1 /* 2 * Based on corenet_ds.h 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_CYRUS 11 12 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040) 13 #error Must call Cyrus CONFIG with a specific CPU enabled. 14 #endif 15 16 #define CONFIG_SDCARD 17 #define CONFIG_FSL_SATA_V2 18 #define CONFIG_PCIE3 19 #define CONFIG_PCIE4 20 #ifdef CONFIG_ARCH_P5020 21 #define CONFIG_SYS_FSL_RAID_ENGINE 22 #define CONFIG_SYS_DPAA_RMAN 23 #endif 24 #define CONFIG_SYS_DPAA_PME 25 26 /* 27 * Corenet DS style board configuration file 28 */ 29 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 30 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 31 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg 32 #if defined(CONFIG_ARCH_P5020) 33 #define CONFIG_SYS_CLK_FREQ 133000000 34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg 35 #elif defined(CONFIG_ARCH_P5040) 36 #define CONFIG_SYS_CLK_FREQ 100000000 37 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg 38 #endif 39 40 /* High Level Configuration Options */ 41 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 42 #define CONFIG_MP /* support multiple processors */ 43 44 #define CONFIG_SYS_MMC_MAX_DEVICE 1 45 46 #ifndef CONFIG_SYS_TEXT_BASE 47 #define CONFIG_SYS_TEXT_BASE 0xeff40000 48 #endif 49 50 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 51 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 52 #define CONFIG_PCIE1 /* PCIE controller 1 */ 53 #define CONFIG_PCIE2 /* PCIE controller 2 */ 54 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 55 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 56 57 #define CONFIG_ENV_OVERWRITE 58 59 #if defined(CONFIG_SDCARD) 60 #define CONFIG_SYS_EXTRA_ENV_RELOC 61 #define CONFIG_FSL_FIXED_MMC_LOCATION 62 #define CONFIG_SYS_MMC_ENV_DEV 0 63 #define CONFIG_ENV_SIZE 0x2000 64 #define CONFIG_ENV_OFFSET (512 * 1658) 65 #endif 66 67 /* 68 * These can be toggled for performance analysis, otherwise use default. 69 */ 70 #define CONFIG_SYS_CACHE_STASHING 71 #define CONFIG_BACKSIDE_L2_CACHE 72 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 73 #define CONFIG_BTB /* toggle branch predition */ 74 #define CONFIG_DDR_ECC 75 #ifdef CONFIG_DDR_ECC 76 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 77 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 78 #endif 79 80 #define CONFIG_ENABLE_36BIT_PHYS 81 82 #ifdef CONFIG_PHYS_64BIT 83 #define CONFIG_ADDR_MAP 84 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 85 #endif 86 87 /* test POST memory test */ 88 #undef CONFIG_POST 89 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 90 #define CONFIG_SYS_MEMTEST_END 0x00400000 91 #define CONFIG_SYS_ALT_MEMTEST 92 93 /* 94 * Config the L3 Cache as L3 SRAM 95 */ 96 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 97 #ifdef CONFIG_PHYS_64BIT 98 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 99 #else 100 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 101 #endif 102 #define CONFIG_SYS_L3_SIZE (1024 << 10) 103 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 104 105 #ifdef CONFIG_PHYS_64BIT 106 #define CONFIG_SYS_DCSRBAR 0xf0000000 107 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 108 #endif 109 110 /* 111 * DDR Setup 112 */ 113 #define CONFIG_VERY_BIG_RAM 114 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 115 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 116 117 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 118 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 119 120 #define CONFIG_DDR_SPD 121 122 #define CONFIG_SYS_SPD_BUS_NUM 1 123 #define SPD_EEPROM_ADDRESS1 0x51 124 #define SPD_EEPROM_ADDRESS2 0x52 125 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 126 127 /* 128 * Local Bus Definitions 129 */ 130 131 #define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ 132 #ifdef CONFIG_PHYS_64BIT 133 #define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull 134 #else 135 #define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE 136 #endif 137 138 #define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ 139 #ifdef CONFIG_PHYS_64BIT 140 #define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull 141 #else 142 #define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE 143 #endif 144 145 /* Set the local bus clock 1/16 of platform clock */ 146 #define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) 147 148 #define CONFIG_SYS_BR0_PRELIM \ 149 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) 150 #define CONFIG_SYS_BR1_PRELIM \ 151 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) 152 153 #define CONFIG_SYS_OR0_PRELIM 0xfff00010 154 #define CONFIG_SYS_OR1_PRELIM 0xfff00010 155 156 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 157 158 #if defined(CONFIG_RAMBOOT_PBL) 159 #define CONFIG_SYS_RAMBOOT 160 #endif 161 162 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 163 #define CONFIG_MISC_INIT_R 164 165 #define CONFIG_HWCONFIG 166 167 /* define to use L1 as initial stack */ 168 #define CONFIG_L1_INIT_RAM 169 #define CONFIG_SYS_INIT_RAM_LOCK 170 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 171 #ifdef CONFIG_PHYS_64BIT 172 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 173 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 174 /* The assembler doesn't like typecast */ 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 176 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 177 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 178 #else 179 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 182 #endif 183 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 184 185 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 186 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 