1 /* 2 * Common board functions for siemens AT91SAM9G45 based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9m10g45ek.h 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/hardware.h> 18 #include <linux/sizes.h> 19 20 /* 21 * Warning: changing CONFIG_SYS_TEXT_BASE requires 22 * adapting the initial boot program. 23 * Since the linker has to swallow that define, we must use a pure 24 * hex number here! 25 */ 26 27 #define CONFIG_SYS_TEXT_BASE 0x72000000 28 29 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 34 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_SETUP_MEMORY_TAGS 37 #define CONFIG_INITRD_TAG 38 #define CONFIG_SKIP_LOWLEVEL_INIT 39 #define CONFIG_BOARD_EARLY_INIT_F 40 #define CONFIG_DISPLAY_CPUINFO 41 42 /* general purpose I/O */ 43 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 44 #define CONFIG_AT91_GPIO 45 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 46 47 /* serial console */ 48 #define CONFIG_ATMEL_USART 49 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 50 #define CONFIG_USART_ID ATMEL_ID_SYS 51 52 /* LED */ 53 #define CONFIG_AT91_LED 54 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 55 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 56 57 #define CONFIG_BOOTDELAY 3 58 59 /* 60 * BOOTP options 61 */ 62 #define CONFIG_BOOTP_BOOTFILESIZE 63 #define CONFIG_BOOTP_BOOTPATH 64 #define CONFIG_BOOTP_GATEWAY 65 #define CONFIG_BOOTP_HOSTNAME 66 67 /* 68 * Command line configuration. 69 */ 70 #define CONFIG_CMD_NAND 71 72 /* SDRAM */ 73 #define CONFIG_NR_DRAM_BANKS 1 74 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 75 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 76 77 #define CONFIG_SYS_INIT_SP_ADDR \ 78 (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE) 79 80 /* No NOR flash */ 81 #define CONFIG_SYS_NO_FLASH 82 83 /* NAND flash */ 84 #ifdef CONFIG_CMD_NAND 85 #define CONFIG_NAND_ATMEL 86 #define CONFIG_SYS_MAX_NAND_DEVICE 1 87 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 88 #define CONFIG_SYS_NAND_DBW_8 89 /* our ALE is AD21 */ 90 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 91 /* our CLE is AD22 */ 92 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 93 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 94 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 95 #endif 96 97 /* Ethernet */ 98 #define CONFIG_MACB 99 #define CONFIG_RMII 100 #define CONFIG_NET_RETRY_COUNT 20 101 #define CONFIG_AT91_WANTS_COMMON_PHY 102 103 /* USB */ 104 #define CONFIG_USB_EHCI 105 #define CONFIG_USB_EHCI_ATMEL 106 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 107 #define CONFIG_DOS_PARTITION 108 #define CONFIG_USB_STORAGE 109 110 /* USB DFU support */ 111 #define CONFIG_CMD_MTDPARTS 112 #define CONFIG_MTD_DEVICE 113 #define CONFIG_MTD_PARTITIONS 114 115 /* DFU class support */ 116 #define CONFIG_USB_FUNCTION_DFU 117 #define CONFIG_DFU_NAND 118 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 119 #define DFU_MANIFEST_POLL_TIMEOUT 25000 120 121 #define CONFIG_SYS_CACHELINE_SIZE SZ_8K 122 #define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 123 124 /* bootstrap + u-boot + env in nandflash */ 125 #define CONFIG_ENV_IS_IN_NAND 126 #define CONFIG_ENV_OFFSET 0x100000 127 #define CONFIG_ENV_OFFSET_REDUND 0x180000 128 #define CONFIG_ENV_SIZE SZ_128K 129 130 #define CONFIG_BOOTCOMMAND \ 131 "nand read 0x70000000 0x200000 0x300000;" \ 132 "bootm 0x70000000" 133 #define CONFIG_BOOTARGS \ 134 "console=ttyS0,115200 earlyprintk " \ 135 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 136 "256k(env),256k(env_redundant),256k(spare)," \ 137 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 138 "root=/dev/mtdblock7 rw rootfstype=jffs2" 139 140 #define CONFIG_BAUDRATE 115200 141 142 #define CONFIG_SYS_CBSIZE 256 143 #define CONFIG_SYS_MAXARGS 16 144 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 145 sizeof(CONFIG_SYS_PROMPT) + 16) 146 #define CONFIG_SYS_LONGHELP 147 #define CONFIG_CMDLINE_EDITING 148 #define CONFIG_AUTO_COMPLETE 149 150 /* 151 * Size of malloc() pool 152 */ 153 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 154 SZ_4M, 0x1000) 155 156 /* Defines for SPL */ 157 #define CONFIG_SPL_FRAMEWORK 158 #define CONFIG_SPL_TEXT_BASE 0x300000 159 #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) 160 #define CONFIG_SPL_STACK (SZ_16K) 161 162 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 163 #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) 164 165 #define CONFIG_SPL_LIBCOMMON_SUPPORT 166 #define CONFIG_SPL_LIBGENERIC_SUPPORT 167 #define CONFIG_SPL_SERIAL_SUPPORT 168 169 #define CONFIG_SPL_BOARD_INIT 170 #define CONFIG_SPL_GPIO_SUPPORT 171 #define CONFIG_SPL_NAND_SUPPORT 172 #define CONFIG_SPL_NAND_DRIVERS 173 #define CONFIG_SPL_NAND_BASE 174 #define CONFIG_SPL_NAND_ECC 175 #define CONFIG_SPL_NAND_RAW_ONLY 176 #define CONFIG_SPL_NAND_SOFTECC 177 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 178 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 179 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 180 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 181 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 182 183 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 184 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 185 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 186 CONFIG_SYS_NAND_PAGE_SIZE) 187 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 188 #define CONFIG_SYS_NAND_ECCSIZE 256 189 #define CONFIG_SYS_NAND_ECCBYTES 3 190 #define CONFIG_SYS_NAND_OOBSIZE 64 191 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 192 48, 49, 50, 51, 52, 53, 54, 55, \ 193 56, 57, 58, 59, 60, 61, 62, 63, } 194 195 #define CONFIG_SPL_ATMEL_SIZE 196 #define CONFIG_SYS_MASTER_CLOCK 132096000 197 #define AT91_PLL_LOCK_TIMEOUT 1000000 198 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 199 #define CONFIG_SYS_MCKR 0x1301 200 #define CONFIG_SYS_MCKR_CSS 0x1302 201 202 #endif 203