1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_88F6820_GP_H 8 #define _CONFIG_DB_88F6820_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_ARMADA_XP /* SOC Family Name */ 14 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ 15 16 #define CONFIG_SYS_L2_PL310 17 18 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 19 #define CONFIG_SYS_GENERIC_BOARD 20 #define CONFIG_DISPLAY_BOARDINFO_LATE 21 22 #define CONFIG_SYS_TEXT_BASE 0x04000000 23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 29 #define CONFIG_CMD_CACHE 30 #define CONFIG_CMD_DHCP 31 #define CONFIG_CMD_ENV 32 #define CONFIG_CMD_I2C 33 #define CONFIG_CMD_PING 34 #define CONFIG_CMD_SF 35 #define CONFIG_CMD_SPI 36 #define CONFIG_CMD_TFTPPUT 37 #define CONFIG_CMD_TIME 38 39 /* I2C */ 40 #define CONFIG_SYS_I2C 41 #define CONFIG_SYS_I2C_MVTWSI 42 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 43 #define CONFIG_SYS_I2C_SLAVE 0x0 44 #define CONFIG_SYS_I2C_SPEED 100000 45 46 /* SPI NOR flash default params, used by sf commands */ 47 #define CONFIG_SF_DEFAULT_SPEED 1000000 48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 49 #define CONFIG_SPI_FLASH_STMICRO 50 51 /* Environment in SPI NOR flash */ 52 #define CONFIG_ENV_IS_IN_SPI_FLASH 53 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 54 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 55 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 56 57 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 58 #define CONFIG_PHY_ADDR { 1, 0 } 59 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII 60 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 61 62 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 63 #define CONFIG_SYS_ALT_MEMTEST 64 65 /* Keep device tree and initrd in lower memory so the kernel can access them */ 66 #define CONFIG_EXTRA_ENV_SETTINGS \ 67 "fdt_high=0x10000000\0" \ 68 "initrd_high=0x10000000\0" 69 70 /* 71 * mv-common.h should be defined after CMD configs since it used them 72 * to enable certain macros 73 */ 74 #include "mv-common.h" 75 76 #endif /* _CONFIG_DB_88F6820_GP_H */ 77