1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Based on corenet_ds.h 4 */ 5 6 #ifndef __CONFIG_H 7 #define __CONFIG_H 8 9 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040) 10 #error Must call Cyrus CONFIG with a specific CPU enabled. 11 #endif 12 13 #define CONFIG_SDCARD 14 #define CONFIG_FSL_SATA_V2 15 #define CONFIG_PCIE3 16 #define CONFIG_PCIE4 17 #ifdef CONFIG_ARCH_P5020 18 #define CONFIG_SYS_FSL_RAID_ENGINE 19 #define CONFIG_SYS_DPAA_RMAN 20 #endif 21 #define CONFIG_SYS_DPAA_PME 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 27 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 28 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg 29 #if defined(CONFIG_ARCH_P5020) 30 #define CONFIG_SYS_CLK_FREQ 133000000 31 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg 32 #elif defined(CONFIG_ARCH_P5040) 33 #define CONFIG_SYS_CLK_FREQ 100000000 34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 40 #define CONFIG_SYS_MMC_MAX_DEVICE 1 41 42 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 43 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 44 #define CONFIG_PCIE1 /* PCIE controller 1 */ 45 #define CONFIG_PCIE2 /* PCIE controller 2 */ 46 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 47 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 48 49 #define CONFIG_ENV_OVERWRITE 50 51 #if defined(CONFIG_SDCARD) 52 #define CONFIG_SYS_EXTRA_ENV_RELOC 53 #define CONFIG_FSL_FIXED_MMC_LOCATION 54 #define CONFIG_SYS_MMC_ENV_DEV 0 55 #define CONFIG_ENV_SIZE 0x2000 56 #define CONFIG_ENV_OFFSET (512 * 1658) 57 #endif 58 59 /* 60 * These can be toggled for performance analysis, otherwise use default. 61 */ 62 #define CONFIG_SYS_CACHE_STASHING 63 #define CONFIG_BACKSIDE_L2_CACHE 64 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 65 #define CONFIG_BTB /* toggle branch predition */ 66 #define CONFIG_DDR_ECC 67 #ifdef CONFIG_DDR_ECC 68 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 69 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 70 #endif 71 72 #define CONFIG_ENABLE_36BIT_PHYS 73 74 #ifdef CONFIG_PHYS_64BIT 75 #define CONFIG_ADDR_MAP 76 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 77 #endif 78 79 /* test POST memory test */ 80 #undef CONFIG_POST 81 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 82 #define CONFIG_SYS_MEMTEST_END 0x00400000 83 84 /* 85 * Config the L3 Cache as L3 SRAM 86 */ 87 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 88 #ifdef CONFIG_PHYS_64BIT 89 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 90 #else 91 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 92 #endif 93 #define CONFIG_SYS_L3_SIZE (1024 << 10) 94 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 95 96 #ifdef CONFIG_PHYS_64BIT 97 #define CONFIG_SYS_DCSRBAR 0xf0000000 98 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 99 #endif 100 101 /* 102 * DDR Setup 103 */ 104 #define CONFIG_VERY_BIG_RAM 105 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 106 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 107 108 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 109 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 110 111 #define CONFIG_DDR_SPD 112 113 #define CONFIG_SYS_SPD_BUS_NUM 1 114 #define SPD_EEPROM_ADDRESS1 0x51 115 #define SPD_EEPROM_ADDRESS2 0x52 116 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 117 118 /* 119 * Local Bus Definitions 120 */ 121 122 #define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ 123 #ifdef CONFIG_PHYS_64BIT 124 #define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull 125 #else 126 #define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE 127 #endif 128 129 #define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ 130 #ifdef CONFIG_PHYS_64BIT 131 #define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull 132 #else 133 #define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE 134 #endif 135 136 /* Set the local bus clock 1/16 of platform clock */ 137 #define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) 138 139 #define CONFIG_SYS_BR0_PRELIM \ 140 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) 141 #define CONFIG_SYS_BR1_PRELIM \ 142 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) 143 144 #define CONFIG_SYS_OR0_PRELIM 0xfff00010 145 #define CONFIG_SYS_OR1_PRELIM 0xfff00010 146 147 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 148 149 #if defined(CONFIG_RAMBOOT_PBL) 150 #define CONFIG_SYS_RAMBOOT 151 #endif 152 153 #define CONFIG_MISC_INIT_R 154 155 #define CONFIG_HWCONFIG 156 157 /* define to use L1 as initial stack */ 158 #define CONFIG_L1_INIT_RAM 159 #define CONFIG_SYS_INIT_RAM_LOCK 160 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 161 #ifdef CONFIG_PHYS_64BIT 162 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 163 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 164 /* The assembler doesn't like typecast */ 165 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 166 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 167 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 168 #else 169 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 170 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 171 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 172 #endif 173 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 174 175 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 176 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 177 178 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 