1 /* 2 * Common board functions for siemens AT91SAM9G45 based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9m10g45ek.h 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/hardware.h> 18 #include <linux/sizes.h> 19 20 /* 21 * Warning: changing CONFIG_SYS_TEXT_BASE requires 22 * adapting the initial boot program. 23 * Since the linker has to swallow that define, we must use a pure 24 * hex number here! 25 */ 26 27 #define CONFIG_SYS_TEXT_BASE 0x72000000 28 29 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 34 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_SETUP_MEMORY_TAGS 37 #define CONFIG_INITRD_TAG 38 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 39 40 /* general purpose I/O */ 41 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 42 #define CONFIG_AT91_GPIO 43 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 44 45 /* serial console */ 46 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 47 #define CONFIG_USART_ID ATMEL_ID_SYS 48 49 /* LED */ 50 #define CONFIG_AT91_LED 51 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 52 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 53 54 55 /* 56 * BOOTP options 57 */ 58 #define CONFIG_BOOTP_BOOTFILESIZE 59 #define CONFIG_BOOTP_BOOTPATH 60 #define CONFIG_BOOTP_GATEWAY 61 #define CONFIG_BOOTP_HOSTNAME 62 63 /* SDRAM */ 64 #define CONFIG_NR_DRAM_BANKS 1 65 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 66 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 67 68 #define CONFIG_SYS_INIT_SP_ADDR \ 69 (CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE) 70 71 /* NAND flash */ 72 #ifdef CONFIG_CMD_NAND 73 #define CONFIG_NAND_ATMEL 74 #define CONFIG_SYS_MAX_NAND_DEVICE 1 75 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 76 #define CONFIG_SYS_NAND_DBW_8 77 /* our ALE is AD21 */ 78 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 79 /* our CLE is AD22 */ 80 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 81 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 82 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 83 #endif 84 85 /* Ethernet */ 86 #define CONFIG_MACB 87 #define CONFIG_PHYLIB 88 #define CONFIG_RMII 89 #define CONFIG_NET_RETRY_COUNT 20 90 #define CONFIG_AT91_WANTS_COMMON_PHY 91 92 #define CONFIG_MTD_DEVICE 93 #define CONFIG_MTD_PARTITIONS 94 95 /* DFU class support */ 96 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 97 #define DFU_MANIFEST_POLL_TIMEOUT 25000 98 99 #define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 100 101 /* bootstrap + u-boot + env in nandflash */ 102 #define CONFIG_ENV_OFFSET 0x100000 103 #define CONFIG_ENV_OFFSET_REDUND 0x180000 104 #define CONFIG_ENV_SIZE SZ_128K 105 106 #define CONFIG_BOOTCOMMAND \ 107 "nand read 0x70000000 0x200000 0x300000;" \ 108 "bootm 0x70000000" 109 #define CONFIG_BOOTARGS \ 110 "console=ttyS0,115200 earlyprintk " \ 111 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 112 "256k(env),256k(env_redundant),256k(spare)," \ 113 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 114 "root=/dev/mtdblock7 rw rootfstype=jffs2" 115 116 #define CONFIG_SYS_CBSIZE 256 117 #define CONFIG_SYS_MAXARGS 16 118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 119 sizeof(CONFIG_SYS_PROMPT) + 16) 120 #define CONFIG_SYS_LONGHELP 121 #define CONFIG_CMDLINE_EDITING 122 #define CONFIG_AUTO_COMPLETE 123 124 /* 125 * Size of malloc() pool 126 */ 127 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128 SZ_4M, 0x1000) 129 130 /* Defines for SPL */ 131 #define CONFIG_SPL_FRAMEWORK 132 #define CONFIG_SPL_TEXT_BASE 0x300000 133 #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) 134 #define CONFIG_SPL_STACK (SZ_16K) 135 136 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 137 #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) 138 139 #define CONFIG_SPL_NAND_DRIVERS 140 #define CONFIG_SPL_NAND_BASE 141 #define CONFIG_SPL_NAND_ECC 142 #define CONFIG_SPL_NAND_RAW_ONLY 143 #define CONFIG_SPL_NAND_SOFTECC 144 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 145 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 146 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 147 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 148 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 149 150 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 151 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 152 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 153 CONFIG_SYS_NAND_PAGE_SIZE) 154 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 155 #define CONFIG_SYS_NAND_ECCSIZE 256 156 #define CONFIG_SYS_NAND_ECCBYTES 3 157 #define CONFIG_SYS_NAND_OOBSIZE 64 158 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 159 48, 49, 50, 51, 52, 53, 54, 55, \ 160 56, 57, 58, 59, 60, 61, 62, 63, } 161 162 #define CONFIG_SPL_ATMEL_SIZE 163 #define CONFIG_SYS_MASTER_CLOCK 132096000 164 #define AT91_PLL_LOCK_TIMEOUT 1000000 165 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 166 #define CONFIG_SYS_MCKR 0x1301 167 #define CONFIG_SYS_MCKR_CSS 0x1302 168 169 #endif 170