xref: /openbmc/u-boot/include/configs/da850evm.h (revision 0cb77bfa)
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21  */
22 
23 #ifndef __CONFIG_H
24 #define __CONFIG_H
25 
26 /*
27  * Board
28  */
29 #define CONFIG_DRIVER_TI_EMAC
30 #define CONFIG_USE_SPIFLASH
31 
32 /*
33  * SoC Configuration
34  */
35 #define CONFIG_MACH_DAVINCI_DA850_EVM
36 #define CONFIG_ARM926EJS		/* arm926ejs CPU core */
37 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
38 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
39 #define CONFIG_SYS_OSCIN_FREQ		24000000
40 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
41 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
42 #define CONFIG_SYS_HZ			1000
43 #define CONFIG_SKIP_LOWLEVEL_INIT
44 #define CONFIG_SYS_TEXT_BASE		0xc1080000
45 
46 /*
47  * Memory Info
48  */
49 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
50 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
51 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
52 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
53 
54 /* memtest start addr */
55 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
56 
57 /* memtest will be run on 16MB */
58 #define CONFIG_SYS_MEMTEST_END 	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
59 
60 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
61 #define CONFIG_STACKSIZE	(256*1024) /* regular stack */
62 
63 /*
64  * Serial Driver info
65  */
66 #define CONFIG_SYS_NS16550
67 #define CONFIG_SYS_NS16550_SERIAL
68 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
69 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
70 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
71 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
72 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
73 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
74 
75 #define CONFIG_SPI
76 #define CONFIG_SPI_FLASH
77 #define CONFIG_SPI_FLASH_STMICRO
78 #define CONFIG_DAVINCI_SPI
79 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
80 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
81 #define CONFIG_SF_DEFAULT_SPEED		30000000
82 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
83 
84 /*
85  * I2C Configuration
86  */
87 #define CONFIG_HARD_I2C
88 #define CONFIG_DRIVER_DAVINCI_I2C
89 #define CONFIG_SYS_I2C_SPEED		25000
90 #define CONFIG_SYS_I2C_SLAVE		10 /* Bogus, master-only in U-Boot */
91 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
92 
93 /*
94  * Flash & Environment
95  */
96 #ifdef CONFIG_USE_NAND
97 #undef CONFIG_ENV_IS_IN_FLASH
98 #define CONFIG_NAND_DAVINCI
99 #define CONFIG_SYS_NO_FLASH
100 #define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
101 #define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
102 #define CONFIG_ENV_SIZE			(128 << 10)
103 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
104 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
105 #define	CONFIG_SYS_NAND_PAGE_2K
106 #define CONFIG_SYS_NAND_CS		3
107 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
108 #define CONFIG_SYS_CLE_MASK		0x10
109 #define CONFIG_SYS_ALE_MASK		0x8
110 #undef CONFIG_SYS_NAND_HW_ECC
111 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
112 #define NAND_MAX_CHIPS			1
113 #endif
114 
115 /*
116  * Network & Ethernet Configuration
117  */
118 #ifdef CONFIG_DRIVER_TI_EMAC
119 #define CONFIG_EMAC_MDIO_PHY_NUM	0
120 #define CONFIG_MII
121 #define CONFIG_BOOTP_DEFAULT
122 #define CONFIG_BOOTP_DNS
123 #define CONFIG_BOOTP_DNS2
124 #define CONFIG_BOOTP_SEND_HOSTNAME
125 #define CONFIG_NET_RETRY_COUNT	10
126 #define CONFIG_NET_MULTI
127 #endif
128 
129 #ifdef CONFIG_USE_SPIFLASH
130 #undef CONFIG_ENV_IS_IN_FLASH
131 #undef CONFIG_ENV_IS_IN_NAND
132 #define CONFIG_ENV_IS_IN_SPI_FLASH
133 #define CONFIG_ENV_SIZE			(64 << 10)
134 #define CONFIG_ENV_OFFSET		(256 << 10)
135 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
136 #define CONFIG_SYS_NO_FLASH
137 #endif
138 
139 /*
140  * U-Boot general configuration
141  */
142 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
143 #define CONFIG_SYS_PROMPT	"DA850-evm > " /* Command Prompt */
144 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
145 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
146 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
147 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
148 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
149 #define CONFIG_VERSION_VARIABLE
150 #define CONFIG_AUTO_COMPLETE
151 #define CONFIG_SYS_HUSH_PARSER
152 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
153 #define CONFIG_CMDLINE_EDITING
154 #define CONFIG_SYS_LONGHELP
155 #define CONFIG_CRC32_VERIFY
156 #define CONFIG_MX_CYCLIC
157 
158 /*
159  * Linux Information
160  */
161 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
162 #define CONFIG_CMDLINE_TAG
163 #define CONFIG_REVISION_TAG
164 #define CONFIG_SETUP_MEMORY_TAGS
165 #define CONFIG_BOOTARGS		\
166 	"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
167 #define CONFIG_BOOTDELAY	3
168 
169 /*
170  * U-Boot commands
171  */
172 #include <config_cmd_default.h>
173 #define CONFIG_CMD_ENV
174 #define CONFIG_CMD_ASKENV
175 #define CONFIG_CMD_DHCP
176 #define CONFIG_CMD_DIAG
177 #define CONFIG_CMD_MII
178 #define CONFIG_CMD_PING
179 #define CONFIG_CMD_SAVES
180 #define CONFIG_CMD_MEMORY
181 
182 #ifndef CONFIG_DRIVER_TI_EMAC
183 #undef CONFIG_CMD_NET
184 #undef CONFIG_CMD_DHCP
185 #undef CONFIG_CMD_MII
186 #undef CONFIG_CMD_PING
187 #endif
188 
189 #ifdef CONFIG_USE_NAND
190 #undef CONFIG_CMD_FLASH
191 #undef CONFIG_CMD_IMLS
192 #define CONFIG_CMD_NAND
193 
194 #define CONFIG_CMD_MTDPARTS
195 #define CONFIG_MTD_DEVICE
196 #define CONFIG_MTD_PARTITIONS
197 #define CONFIG_LZO
198 #define CONFIG_RBTREE
199 #define CONFIG_CMD_UBI
200 #define CONFIG_CMD_UBIFS
201 #endif
202 
203 #ifdef CONFIG_USE_SPIFLASH
204 #undef CONFIG_CMD_IMLS
205 #undef CONFIG_CMD_FLASH
206 #define CONFIG_CMD_SPI
207 #define CONFIG_CMD_SF
208 #define CONFIG_CMD_SAVEENV
209 #endif
210 
211 #if !defined(CONFIG_USE_NAND) && \
212 	!defined(CONFIG_USE_NOR) && \
213 	!defined(CONFIG_USE_SPIFLASH)
214 #define CONFIG_ENV_IS_NOWHERE
215 #define CONFIG_SYS_NO_FLASH
216 #define CONFIG_ENV_SIZE		(16 << 10)
217 #undef CONFIG_CMD_IMLS
218 #undef CONFIG_CMD_ENV
219 #endif
220 
221 /* additions for new relocation code, must added to all boards */
222 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
223 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
224 					GENERATED_GBL_DATA_SIZE)
225 #endif /* __CONFIG_H */
226