1 /* 2 * Based on corenet_ds.h 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_DISPLAY_BOARDINFO 11 12 #define CONFIG_CYRUS 13 14 #define CONFIG_PHYS_64BIT 15 16 #if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) 17 #error Must call Cyrus CONFIG with a specific CPU enabled. 18 #endif 19 20 21 #define CONFIG_MMC 22 #define CONFIG_SDCARD 23 #define CONFIG_FSL_SATA_V2 24 #define CONFIG_PCIE3 25 #define CONFIG_PCIE4 26 #ifdef CONFIG_PPC_P5020 27 #define CONFIG_SYS_FSL_RAID_ENGINE 28 #define CONFIG_SYS_DPAA_RMAN 29 #endif 30 #define CONFIG_SYS_DPAA_PME 31 32 /* 33 * Corenet DS style board configuration file 34 */ 35 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 36 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 37 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg 38 #if defined(CONFIG_PPC_P5020) 39 #define CONFIG_SYS_CLK_FREQ 133000000 40 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg 41 #elif defined(CONFIG_PPC_P5040) 42 #define CONFIG_SYS_CLK_FREQ 100000000 43 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg 44 #endif 45 46 47 /* High Level Configuration Options */ 48 #define CONFIG_BOOKE 49 #define CONFIG_E500 /* BOOKE e500 family */ 50 #define CONFIG_E500MC /* BOOKE e500mc family */ 51 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 52 #define CONFIG_MP /* support multiple processors */ 53 54 55 #define CONFIG_SYS_MMC_MAX_DEVICE 1 56 57 #ifndef CONFIG_SYS_TEXT_BASE 58 #define CONFIG_SYS_TEXT_BASE 0xeff40000 59 #endif 60 61 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 62 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 63 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 64 #define CONFIG_PCI /* Enable PCI/PCIE */ 65 #define CONFIG_PCIE1 /* PCIE controler 1 */ 66 #define CONFIG_PCIE2 /* PCIE controler 2 */ 67 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 68 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 69 70 #define CONFIG_FSL_LAW /* Use common FSL init code */ 71 72 #define CONFIG_ENV_OVERWRITE 73 74 #define CONFIG_SYS_NO_FLASH 75 76 #if defined(CONFIG_SDCARD) 77 #define CONFIG_SYS_EXTRA_ENV_RELOC 78 #define CONFIG_ENV_IS_IN_MMC 79 #define CONFIG_FSL_FIXED_MMC_LOCATION 80 #define CONFIG_SYS_MMC_ENV_DEV 0 81 #define CONFIG_ENV_SIZE 0x2000 82 #define CONFIG_ENV_OFFSET (512 * 1658) 83 #endif 84 85 /* 86 * These can be toggled for performance analysis, otherwise use default. 87 */ 88 #define CONFIG_SYS_CACHE_STASHING 89 #define CONFIG_BACKSIDE_L2_CACHE 90 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 91 #define CONFIG_BTB /* toggle branch predition */ 92 #define CONFIG_DDR_ECC 93 #ifdef CONFIG_DDR_ECC 94 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 95 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 96 #endif 97 98 #define CONFIG_ENABLE_36BIT_PHYS 99 100 #ifdef CONFIG_PHYS_64BIT 101 #define CONFIG_ADDR_MAP 102 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 103 #endif 104 105 /* test POST memory test */ 106 #undef CONFIG_POST 107 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 108 #define CONFIG_SYS_MEMTEST_END 0x00400000 109 #define CONFIG_SYS_ALT_MEMTEST 110 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 111 112 /* 113 * Config the L3 Cache as L3 SRAM 114 */ 115 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 116 #ifdef CONFIG_PHYS_64BIT 117 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 118 #else 119 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 120 #endif 121 #define CONFIG_SYS_L3_SIZE (1024 << 10) 122 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 123 124 #ifdef CONFIG_PHYS_64BIT 125 #define CONFIG_SYS_DCSRBAR 0xf0000000 126 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 127 #endif 128 129 /* 130 * DDR Setup 131 */ 132 #define CONFIG_VERY_BIG_RAM 133 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 134 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 135 136 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 137 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 138 139 #define CONFIG_DDR_SPD 140 #define CONFIG_SYS_FSL_DDR3 141 142 #define CONFIG_SYS_SPD_BUS_NUM 1 143 #define SPD_EEPROM_ADDRESS1 0x51 144 #define SPD_EEPROM_ADDRESS2 0x52 145 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 146 147 /* 148 * Local Bus Definitions 149 */ 150 151 #define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ 152 #ifdef CONFIG_PHYS_64BIT 153 #define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull 154 #else 155 #define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE 156 #endif 157 158 #define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ 159 #ifdef CONFIG_PHYS_64BIT 160 #define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull 161 #else 162 #define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE 163 #endif 164 165 /* Set the local bus clock 1/16 of platform clock */ 166 #define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) 167 168 #define CONFIG_SYS_BR0_PRELIM \ 169 