SDIO/MMC Card Configuration
45  */
46 #define CONFIG_MMC
47 #define CONFIG_MMC_SDMA
48 #define CONFIG_GENERIC_MMC
49 #define CONFIG_SDHCI
50 #define CONFIG_MV_SDHCI
51 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
52 
53 /*
54  * SATA/SCSI/AHCI configuration
55  */
56 #define CONFIG_LIBATA
57 #define CONFIG_SCSI_AHCI
58 #define CONFIG_SCSI_AHCI_PLAT
59 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
60 #define CONFIG_SYS_SCSI_MAX_LUN		1
61 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
62 					 CONFIG_SYS_SCSI_MAX_LUN)
63 
64 /* Partition support */
65 #define CONFIG_DOS_PARTITION
66 #define CONFIG_EFI_PARTITION
67 
68 /* Additional FS support/configuration */
69 #define CONFIG_SUPPORT_VFAT
70 
71 /* USB/EHCI configuration */
72 #define CONFIG_EHCI_IS_TDI
73 
74 /* Environment in SPI NOR flash */
75 #define CONFIG_ENV_IS_IN_SPI_FLASH
76 #define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
77 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
78 #define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
79 
80 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
81 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
82 
83 /* PCIe support */
84 #ifndef CONFIG_SPL_BUILD
85 #define CONFIG_PCI
86 #define CONFIG_PCI_MVEBU
87 #define CONFIG_PCI_PNP
88 #define CONFIG_PCI_SCAN_SHOW
89 #endif
90 
91 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
92 #define CONFIG_SYS_ALT_MEMTEST
93 
94 /* Keep device tree and initrd in lower memory so the kernel can access them */
95 #define CONFIG_EXTRA_ENV_SETTINGS	\
96 	"fdt_high=0x10000000\0"		\
97 	"initrd_high=0x10000000\0"
98 
99 /* SPL */
100 /*
101  * Select the boot device here
102  *
103  * Currently supported are:
104  * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
105  * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
106  */
107 #define SPL_BOOT_SPI_NOR_FLASH		1
108 #define SPL_BOOT_SDIO_MMC_CARD		2
109 #define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
110 
111 /* Defines for SPL */
112 #define CONFIG_SPL_FRAMEWORK
113 #define CONFIG_SPL_SIZE			(140 << 10)
114 #define CONFIG_SPL_TEXT_BASE		0x40000030
115 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
116 
117 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
118 #define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
119 
120 #ifdef CONFIG_SPL_BUILD
121 #define CONFIG_SYS_MALLOC_SIMPLE
122 #endif
123 
124 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
125 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
126 
127 #define CONFIG_SPL_LIBCOMMON_SUPPORT
128 #define CONFIG_SPL_LIBGENERIC_SUPPORT
129 #define CONFIG_SPL_SERIAL_SUPPORT
130 #define CONFIG_SPL_I2C_SUPPORT
131 
132 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
133 /* SPL related SPI defines */
134 #define CONFIG_SPL_SPI_SUPPORT
135 #define CONFIG_SPL_SPI_FLASH_SUPPORT
136 #define CONFIG_SPL_SPI_LOAD
137 #define CONFIG_SPL_SPI_BUS		0
138 #define CONFIG_SPL_SPI_CS		0
139 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
140 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
141 #endif
142 
143 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
144 /* SPL related MMC defines */
145 #define CONFIG_SPL_MMC_SUPPORT
146 #define CONFIG_SPL_LIBDISK_SUPPORT
147 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
148 #define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
149 #define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
150 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	(CONFIG_SYS_U_BOOT_OFFS / 512)
151 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	((512 << 10) / 512) /* 512KiB */
152 #ifdef CONFIG_SPL_BUILD
153 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
154 #endif
155 #endif
156 
157 /*
158  * mv-common.h should be defined after CMD configs since it used them
159  * to enable certain macros
160  */
161 #include "mv-common.h"
162 
163 #endif /* _CONFIG_DB_88F6820_GP_H */
164