1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_88F6820_GP_H 8 #define _CONFIG_DB_88F6820_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_ARMADA_XP /* SOC Family Name */ 14 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ 15 16 #define CONFIG_SYS_L2_PL310 17 18 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 19 #define CONFIG_SYS_GENERIC_BOARD 20 #define CONFIG_DISPLAY_BOARDINFO_LATE 21 22 #define CONFIG_SYS_TEXT_BASE 0x04000000 23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 29 #define CONFIG_CMD_CACHE 30 #define CONFIG_CMD_DHCP 31 #define CONFIG_CMD_ENV 32 #define CONFIG_CMD_EXT2 33 #define CONFIG_CMD_EXT4 34 #define CONFIG_CMD_FAT 35 #define CONFIG_CMD_FS_GENERIC 36 #define CONFIG_CMD_I2C 37 #define CONFIG_CMD_MMC 38 #define CONFIG_CMD_PING 39 #define CONFIG_CMD_SCSI 40 #define CONFIG_CMD_SF 41 #define CONFIG_CMD_SPI 42 #define CONFIG_CMD_TFTPPUT 43 #define CONFIG_CMD_TIME 44 #define CONFIG_CMD_USB 45 46 /* I2C */ 47 #define CONFIG_SYS_I2C 48 #define CONFIG_SYS_I2C_MVTWSI 49 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 50 #define CONFIG_SYS_I2C_SLAVE 0x0 51 #define CONFIG_SYS_I2C_SPEED 100000 52 53 /* SPI NOR flash default params, used by sf commands */ 54 #define CONFIG_SF_DEFAULT_SPEED 1000000 55 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 56 #define CONFIG_SPI_FLASH_STMICRO 57 58 /* 59 * SDIO/MMC Card Configuration 60 */ 61 #define CONFIG_MMC 62 #define CONFIG_MMC_SDMA 63 #define CONFIG_GENERIC_MMC 64 #define CONFIG_SDHCI 65 #define CONFIG_MV_SDHCI 66 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE 67 68 /* 69 * SATA/SCSI/AHCI configuration 70 */ 71 #define CONFIG_LIBATA 72 #define CONFIG_SCSI_AHCI 73 #define CONFIG_SCSI_AHCI_PLAT 74 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 75 #define CONFIG_SYS_SCSI_MAX_LUN 1 76 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 77 CONFIG_SYS_SCSI_MAX_LUN) 78 79 /* Partition support */ 80 #define CONFIG_DOS_PARTITION 81 #define CONFIG_EFI_PARTITION 82 83 /* Additional FS support/configuration */ 84 #define CONFIG_SUPPORT_VFAT 85 86 /* USB/EHCI configuration */ 87 #define CONFIG_USB_EHCI 88 #define CONFIG_USB_STORAGE 89 #define CONFIG_USB_EHCI_MARVELL 90 #define CONFIG_EHCI_IS_TDI 91 92 /* Environment in SPI NOR flash */ 93 #define CONFIG_ENV_IS_IN_SPI_FLASH 94 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 95 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 96 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 97 98 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 99 #define CONFIG_PHY_ADDR { 1, 0 } 100 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII 101 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 102 103 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 104 #define CONFIG_SYS_ALT_MEMTEST 105 106 /* Keep device tree and initrd in lower memory so the kernel can access them */ 107 #define CONFIG_EXTRA_ENV_SETTINGS \ 108 "fdt_high=0x10000000\0" \ 109 "initrd_high=0x10000000\0" 110 111 /* 112 * mv-common.h should be defined after CMD configs since it used them 113 * to enable certain macros 114 */ 115 #include "mv-common.h" 116 117 #endif /* _CONFIG_DB_88F6820_GP_H */ 118