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) 170 #define CONFIG_SYS_BR1_PRELIM \ 171 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) 172 173 #define CONFIG_SYS_OR0_PRELIM 0xfff00010 174 #define CONFIG_SYS_OR1_PRELIM 0xfff00010 175 176 177 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 178 179 #if defined(CONFIG_RAMBOOT_PBL) 180 #define CONFIG_SYS_RAMBOOT 181 #endif 182 183 #define CONFIG_BOARD_EARLY_INIT_F 184 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 185 #define CONFIG_MISC_INIT_R 186 187 #define CONFIG_HWCONFIG 188 189 /* define to use L1 as initial stack */ 190 #define CONFIG_L1_INIT_RAM 191 #define CONFIG_SYS_INIT_RAM_LOCK 192 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 193 #ifdef CONFIG_PHYS_64BIT 194 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 195 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 196 /* The assembler doesn't like typecast */ 197 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 198 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 199 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 200 #else 201 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 202 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 203 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 204 #endif 205 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 206 207 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 208 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 209 210 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 211 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 212 213 /* Serial Port - controlled on board with jumper J8 214 * open - index 2 215 * shorted - index 1 216 */ 217 #define CONFIG_CONS_INDEX 1 218 #define CONFIG_SYS_NS16550_SERIAL 219 #define CONFIG_SYS_NS16550_REG_SIZE 1 220 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 221 222 #define CONFIG_SYS_BAUDRATE_TABLE \ 223 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 224 225 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 226 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 227 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 228 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 229 230 /* Use the HUSH parser */ 231 #define CONFIG_SYS_HUSH_PARSER 232 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 233 234 /* pass open firmware flat tree */ 235 #define CONFIG_OF_LIBFDT 236 #define CONFIG_OF_BOARD_SETUP 237 238 /* new uImage format support */ 239 #define CONFIG_FIT 240 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 241 242 /* I2C */ 243 #define CONFIG_SYS_I2C 244 #define CONFIG_SYS_I2C_FSL 245 #define CONFIG_I2C_MULTI_BUS 246 #define CONFIG_I2C_CMD_TREE 247 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ 248 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 249 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 250 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ 251 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 252 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 253 #define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ 254 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 255 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 256 #define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ 257 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 258 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 259 260 #define CONFIG_ID_EEPROM 261 #define CONFIG_SYS_I2C_EEPROM_NXID 262 #define CONFIG_SYS_EEPROM_BUS_NUM 0 263 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 264 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 265 266 #define CONFIG_SYS_I2C_GENERIC_MAC 267 #define CONFIG_SYS_I2C_MAC1_BUS 3 268 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 269 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 270 #define CONFIG_SYS_I2C_MAC2_BUS 0 271 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 272 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa 273 274 #define CONFIG_CMD_DATE 1 275 #define CONFIG_RTC_MCP79411 1 276 #define CONFIG_SYS_RTC_BUS_NUM 3 277 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f 278 279 /* 280 * eSPI - Enhanced SPI 281 */ 282 283 /* 284 * General PCI 285 * Memory space is mapped 1-1, but I/O space must start from 0. 