1 /* 2 * Common board functions for siemens AT91SAM9G45 based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9m10g45ek.h 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/hardware.h> 18 #include <linux/sizes.h> 19 20 /* 21 * Warning: changing CONFIG_SYS_TEXT_BASE requires 22 * adapting the initial boot program. 23 * Since the linker has to swallow that define, we must use a pure 24 * hex number here! 25 */ 26 27 #define CONFIG_SYS_TEXT_BASE 0x72000000 28 29 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 34 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_SETUP_MEMORY_TAGS 37 #define CONFIG_INITRD_TAG 38 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 39 #define CONFIG_BOARD_EARLY_INIT_F 40 #define CONFIG_DISPLAY_CPUINFO 41 42 /* general purpose I/O */ 43 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 44 #define CONFIG_AT91_GPIO 45 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 46 47 /* serial console */ 48 #define CONFIG_ATMEL_USART 49 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 50 #define CONFIG_USART_ID ATMEL_ID_SYS 51 52 /* LED */ 53 #define CONFIG_AT91_LED 54 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 55 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 56 57 58 /* 59 * BOOTP options 60 */ 61 #define CONFIG_BOOTP_BOOTFILESIZE 62 #define CONFIG_BOOTP_BOOTPATH 63 #define CONFIG_BOOTP_GATEWAY 64 #define CONFIG_BOOTP_HOSTNAME 65 66 /* 67 * Command line configuration. 68 */ 69 #define CONFIG_CMD_NAND 70 71 /* SDRAM */ 72 #define CONFIG_NR_DRAM_BANKS 1 73 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 74 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 75 76 #define CONFIG_SYS_INIT_SP_ADDR \ 77 (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE) 78 79 /* No NOR flash */ 80 #define CONFIG_SYS_NO_FLASH 81 82 /* NAND flash */ 83 #ifdef CONFIG_CMD_NAND 84 #define CONFIG_NAND_ATMEL 85 #define CONFIG_SYS_MAX_NAND_DEVICE 1 86 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 87 #define CONFIG_SYS_NAND_DBW_8 88 /* our ALE is AD21 */ 89 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 90 /* our CLE is AD22 */ 91 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 92 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 93 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 94 #endif 95 96 /* Ethernet */ 97 #define CONFIG_MACB 98 #define CONFIG_PHYLIB 99 #define CONFIG_RMII 100 #define CONFIG_NET_RETRY_COUNT 20 101 #define CONFIG_AT91_WANTS_COMMON_PHY 102 103 /* USB */ 104 #define CONFIG_USB_EHCI 105 #define CONFIG_USB_EHCI_ATMEL 106 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 107 #define CONFIG_DOS_PARTITION 108 109 /* USB DFU support */ 110 #define CONFIG_CMD_MTDPARTS 111 #define CONFIG_MTD_DEVICE 112 #define CONFIG_MTD_PARTITIONS 113 114 /* DFU class support */ 115 #define CONFIG_USB_FUNCTION_DFU 116 #define CONFIG_DFU_NAND 117 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 118 #define DFU_MANIFEST_POLL_TIMEOUT 25000 119 120 #define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 121 122 /* bootstrap + u-boot + env in nandflash */ 123 #define CONFIG_ENV_IS_IN_NAND 124 #define CONFIG_ENV_OFFSET 0x100000 125 #define CONFIG_ENV_OFFSET_REDUND 0x180000 126 #define CONFIG_ENV_SIZE SZ_128K 127 128 #define CONFIG_BOOTCOMMAND \ 129 "nand read 0x70000000 0x200000 0x300000;" \ 130 "bootm 0x70000000" 131 #define CONFIG_BOOTARGS \ 132 "console=ttyS0,115200 earlyprintk " \ 133 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 134 "256k(env),256k(env_redundant),256k(spare)," \ 135 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 136 "root=/dev/mtdblock7 rw rootfstype=jffs2" 137 138 #define CONFIG_BAUDRATE 115200 139 140 #define CONFIG_SYS_CBSIZE 256 141 #define CONFIG_SYS_MAXARGS 16 142 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 143 sizeof(CONFIG_SYS_PROMPT) + 16) 144 #define CONFIG_SYS_LONGHELP 145 #define CONFIG_CMDLINE_EDITING 146 #define CONFIG_AUTO_COMPLETE 147 148 /* 149 * Size of malloc() pool 150 */ 151 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 152 SZ_4M, 0x1000) 153 154 /* Defines for SPL */ 155 #define CONFIG_SPL_FRAMEWORK 156 #define CONFIG_SPL_TEXT_BASE 0x300000 157 #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) 158 #define CONFIG_SPL_STACK (SZ_16K) 159 160 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 161 #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) 162 163 #define CONFIG_SPL_BOARD_INIT 164 #define CONFIG_SPL_NAND_DRIVERS 165 #define CONFIG_SPL_NAND_BASE 166 #define CONFIG_SPL_NAND_ECC 167 #define CONFIG_SPL_NAND_RAW_ONLY 168 #define CONFIG_SPL_NAND_SOFTECC 169 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 170 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 171 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 172 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 173 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 174 175 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 176 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 177 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 178 CONFIG_SYS_NAND_PAGE_SIZE) 179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 180 #define CONFIG_SYS_NAND_ECCSIZE 256 181 #define CONFIG_SYS_NAND_ECCBYTES 3 182 #define CONFIG_SYS_NAND_OOBSIZE 64 183 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 184 48, 49, 50, 51, 52, 53, 54, 55, \ 185 56, 57, 58, 59, 60, 61, 62, 63, } 186 187 #define CONFIG_SPL_ATMEL_SIZE 188 #define CONFIG_SYS_MASTER_CLOCK 132096000 189 #define AT91_PLL_LOCK_TIMEOUT 1000000 190 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 191 #define CONFIG_SYS_MCKR 0x1301 192 #define CONFIG_SYS_MCKR_CSS 0x1302 193 194 #endif 195