1 /* 2 * Copyright 2009-2012 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #include "../board/freescale/common/ics307_clk.h" 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 34 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg 35 #if defined(CONFIG_P3041DS) 36 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg 37 #elif defined(CONFIG_P4080DS) 38 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg 39 #elif defined(CONFIG_P5020DS) 40 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg 41 #endif 42 #endif 43 44 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 45 /* Set 1M boot space */ 46 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 47 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 48 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 49 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 50 #define CONFIG_SYS_NO_FLASH 51 #endif 52 53 /* High Level Configuration Options */ 54 #define CONFIG_BOOKE 55 #define CONFIG_E500 /* BOOKE e500 family */ 56 #define CONFIG_E500MC /* BOOKE e500mc family */ 57 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 58 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 59 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 60 #define CONFIG_MP /* support multiple processors */ 61 62 #ifndef CONFIG_SYS_TEXT_BASE 63 #define CONFIG_SYS_TEXT_BASE 0xeff80000 64 #endif 65 66 #ifndef CONFIG_RESET_VECTOR_ADDRESS 67 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 68 #endif 69 70 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 71 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 72 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 73 #define CONFIG_PCI /* Enable PCI/PCIE */ 74 #define CONFIG_PCIE1 /* PCIE controler 1 */ 75 #define CONFIG_PCIE2 /* PCIE controler 2 */ 76 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 77 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 78 79 #define CONFIG_FSL_LAW /* Use common FSL init code */ 80 81 #define CONFIG_ENV_OVERWRITE 82 83 #ifdef CONFIG_SYS_NO_FLASH 84 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 85 #define CONFIG_ENV_IS_NOWHERE 86 #endif 87 #else 88 #define CONFIG_FLASH_CFI_DRIVER 89 #define CONFIG_SYS_FLASH_CFI 90 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 91 #endif 92 93 #if defined(CONFIG_SPIFLASH) 94 #define CONFIG_SYS_EXTRA_ENV_RELOC 95 #define CONFIG_ENV_IS_IN_SPI_FLASH 96 #define CONFIG_ENV_SPI_BUS 0 97 #define CONFIG_ENV_SPI_CS 0 98 #define CONFIG_ENV_SPI_MAX_HZ 10000000 99 #define CONFIG_ENV_SPI_MODE 0 100 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 101 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 102 #define CONFIG_ENV_SECT_SIZE 0x10000 103 #elif defined(CONFIG_SDCARD) 104 #define CONFIG_SYS_EXTRA_ENV_RELOC 105 #define CONFIG_ENV_IS_IN_MMC 106 #define CONFIG_FSL_FIXED_MMC_LOCATION 107 #define CONFIG_SYS_MMC_ENV_DEV 0 108 #define CONFIG_ENV_SIZE 0x2000 109 #define CONFIG_ENV_OFFSET (512 * 1097) 110 #elif defined(CONFIG_NAND) 111 #define CONFIG_SYS_EXTRA_ENV_RELOC 112 #define CONFIG_ENV_IS_IN_NAND 113 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 114 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 115 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 116 #define CONFIG_ENV_IS_IN_REMOTE 117 #define CONFIG_ENV_ADDR 0xffe20000 118 #define CONFIG_ENV_SIZE 0x2000 119 #elif defined(CONFIG_ENV_IS_NOWHERE) 120 #define CONFIG_ENV_SIZE 0x2000 121 #else 122 #define CONFIG_ENV_IS_IN_FLASH 123 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 124 #define CONFIG_ENV_SIZE 0x2000 125 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 126 #endif 127 128 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 129 130 /* 131 * These can be toggled for performance analysis, otherwise use default. 132 */ 133 #define CONFIG_SYS_CACHE_STASHING 134 #define CONFIG_BACKSIDE_L2_CACHE 135 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 136 #define CONFIG_BTB /* toggle branch predition */ 137 #define CONFIG_DDR_ECC 138 #ifdef CONFIG_DDR_ECC 139 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 140 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 141 #endif 142 143 #define CONFIG_ENABLE_36BIT_PHYS 144 145 #ifdef CONFIG_PHYS_64BIT 146 #define CONFIG_ADDR_MAP 147 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 148 #endif 149 150 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 151 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 152 #define CONFIG_SYS_MEMTEST_END 0x00400000 153 #define CONFIG_SYS_ALT_MEMTEST 154 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 155 156 /* 157 * Config the L3 Cache as L3 SRAM 158 */ 159 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 160 #ifdef CONFIG_PHYS_64BIT 161 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 162 #else 163 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 164 #endif 165 #define CONFIG_SYS_L3_SIZE (1024 << 10) 166 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 167 168 #ifdef CONFIG_PHYS_64BIT 169 #define CONFIG_SYS_DCSRBAR 0xf0000000 170 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 171 #endif 172 173 /* EEPROM */ 174 #define CONFIG_ID_EEPROM 175 #define CONFIG_SYS_I2C_EEPROM_NXID 176 #define CONFIG_SYS_EEPROM_BUS_NUM 0 177 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 178 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 179 180 /* 181 * DDR Setup 182 */ 183 #define CONFIG_VERY_BIG_RAM 184 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 185 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 186 187 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 188 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 189 190 #define CONFIG_DDR_SPD 191 #define CONFIG_FSL_DDR3 192 193 #define CONFIG_SYS_SPD_BUS_NUM 1 194 #define SPD_EEPROM_ADDRESS1 0x51 195 #define SPD_EEPROM_ADDRESS2 0x52 196 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 