1 /*
2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_DB_88F6820_GP_H
8 #define _CONFIG_DB_88F6820_GP_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 #define CONFIG_ARMADA_XP		/* SOC Family Name */
14 #define CONFIG_DB_88F6820_GP		/* Board target name for DDR training */
15 
16 #define CONFIG_SYS_L2_PL310
17 
18 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
19 #define CONFIG_SYS_GENERIC_BOARD
20 #define CONFIG_DISPLAY_BOARDINFO_LATE
21 
22 #define	CONFIG_SYS_TEXT_BASE	0x04000000
23 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
24 
25 /*
26  * Commands configuration
27  */
28 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
29 #include <config_cmd_default.h>
30 #define CONFIG_CMD_CACHE
31 #define CONFIG_CMD_DHCP
32 #define CONFIG_CMD_ENV
33 #define CONFIG_CMD_I2C
34 #define CONFIG_CMD_PING
35 #define CONFIG_CMD_SF
36 #define CONFIG_CMD_SPI
37 #define CONFIG_CMD_TFTPPUT
38 #define CONFIG_CMD_TIME
39 
40 /* I2C */
41 #define CONFIG_SYS_I2C
42 #define CONFIG_SYS_I2C_MVTWSI
43 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
44 #define CONFIG_SYS_I2C_SLAVE		0x0
45 #define CONFIG_SYS_I2C_SPEED		100000
46 
47 /* SPI NOR flash default params, used by sf commands */
48 #define CONFIG_SF_DEFAULT_SPEED		1000000
49 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
50 #define CONFIG_SPI_FLASH_STMICRO
51 
52 /* Environment in SPI NOR flash */
53 #define CONFIG_ENV_IS_IN_SPI_FLASH
54 #define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
55 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
56 #define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
57 
58 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
59 #define CONFIG_PHY_ADDR			{ 1, 0 }
60 #define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII
61 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
62 
63 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
64 #define CONFIG_SYS_ALT_MEMTEST
65 
66 /*
67  * mv-common.h should be defined after CMD configs since it used them
68  * to enable certain macros
69  */
70 #include "mv-common.h"
71 
72 #endif /* _CONFIG_DB_88F6820_GP_H */
73