187 188 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 189 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 190 191 /* Serial Port - controlled on board with jumper J8 192 * open - index 2 193 * shorted - index 1 194 */ 195 #define CONFIG_CONS_INDEX 1 196 #define CONFIG_SYS_NS16550_SERIAL 197 #define CONFIG_SYS_NS16550_REG_SIZE 1 198 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 199 200 #define CONFIG_SYS_BAUDRATE_TABLE \ 201 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 202 203 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 204 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 205 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 206 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 207 208 /* I2C */ 209 #define CONFIG_SYS_I2C 210 #define CONFIG_SYS_I2C_FSL 211 #define CONFIG_I2C_MULTI_BUS 212 #define CONFIG_I2C_CMD_TREE 213 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ 214 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 215 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 216 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ 217 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 218 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 219 #define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ 220 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 221 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 222 #define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ 223 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 224 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 225 226 #define CONFIG_ID_EEPROM 227 #define CONFIG_SYS_I2C_EEPROM_NXID 228 #define CONFIG_SYS_EEPROM_BUS_NUM 0 229 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 230 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 231 232 #define CONFIG_SYS_I2C_GENERIC_MAC 233 #define CONFIG_SYS_I2C_MAC1_BUS 3 234 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 235 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 236 #define CONFIG_SYS_I2C_MAC2_BUS 0 237 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 238 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa 239 240 #define CONFIG_RTC_MCP79411 1 241 #define CONFIG_SYS_RTC_BUS_NUM 3 242 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f 243 244 /* 245 * eSPI - Enhanced SPI 246 */ 247 248 /* 249 * General PCI 250 * Memory space is mapped 1-1, but I/O space must start from 0. 251 */ 252 253 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 254 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 255 #ifdef CONFIG_PHYS_64BIT 256 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 257 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 258 #else 259 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 260 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 261 #endif 262 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 263 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 264 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 265 #ifdef CONFIG_PHYS_64BIT 266 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 267 #else 268 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 269 #endif 270 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 271 272 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 273 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 274 #ifdef CONFIG_PHYS_64BIT 275 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 276 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 277 #else 278 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 279 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 280 #endif 281 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 282 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 283 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 284 #ifdef CONFIG_PHYS_64BIT 285 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 286 #else 287 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 288 #endif 289 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 290 291 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 292 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 293 #ifdef CONFIG_PHYS_64BIT 294 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 295 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 296 #else 297 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 298 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 299 #endif 300 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 301 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 302 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 303 #ifdef CONFIG_PHYS_64BIT 304 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 305 #else 306 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 307 #endif 308 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 309 310 /* controller 4, Base address 203000 */ 311 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 312 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 313 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 314 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 315 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 316 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 317 318 /* Qman/Bman */ 319 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 320 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 321 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 322 #ifdef CONFIG_PHYS_64BIT 323 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 324 #else 325 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 326 #endif 327 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 328 