179 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 180 181 /* Serial Port - controlled on board with jumper J8 182 * open - index 2 183 * shorted - index 1 184 */ 185 #define CONFIG_SYS_NS16550_SERIAL 186 #define CONFIG_SYS_NS16550_REG_SIZE 1 187 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 188 189 #define CONFIG_SYS_BAUDRATE_TABLE \ 190 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 191 192 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 193 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 194 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 195 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 196 197 /* I2C */ 198 #define CONFIG_SYS_I2C 199 #define CONFIG_SYS_I2C_FSL 200 #define CONFIG_I2C_MULTI_BUS 201 #define CONFIG_I2C_CMD_TREE 202 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ 203 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 204 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 205 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ 206 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 207 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 208 #define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ 209 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 210 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 211 #define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ 212 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 213 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 214 215 #define CONFIG_ID_EEPROM 216 #define CONFIG_SYS_I2C_EEPROM_NXID 217 #define CONFIG_SYS_EEPROM_BUS_NUM 0 218 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 219 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 220 221 #define CONFIG_SYS_I2C_GENERIC_MAC 222 #define CONFIG_SYS_I2C_MAC1_BUS 3 223 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 224 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 225 #define CONFIG_SYS_I2C_MAC2_BUS 0 226 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 227 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa 228 229 #define CONFIG_RTC_MCP79411 1 230 #define CONFIG_SYS_RTC_BUS_NUM 3 231 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f 232 233 /* 234 * eSPI - Enhanced SPI 235 */ 236 237 /* 238 * General PCI 239 * Memory space is mapped 1-1, but I/O space must start from 0. 240 */ 241 242 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 243 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 244 #ifdef CONFIG_PHYS_64BIT 245 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 246 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 247 #else 248 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 249 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 250 #endif 251 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 252 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 253 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 254 #ifdef CONFIG_PHYS_64BIT 255 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 256 #else 257 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 258 #endif 259 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 260 261 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 262 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 263 #ifdef CONFIG_PHYS_64BIT 264 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 265 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 266 #else 267 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 268 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 269 #endif 270 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 271 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 272 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 273 #ifdef CONFIG_PHYS_64BIT 274 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 275 #else 276 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 277 #endif 278 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 279 280 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 281 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 282 #ifdef CONFIG_PHYS_64BIT 283 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 284 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 285 #else 286 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 287 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 288 #endif 289 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 290 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 291 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 292 #ifdef CONFIG_PHYS_64BIT 293 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 294 #else 295 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 296 #endif 297 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 298 299 /* controller 4, Base address 203000 */ 300 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 301 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 302 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 303 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 304 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 305 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 306 307 /* Qman/Bman */ 308 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 309 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 310 #ifdef CONFIG_PHYS_64BIT 311 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 312 #else 313 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 314 #endif 315 