1 /* 2 * Copyright 2009-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Corenet DS style board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_DISPLAY_BOARDINFO 14 15 #include "../board/freescale/common/ics307_clk.h" 16 17 #ifdef CONFIG_RAMBOOT_PBL 18 #ifdef CONFIG_SECURE_BOOT 19 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 20 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 21 #ifdef CONFIG_NAND 22 #define CONFIG_RAMBOOT_NAND 23 #endif 24 #define CONFIG_BOOTSCRIPT_COPY_RAM 25 #else 26 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 27 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 28 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg 29 #if defined(CONFIG_P3041DS) 30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg 31 #elif defined(CONFIG_P4080DS) 32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg 33 #elif defined(CONFIG_P5020DS) 34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg 35 #elif defined(CONFIG_P5040DS) 36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg 37 #endif 38 #endif 39 #endif 40 41 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 42 /* Set 1M boot space */ 43 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 45 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 46 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 47 #define CONFIG_SYS_NO_FLASH 48 #endif 49 50 /* High Level Configuration Options */ 51 #define CONFIG_BOOKE 52 #define CONFIG_E500 /* BOOKE e500 family */ 53 #define CONFIG_E500MC /* BOOKE e500mc family */ 54 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 55 #define CONFIG_MP /* support multiple processors */ 56 57 #ifndef CONFIG_SYS_TEXT_BASE 58 #define CONFIG_SYS_TEXT_BASE 0xeff40000 59 #endif 60 61 #ifndef CONFIG_RESET_VECTOR_ADDRESS 62 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 63 #endif 64 65 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 66 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 67 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 68 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 69 #define CONFIG_PCI /* Enable PCI/PCIE */ 70 #define CONFIG_PCIE1 /* PCIE controller 1 */ 71 #define CONFIG_PCIE2 /* PCIE controller 2 */ 72 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 73 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 74 75 #define CONFIG_FSL_LAW /* Use common FSL init code */ 76 77 #define CONFIG_ENV_OVERWRITE 78 79 #ifdef CONFIG_SYS_NO_FLASH 80 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 81 #define CONFIG_ENV_IS_NOWHERE 82 #endif 83 #else 84 #define CONFIG_FLASH_CFI_DRIVER 85 #define CONFIG_SYS_FLASH_CFI 86 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 87 #endif 88 89 #if defined(CONFIG_SPIFLASH) 90 #define CONFIG_SYS_EXTRA_ENV_RELOC 91 #define CONFIG_ENV_IS_IN_SPI_FLASH 92 #define CONFIG_ENV_SPI_BUS 0 93 #define CONFIG_ENV_SPI_CS 0 94 #define CONFIG_ENV_SPI_MAX_HZ 10000000 95 #define CONFIG_ENV_SPI_MODE 0 96 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 97 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 98 #define CONFIG_ENV_SECT_SIZE 0x10000 99 #elif defined(CONFIG_SDCARD) 100 #define CONFIG_SYS_EXTRA_ENV_RELOC 101 #define CONFIG_ENV_IS_IN_MMC 102 #define CONFIG_FSL_FIXED_MMC_LOCATION 103 #define CONFIG_SYS_MMC_ENV_DEV 0 104 #define CONFIG_ENV_SIZE 0x2000 105 #define CONFIG_ENV_OFFSET (512 * 1658) 106 #elif defined(CONFIG_NAND) 107 #define CONFIG_SYS_EXTRA_ENV_RELOC 108 #define CONFIG_ENV_IS_IN_NAND 109 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 110 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 111 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 112 #define CONFIG_ENV_IS_IN_REMOTE 113 #define CONFIG_ENV_ADDR 0xffe20000 114 #define CONFIG_ENV_SIZE 0x2000 115 #elif defined(CONFIG_ENV_IS_NOWHERE) 116 #define CONFIG_ENV_SIZE 0x2000 117 #else 118 #define CONFIG_ENV_IS_IN_FLASH 119 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 120 #define CONFIG_ENV_SIZE 0x2000 121 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 122 #endif 123 124 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 125 126 /* 127 * These can be toggled for performance analysis, otherwise use default. 128 */ 129 #define CONFIG_SYS_CACHE_STASHING 130 #define CONFIG_BACKSIDE_L2_CACHE 131 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 132 #define CONFIG_BTB /* toggle branch predition */ 133 #define CONFIG_DDR_ECC 134 #ifdef CONFIG_DDR_ECC 135 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 136 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 137 #endif 138 139 #define CONFIG_ENABLE_36BIT_PHYS 140 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_ADDR_MAP 143 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 144 #endif 145 146 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 147 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 148 #define CONFIG_SYS_MEMTEST_END 0x00400000 149 #define CONFIG_SYS_ALT_MEMTEST 150 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 151 152 /* 153 * Config the L3 Cache as L3 SRAM 154 */ 155 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 156 #ifdef CONFIG_PHYS_64BIT 157 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 158 #else 159 