286 */ 287 288 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 289 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 290 #ifdef CONFIG_PHYS_64BIT 291 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 292 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 293 #else 294 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 295 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 296 #endif 297 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 298 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 299 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 300 #ifdef CONFIG_PHYS_64BIT 301 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 302 #else 303 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 304 #endif 305 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 306 307 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 308 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 309 #ifdef CONFIG_PHYS_64BIT 310 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 311 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 312 #else 313 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 314 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 315 #endif 316 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 317 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 318 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 319 #ifdef CONFIG_PHYS_64BIT 320 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 321 #else 322 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 323 #endif 324 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 325 326 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 327 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 328 #ifdef CONFIG_PHYS_64BIT 329 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 330 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 331 #else 332 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 333 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 334 #endif 335 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 336 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 337 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 338 #ifdef CONFIG_PHYS_64BIT 339 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 340 #else 341 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 342 #endif 343 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 344 345 /* controller 4, Base address 203000 */ 346 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 347 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 348 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 349 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 350 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 351 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 352 353 /* Qman/Bman */ 354 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 355 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 356 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 357 #ifdef CONFIG_PHYS_64BIT 358 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 359 #else 360 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 361 #endif 362 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 363 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 364 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 365 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 366 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 367 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 368 CONFIG_SYS_BMAN_CENA_SIZE) 369 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 370 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 371 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 372 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 373 #ifdef CONFIG_PHYS_64BIT 374 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 375 #else 376 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 377 #endif 378 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 379 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 380 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 381 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 382 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 383 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 384 CONFIG_SYS_QMAN_CENA_SIZE) 385 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 386 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 387 388 #define CONFIG_SYS_DPAA_FMAN 389 /* Default address of microcode for the Linux Fman driver */ 390 /* 391 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 392 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 393 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 394 */ 395 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 396 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 397 398 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 399 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 400 401 #ifdef CONFIG_SYS_DPAA_FMAN 402 #define CONFIG_FMAN_ENET 403 #define CONFIG_PHY_MICREL 404 #define CONFIG_PHY_MICREL_KSZ9021 405 #endif 406 407 #ifdef CONFIG_PCI 408 #define CONFIG_PCI_INDIRECT_BRIDGE 409 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 410 #define CONFIG_NET_MULTI 411 412 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 413 #define CONFIG_DOS_PARTITION 414 #endif /* CONFIG_PCI */ 415 416 /* SATA */ 417 #ifdef CONFIG_FSL_SATA_V2 418 #define CONFIG_LIBATA 419 #define CONFIG_FSL_SATA 420 421 #define CONFIG_SYS_SATA_MAX_DEVICE 2 422 #define CONFIG_SATA1 423 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 424 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 425 #define CONFIG_SATA2 426 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 427 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 428 429 #define CONFIG_LBA48 430 #define CONFIG_CMD_SATA 431 #define CONFIG_DOS_PARTITION 432 #define CONFIG_CMD_EXT2 433 #endif 434 435 #ifdef CONFIG_FMAN_ENET 436 #define CONFIG_SYS_TBIPA_VALUE 8 437 #define CONFIG_MII /* MII PHY management */ 438 #define CONFIG_ETHPRIME "FM1@DTSEC4" 439 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 440 #endif 441 442 /* 443 * Environment 444 */ 445 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 446 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 447 448 /* 449 * Command line configuration. 