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 316 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 317 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 318 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 319 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 320 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 321 CONFIG_SYS_BMAN_CENA_SIZE) 322 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 323 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 324 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 325 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 326 #ifdef CONFIG_PHYS_64BIT 327 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 328 #else 329 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 330 #endif 331 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 332 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 333 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 334 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 335 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 336 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 337 CONFIG_SYS_QMAN_CENA_SIZE) 338 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 339 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 340 341 #define CONFIG_SYS_DPAA_FMAN 342 /* Default address of microcode for the Linux Fman driver */ 343 /* 344 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 345 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 346 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 347 */ 348 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 349 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 350 351 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 352 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 353 354 #ifdef CONFIG_SYS_DPAA_FMAN 355 #define CONFIG_FMAN_ENET 356 #endif 357 358 #ifdef CONFIG_PCI 359 #define CONFIG_PCI_INDIRECT_BRIDGE 360 361 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 362 #endif /* CONFIG_PCI */ 363 364 /* SATA */ 365 #ifdef CONFIG_FSL_SATA_V2 366 #define CONFIG_SYS_SATA_MAX_DEVICE 2 367 #define CONFIG_SATA1 368 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 369 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 370 #define CONFIG_SATA2 371 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 372 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 373 374 #define CONFIG_LBA48 375 #endif 376 377 #ifdef CONFIG_FMAN_ENET 378 #define CONFIG_SYS_TBIPA_VALUE 8 379 #define CONFIG_ETHPRIME "FM1@DTSEC4" 380 #endif 381 382 /* 383 * Environment 384 */ 385 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 386 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 387 388 /* 389 * USB 390 */ 391 #define CONFIG_HAS_FSL_DR_USB 392 #define CONFIG_HAS_FSL_MPH_USB 393 394 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 395 #define CONFIG_USB_EHCI_FSL 396 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 397 #define CONFIG_EHCI_IS_TDI 398 /* _VIA_CONTROL_EP */ 399 #endif 400 401 #ifdef CONFIG_MMC 402 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 403 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 404 #endif 405 406 /* 407 * Miscellaneous configurable options 408 */ 409 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 410 411 /* 412 * For booting Linux, the board info and command line data 413 * have to be in the first 64 MB of memory, since this is 414 * the maximum mapped by the Linux kernel during initialization. 415 */ 416 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 417 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 418 419 #ifdef CONFIG_CMD_KGDB 420 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 421 #endif 422 423 /* 424 * Environment Configuration 425 */ 426 #define CONFIG_ROOTPATH "/opt/nfsroot" 427 #define CONFIG_BOOTFILE "uImage" 428 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 429 430 /* default location for tftp and bootm */ 431 #define CONFIG_LOADADDR 1000000 432 433 #define __USB_PHY_TYPE utmi 434 435 #define CONFIG_EXTRA_ENV_SETTINGS \ 436 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 437 "bank_intlv=cs0_cs1;" \ 438 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 439 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 440 "netdev=eth0\0" \ 441 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 442 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 443 "consoledev=ttyS0\0" \ 444 "ramdiskaddr=2000000\0" \ 445 "fdtaddr=1e00000\0" \ 446 "bdev=sda3\0" 447 448 #define CONFIG_HDBOOT \ 449 "setenv bootargs root=/dev/$bdev rw " \ 450 "console=$consoledev,$baudrate $othbootargs;" \ 451 "tftp $loadaddr $bootfile;" \ 452 "tftp $fdtaddr $fdtfile;" \ 453 "bootm $loadaddr - $fdtaddr" 454 455 #define CONFIG_NFSBOOTCOMMAND \ 456 "setenv bootargs root=/dev/nfs rw " \ 457 "nfsroot=$serverip:$rootpath " \ 458 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 459 "console=$consoledev,$baudrate $othbootargs;" \ 460 "tftp $loadaddr $bootfile;" \ 461 "tftp $fdtaddr $fdtfile;" \ 462 "bootm $loadaddr - $fdtaddr" 463 464 #define CONFIG_RAMBOOTCOMMAND \ 465 "setenv bootargs root=/dev/ram rw " \ 466 "console=$consoledev,$baudrate $othbootargs;" \ 467 "tftp $ramdiskaddr $ramdiskfile;" \ 468 "tftp $loadaddr $bootfile;" \ 469 "tftp $fdtaddr $fdtfile;" \ 470 "bootm $loadaddr $ramdiskaddr $fdtaddr" 471 472 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 473 474 #include <asm/fsl_secure_boot.h> 475 476 #endif /* __CONFIG_H */ 477