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 160 #endif 161 #define CONFIG_SYS_L3_SIZE (1024 << 10) 162 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 163 164 #ifdef CONFIG_PHYS_64BIT 165 #define CONFIG_SYS_DCSRBAR 0xf0000000 166 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 167 #endif 168 169 /* EEPROM */ 170 #define CONFIG_ID_EEPROM 171 #define CONFIG_SYS_I2C_EEPROM_NXID 172 #define CONFIG_SYS_EEPROM_BUS_NUM 0 173 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 174 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 175 176 /* 177 * DDR Setup 178 */ 179 #define CONFIG_VERY_BIG_RAM 180 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 181 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 182 183 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 184 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 185 186 #define CONFIG_DDR_SPD 187 #define CONFIG_SYS_FSL_DDR3 188 189 #define CONFIG_SYS_SPD_BUS_NUM 1 190 #define SPD_EEPROM_ADDRESS1 0x51 191 #define SPD_EEPROM_ADDRESS2 0x52 192 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 193 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 194 195 /* 196 * Local Bus Definitions 197 */ 198 199 /* Set the local bus clock 1/8 of platform clock */ 200 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 201 202 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 203 #ifdef CONFIG_PHYS_64BIT 204 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 205 #else 206 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 207 #endif 208 209 #define CONFIG_SYS_FLASH_BR_PRELIM \ 210 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \ 211 | BR_PS_16 | BR_V) 212 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 213 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 214 215 #define CONFIG_SYS_BR1_PRELIM \ 216 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 217 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 218 219 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 220 #ifdef CONFIG_PHYS_64BIT 221 #define PIXIS_BASE_PHYS 0xfffdf0000ull 222 #else 223 #define PIXIS_BASE_PHYS PIXIS_BASE 224 #endif 225 226 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 227 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 228 229 #define PIXIS_LBMAP_SWITCH 7 230 #define PIXIS_LBMAP_MASK 0xf0 231 #define PIXIS_LBMAP_SHIFT 4 232 #define PIXIS_LBMAP_ALTBANK 0x40 233 234 #define CONFIG_SYS_FLASH_QUIET_TEST 235 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 236 237 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 238 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 239 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 240 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 241 242 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 243 244 #if defined(CONFIG_RAMBOOT_PBL) 245 #define CONFIG_SYS_RAMBOOT 246 #endif 247 248 /* Nand Flash */ 249 #ifdef CONFIG_NAND_FSL_ELBC 250 #define CONFIG_SYS_NAND_BASE 0xffa00000 251 #ifdef CONFIG_PHYS_64BIT 252 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 253 #else 254 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 255 #endif 256 257 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 258 #define CONFIG_SYS_MAX_NAND_DEVICE 1 259 #define CONFIG_CMD_NAND 260 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 261 262 /* NAND flash config */ 263 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 264 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 265 | BR_PS_8 /* Port Size = 8 bit */ \ 266 | BR_MS_FCM /* MSEL = FCM */ \ 267 | BR_V) /* valid */ 268 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 269 | OR_FCM_PGS /* Large Page*/ \ 270 | OR_FCM_CSCT \ 271 | OR_FCM_CST \ 272 | OR_FCM_CHT \ 273 | OR_FCM_SCY_1 \ 274 | OR_FCM_TRLX \ 275 | OR_FCM_EHTR) 276 277 #ifdef CONFIG_NAND 278 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 279 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 280 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 281 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 282 #else 283 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 284 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 285 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 286 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 287 #endif 288 #else 289 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 290 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 291 #endif /* CONFIG_NAND_FSL_ELBC */ 292 293 #define CONFIG_SYS_FLASH_EMPTY_INFO 294 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 295 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 296 297 #define CONFIG_BOARD_EARLY_INIT_F 298 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 299 #define CONFIG_MISC_INIT_R 300 301 #define CONFIG_HWCONFIG 302 303 /* define to use L1 as initial stack */ 304 #define CONFIG_L1_INIT_RAM 305 #define CONFIG_SYS_INIT_RAM_LOCK 306 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 307 #ifdef CONFIG_PHYS_64BIT 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 310 /* The assembler doesn't like typecast */ 311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 312 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 313 