450 */ 451 #define CONFIG_CMD_DHCP 452 #define CONFIG_CMD_ERRATA 453 #define CONFIG_CMD_GREPENV 454 #define CONFIG_CMD_IRQ 455 #define CONFIG_CMD_I2C 456 #define CONFIG_CMD_MII 457 #define CONFIG_CMD_PING 458 #define CONFIG_CMD_REGINFO 459 460 #ifdef CONFIG_PCI 461 #define CONFIG_CMD_PCI 462 #endif 463 464 /* 465 * USB 466 */ 467 #define CONFIG_HAS_FSL_DR_USB 468 #define CONFIG_HAS_FSL_MPH_USB 469 470 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 471 #define CONFIG_CMD_USB 472 #define CONFIG_USB_STORAGE 473 #define CONFIG_USB_EHCI 474 #define CONFIG_USB_EHCI_FSL 475 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 476 #define CONFIG_CMD_EXT2 477 #define CONFIG_EHCI_IS_TDI 478 #define CONFIG_USB_KEYBOARD 479 #define CONFIG_SYS_USB_EVENT_POLL 480 /* _VIA_CONTROL_EP */ 481 #define CONFIG_CONSOLE_MUX 482 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 483 #endif 484 485 #ifdef CONFIG_MMC 486 #define CONFIG_FSL_ESDHC 487 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 488 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 489 #define CONFIG_CMD_MMC 490 #define CONFIG_GENERIC_MMC 491 #define CONFIG_CMD_EXT2 492 #define CONFIG_CMD_FAT 493 #define CONFIG_DOS_PARTITION 494 #endif 495 496 /* 497 * Miscellaneous configurable options 498 */ 499 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 500 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 501 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 502 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 503 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 504 #ifdef CONFIG_CMD_KGDB 505 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 506 #else 507 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 508 #endif 509 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 510 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 511 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 512 513 /* 514 * For booting Linux, the board info and command line data 515 * have to be in the first 64 MB of memory, since this is 516 * the maximum mapped by the Linux kernel during initialization. 517 */ 518 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 519 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 520 521 #ifdef CONFIG_CMD_KGDB 522 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 523 #endif 524 525 /* 526 * Environment Configuration 527 */ 528 #define CONFIG_ROOTPATH "/opt/nfsroot" 529 #define CONFIG_BOOTFILE "uImage" 530 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 531 532 /* default location for tftp and bootm */ 533 #define CONFIG_LOADADDR 1000000 534 535 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 536 537 #define CONFIG_BAUDRATE 115200 538 539 #define __USB_PHY_TYPE utmi 540 541 #define CONFIG_EXTRA_ENV_SETTINGS \ 542 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 543 "bank_intlv=cs0_cs1;" \ 544 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 545 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 546 "netdev=eth0\0" \ 547 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 548 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 549 "consoledev=ttyS0\0" \ 550 "ramdiskaddr=2000000\0" \ 551 "fdtaddr=c00000\0" \ 552 "bdev=sda3\0" 553 554 #define CONFIG_HDBOOT \ 555 "setenv bootargs root=/dev/$bdev rw " \ 556 "console=$consoledev,$baudrate $othbootargs;" \ 557 "tftp $loadaddr $bootfile;" \ 558 "tftp $fdtaddr $fdtfile;" \ 559 "bootm $loadaddr - $fdtaddr" 560 561 #define CONFIG_NFSBOOTCOMMAND \ 562 "setenv bootargs root=/dev/nfs rw " \ 563 "nfsroot=$serverip:$rootpath " \ 564 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 565 "console=$consoledev,$baudrate $othbootargs;" \ 566 "tftp $loadaddr $bootfile;" \ 567 "tftp $fdtaddr $fdtfile;" \ 568 "bootm $loadaddr - $fdtaddr" 569 570 #define CONFIG_RAMBOOTCOMMAND \ 571 "setenv bootargs root=/dev/ram rw " \ 572 "console=$consoledev,$baudrate $othbootargs;" \ 573 "tftp $ramdiskaddr $ramdiskfile;" \ 574 "tftp $loadaddr $bootfile;" \ 575 "tftp $fdtaddr $fdtfile;" \ 576 "bootm $loadaddr $ramdiskaddr $fdtaddr" 577 578 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 579 580 #include <asm/fsl_secure_boot.h> 581 582 #ifdef CONFIG_SECURE_BOOT 583 #endif 584 585 #endif /* __CONFIG_H */ 586