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 329 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 330 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 331 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 332 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 333 CONFIG_SYS_BMAN_CENA_SIZE) 334 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 335 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 336 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 337 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 338 #ifdef CONFIG_PHYS_64BIT 339 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 340 #else 341 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 342 #endif 343 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 344 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 345 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 346 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 347 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 348 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 349 CONFIG_SYS_QMAN_CENA_SIZE) 350 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 351 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 352 353 #define CONFIG_SYS_DPAA_FMAN 354 /* Default address of microcode for the Linux Fman driver */ 355 /* 356 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 357 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 358 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 359 */ 360 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 361 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 362 363 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 364 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 365 366 #ifdef CONFIG_SYS_DPAA_FMAN 367 #define CONFIG_FMAN_ENET 368 #endif 369 370 #ifdef CONFIG_PCI 371 #define CONFIG_PCI_INDIRECT_BRIDGE 372 373 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 374 #endif /* CONFIG_PCI */ 375 376 /* SATA */ 377 #ifdef CONFIG_FSL_SATA_V2 378 #define CONFIG_SYS_SATA_MAX_DEVICE 2 379 #define CONFIG_SATA1 380 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 381 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 382 #define CONFIG_SATA2 383 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 384 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 385 386 #define CONFIG_LBA48 387 #endif 388 389 #ifdef CONFIG_FMAN_ENET 390 #define CONFIG_SYS_TBIPA_VALUE 8 391 #define CONFIG_MII /* MII PHY management */ 392 #define CONFIG_ETHPRIME "FM1@DTSEC4" 393 #endif 394 395 /* 396 * Environment 397 */ 398 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 399 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 400 401 /* 402 * USB 403 */ 404 #define CONFIG_HAS_FSL_DR_USB 405 #define CONFIG_HAS_FSL_MPH_USB 406 407 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 408 #define CONFIG_USB_EHCI_FSL 409 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 410 #define CONFIG_EHCI_IS_TDI 411 /* _VIA_CONTROL_EP */ 412 #endif 413 414 #ifdef CONFIG_MMC 415 #define CONFIG_FSL_ESDHC 416 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 417 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 418 #endif 419 420 /* 421 * Miscellaneous configurable options 422 */ 423 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 424 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 425 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 426 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 427 428 /* 429 * For booting Linux, the board info and command line data 430 * have to be in the first 64 MB of memory, since this is 431 * the maximum mapped by the Linux kernel during initialization. 432 */ 433 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 434 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 435 436 #ifdef CONFIG_CMD_KGDB 437 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 438 #endif 439 440 /* 441 * Environment Configuration 442 */ 443 #define CONFIG_ROOTPATH "/opt/nfsroot" 444 #define CONFIG_BOOTFILE "uImage" 445 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 446 447 /* default location for tftp and bootm */ 448 #define CONFIG_LOADADDR 1000000 449 450 #define __USB_PHY_TYPE utmi 451 452 #define CONFIG_EXTRA_ENV_SETTINGS \ 453 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 454 "bank_intlv=cs0_cs1;" \ 455 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 456 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 457 "netdev=eth0\0" \ 458 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 459 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 460 "consoledev=ttyS0\0" \ 461 "ramdiskaddr=2000000\0" \ 462 "fdtaddr=1e00000\0" \ 463 "bdev=sda3\0" 464 465 #define CONFIG_HDBOOT \ 466 "setenv bootargs root=/dev/$bdev rw " \ 467 "console=$consoledev,$baudrate $othbootargs;" \ 468 "tftp $loadaddr $bootfile;" \ 469 "tftp $fdtaddr $fdtfile;" \ 470 "bootm $loadaddr - $fdtaddr" 471 472 #define CONFIG_NFSBOOTCOMMAND \ 473 "setenv bootargs root=/dev/nfs rw " \ 474 "nfsroot=$serverip:$rootpath " \ 475 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 476 "console=$consoledev,$baudrate $othbootargs;" \ 477 "tftp $loadaddr $bootfile;" \ 478 "tftp $fdtaddr $fdtfile;" \ 479 "bootm $loadaddr - $fdtaddr" 480 481 #define CONFIG_RAMBOOTCOMMAND \ 482 "setenv bootargs root=/dev/ram rw " \ 483 "console=$consoledev,$baudrate $othbootargs;" \ 484 "tftp $ramdiskaddr $ramdiskfile;" \ 485 "tftp $loadaddr $bootfile;" \ 486 "tftp $fdtaddr $fdtfile;" \ 487 "bootm $loadaddr $ramdiskaddr $fdtaddr" 488 489 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 490 491 #include <asm/fsl_secure_boot.h> 492 493 #ifdef CONFIG_SECURE_BOOT 494 #endif 495 496 #endif /* __CONFIG_H */ 497