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 314 #else 315 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 317 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 318 #endif 319 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 320 321 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 322 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 323 324 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 325 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 326 327 /* Serial Port - controlled on board with jumper J8 328 * open - index 2 329 * shorted - index 1 330 */ 331 #define CONFIG_CONS_INDEX 1 332 #define CONFIG_SYS_NS16550_SERIAL 333 #define CONFIG_SYS_NS16550_REG_SIZE 1 334 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 335 336 #define CONFIG_SYS_BAUDRATE_TABLE \ 337 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 338 339 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 340 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 341 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 342 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 343 344 /* I2C */ 345 #define CONFIG_SYS_I2C 346 #define CONFIG_SYS_I2C_FSL 347 #define CONFIG_SYS_FSL_I2C_SPEED 400000 348 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 349 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 350 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 351 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 352 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 353 354 /* 355 * RapidIO 356 */ 357 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 358 #ifdef CONFIG_PHYS_64BIT 359 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 360 #else 361 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 362 #endif 363 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 364 365 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 366 #ifdef CONFIG_PHYS_64BIT 367 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 368 #else 369 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 370 #endif 371 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 372 373 /* 374 * for slave u-boot IMAGE instored in master memory space, 375 * PHYS must be aligned based on the SIZE 376 */ 377 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 378 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 379 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 380 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 381 /* 382 * for slave UCODE and ENV instored in master memory space, 383 * PHYS must be aligned based on the SIZE 384 */ 385 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 386 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 387 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 388 389 /* slave core release by master*/ 390 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 391 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 392 393 /* 394 * SRIO_PCIE_BOOT - SLAVE 395 */ 396 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 397 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 398 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 399 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 400 #endif 401 402 /* 403 * eSPI - Enhanced SPI 404 */ 405 #define CONFIG_SF_DEFAULT_SPEED 10000000 406 #define CONFIG_SF_DEFAULT_MODE 0 407 408 /* 409 * General PCI 410 * Memory space is mapped 1-1, but I/O space must start from 0. 411 */ 412 413 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 414 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 415 #ifdef CONFIG_PHYS_64BIT 416 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 417 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 418 #else 419 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 420 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 421 #endif 422 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 423 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 424 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 427 #else 428 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 429 #endif 430 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 431 432 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 433 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 434 #ifdef CONFIG_PHYS_64BIT 435 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 436 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 437 #else 438 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 439 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 440 #endif 441 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 442 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 443 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 444 #ifdef CONFIG_PHYS_64BIT 445 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 446 #else 447 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 448 #endif 449 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 450 451 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 452 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 453 #ifdef CONFIG_PHYS_64BIT 454 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 455 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 456 #else 457 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 458 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 459 #endif 460 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 461 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 462 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 463 #ifdef CONFIG_PHYS_64BIT 464 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 465 #else 466 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 467 #endif 468 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 469 470 /* controller 4, Base address 203000 */ 471 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 472 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 473 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 474 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 475 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 476 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 477 478 /* Qman/Bman */ 479 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 480 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 481 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 482 #ifdef CONFIG_PHYS_64BIT 483 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 484 #else 485 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 486 #endif 487 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 488 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 489 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 490 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 491 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 492 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 493 CONFIG_SYS_BMAN_CENA_SIZE) 494 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 495 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 496 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 497 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 498 #ifdef CONFIG_PHYS_64BIT 499 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 500 #else 501 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 502 #endif 503 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 504 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 505 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 506 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 507 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 508 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 509 CONFIG_SYS_QMAN_CENA_SIZE) 510 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 511 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 512 513 #define CONFIG_SYS_DPAA_FMAN 514 #define CONFIG_SYS_DPAA_PME 515 /* Default address of microcode for the Linux Fman driver */ 516 #if defined(CONFIG_SPIFLASH) 517 /* 518 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 519 * env, so we got 0x110000. 520 */ 521 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 522 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 523 #elif defined(CONFIG_SDCARD) 524 /* 525 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 526 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 527 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 528 */ 529 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 530 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 531 #elif defined(CONFIG_NAND) 532 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 533 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 534 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 535 /* 536 * Slave has no ucode locally, it can fetch this from remote. When implementing 537 * in two corenet boards, slave's ucode could be stored in master's memory 538 * space, the address can be mapped from slave TLB->slave LAW-> 539 * slave SRIO or PCIE outbound window->master inbound window-> 540 * master LAW->the ucode address in master's memory space. 541 */ 542 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 543 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 544 #else 545 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 546 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 547 #endif 548 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 549 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 550 551 #ifdef CONFIG_SYS_DPAA_FMAN 552 #define CONFIG_FMAN_ENET 553 #define CONFIG_PHYLIB_10G 554 #define CONFIG_PHY_VITESSE 555 #define CONFIG_PHY_TERANETICS 556 #endif 557 558 #ifdef CONFIG_PCI 559 #define CONFIG_PCI_INDIRECT_BRIDGE 560 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 561 562 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 563 #define CONFIG_DOS_PARTITION 564 #endif /* CONFIG_PCI */ 565 566 /* SATA */ 567 #ifdef CONFIG_FSL_SATA_V2 568 #define CONFIG_LIBATA 569 #define CONFIG_FSL_SATA 570 571 #define CONFIG_SYS_SATA_MAX_DEVICE 2 572 #define CONFIG_SATA1 573 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 574 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 575 #define CONFIG_SATA2 576 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 577 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 578 579 #define CONFIG_LBA48 580 #define CONFIG_CMD_SATA 581 #define CONFIG_DOS_PARTITION 582 #endif 583 584 #ifdef CONFIG_FMAN_ENET 585 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 586 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 587 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 588 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 589 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 590 591 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 592 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 593 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 594 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 595 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 596 597 #define CONFIG_SYS_TBIPA_VALUE 8 598 #define CONFIG_MII /* MII PHY management */ 599 #define CONFIG_ETHPRIME "FM1@DTSEC1" 600 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 601 #endif 602 603 /* 604 * Environment 605 */ 606 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 607 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 608 609 /* 610 * Command line configuration. 611 */ 612 #define CONFIG_CMD_ERRATA 613 #define CONFIG_CMD_IRQ 614 #define CONFIG_CMD_REGINFO 615 616 #ifdef CONFIG_PCI 617 #define CONFIG_CMD_PCI 618 #endif 619 620 /* 621 * USB 622 */ 623 #define CONFIG_HAS_FSL_DR_USB 624 #define CONFIG_HAS_FSL_MPH_USB 625 626 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 627 #define CONFIG_USB_STORAGE 628 #define CONFIG_USB_EHCI 629 #define CONFIG_USB_EHCI_FSL 630 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 631 #endif 632 633 #ifdef CONFIG_MMC 634 #define CONFIG_FSL_ESDHC 635 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 636 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 637 #define CONFIG_GENERIC_MMC 638 #define CONFIG_DOS_PARTITION 639 #endif 640 641 /* Hash command with SHA acceleration supported in hardware */ 642 #ifdef CONFIG_FSL_CAAM 643 #define CONFIG_CMD_HASH 644 #define CONFIG_SHA_HW_ACCEL 645 #endif 646 647 /* 648 * Miscellaneous configurable options 649 */ 650 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 651 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 652 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 653 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 654 #ifdef CONFIG_CMD_KGDB 655 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 656 #else 657 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 658 #endif 659 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 660 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 661 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 662 663 /* 664 * For booting Linux, the board info and command line data 665 * have to be in the first 64 MB of memory, since this is 666 * the maximum mapped by the Linux kernel during initialization. 667 */ 668 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 669 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 670 671 #ifdef CONFIG_CMD_KGDB 672 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 673 #endif 674 675 /* 676 * Environment Configuration 677 */ 678 #define CONFIG_ROOTPATH "/opt/nfsroot" 679 #define CONFIG_BOOTFILE "uImage" 680 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 681 682 /* default location for tftp and bootm */ 683 #define CONFIG_LOADADDR 1000000 684 685 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 686 687 #define CONFIG_BAUDRATE 115200 688 689 #ifdef CONFIG_P4080DS 690 #define __USB_PHY_TYPE ulpi 691 #else 692 #define __USB_PHY_TYPE utmi 693 #endif 694 695 #define CONFIG_EXTRA_ENV_SETTINGS \ 696 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 697 "bank_intlv=cs0_cs1;" \ 698 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 699 "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 700 "netdev=eth0\0" \ 701 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 702 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 703 "tftpflash=tftpboot $loadaddr $uboot && " \ 704 "protect off $ubootaddr +$filesize && " \ 705 "erase $ubootaddr +$filesize && " \ 706 "cp.b $loadaddr $ubootaddr $filesize && " \ 707 "protect on $ubootaddr +$filesize && " \ 708 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 709 "consoledev=ttyS0\0" \ 710 "ramdiskaddr=2000000\0" \ 711 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 712 "fdtaddr=c00000\0" \ 713 "fdtfile=p4080ds/p4080ds.dtb\0" \ 714 "bdev=sda3\0" 715 716 #define CONFIG_HDBOOT \ 717 "setenv bootargs root=/dev/$bdev rw " \ 718 "console=$consoledev,$baudrate $othbootargs;" \ 719 "tftp $loadaddr $bootfile;" \ 720 "tftp $fdtaddr $fdtfile;" \ 721 "bootm $loadaddr - $fdtaddr" 722 723 #define CONFIG_NFSBOOTCOMMAND \ 724 "setenv bootargs root=/dev/nfs rw " \ 725 "nfsroot=$serverip:$rootpath " \ 726 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 727 "console=$consoledev,$baudrate $othbootargs;" \ 728 "tftp $loadaddr $bootfile;" \ 729 "tftp $fdtaddr $fdtfile;" \ 730 "bootm $loadaddr - $fdtaddr" 731 732 #define CONFIG_RAMBOOTCOMMAND \ 733 "setenv bootargs root=/dev/ram rw " \ 734 "console=$consoledev,$baudrate $othbootargs;" \ 735 "tftp $ramdiskaddr $ramdiskfile;" \ 736 "tftp $loadaddr $bootfile;" \ 737 "tftp $fdtaddr $fdtfile;" \ 738 "bootm $loadaddr $ramdiskaddr $fdtaddr" 739 740 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 741 742 #include <asm/fsl_secure_boot.h> 743 744 #endif /* __CONFIG_H */ 745