197 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 198 199 /* 200 * Local Bus Definitions 201 */ 202 203 /* Set the local bus clock 1/8 of platform clock */ 204 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 205 206 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 207 #ifdef CONFIG_PHYS_64BIT 208 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 209 #else 210 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 211 #endif 212 213 #define CONFIG_SYS_FLASH_BR_PRELIM \ 214 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \ 215 | BR_PS_16 | BR_V) 216 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 217 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 218 219 #define CONFIG_SYS_BR1_PRELIM \ 220 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 221 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 222 223 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 224 #ifdef CONFIG_PHYS_64BIT 225 #define PIXIS_BASE_PHYS 0xfffdf0000ull 226 #else 227 #define PIXIS_BASE_PHYS PIXIS_BASE 228 #endif 229 230 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 231 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 232 233 #define PIXIS_LBMAP_SWITCH 7 234 #define PIXIS_LBMAP_MASK 0xf0 235 #define PIXIS_LBMAP_SHIFT 4 236 #define PIXIS_LBMAP_ALTBANK 0x40 237 238 #define CONFIG_SYS_FLASH_QUIET_TEST 239 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 240 241 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 242 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 243 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 244 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 245 246 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 247 248 #if defined(CONFIG_RAMBOOT_PBL) 249 #define CONFIG_SYS_RAMBOOT 250 #endif 251 252 /* Nand Flash */ 253 #ifdef CONFIG_NAND_FSL_ELBC 254 #define CONFIG_SYS_NAND_BASE 0xffa00000 255 #ifdef CONFIG_PHYS_64BIT 256 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 257 #else 258 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 259 #endif 260 261 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 262 #define CONFIG_SYS_MAX_NAND_DEVICE 1 263 #define CONFIG_MTD_NAND_VERIFY_WRITE 264 #define CONFIG_CMD_NAND 265 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 266 267 /* NAND flash config */ 268 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 269 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 270 | BR_PS_8 /* Port Size = 8 bit */ \ 271 | BR_MS_FCM /* MSEL = FCM */ \ 272 | BR_V) /* valid */ 273 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 274 | OR_FCM_PGS /* Large Page*/ \ 275 | OR_FCM_CSCT \ 276 | OR_FCM_CST \ 277 | OR_FCM_CHT \ 278 | OR_FCM_SCY_1 \ 279 | OR_FCM_TRLX \ 280 | OR_FCM_EHTR) 281 282 #ifdef CONFIG_NAND 283 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 284 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 285 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 286 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 287 #else 288 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 289 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 290 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 291 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 292 #endif 293 #else 294 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 295 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 296 #endif /* CONFIG_NAND_FSL_ELBC */ 297 298 #define CONFIG_SYS_FLASH_EMPTY_INFO 299 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 300 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 301 302 #define CONFIG_BOARD_EARLY_INIT_F 303 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 304 #define CONFIG_MISC_INIT_R 305 306 #define CONFIG_HWCONFIG 307 308 /* define to use L1 as initial stack */ 309 #define CONFIG_L1_INIT_RAM 310 #define CONFIG_SYS_INIT_RAM_LOCK 311 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 312 #ifdef CONFIG_PHYS_64BIT 313 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 314 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 315 /* The assembler doesn't like typecast */ 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 317 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 318 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 319 #else 320 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 321 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 322 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 323 #endif 324 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 325 326 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 327 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 328 329 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 330 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 331 332 /* Serial Port - controlled on board with jumper J8 333 * open - index 2 334 * shorted - index 1 335 */ 336 #define CONFIG_CONS_INDEX 1 337 #define CONFIG_SYS_NS16550 338 #define CONFIG_SYS_NS16550_SERIAL 339 #define CONFIG_SYS_NS16550_REG_SIZE 1 340 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 341 342 #define CONFIG_SYS_BAUDRATE_TABLE \ 343 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 344 345 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 346 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 347 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 348 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 349 350 /* Use the HUSH parser */ 351 #define CONFIG_SYS_HUSH_PARSER 352 353 /* pass open firmware flat tree */ 354 #define CONFIG_OF_LIBFDT 355 #define CONFIG_OF_BOARD_SETUP 356 #define CONFIG_OF_STDOUT_VIA_ALIAS 357 358 /* new uImage format support */ 359 #define CONFIG_FIT 360 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 361 362 /* I2C */ 363 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 364 #define CONFIG_HARD_I2C /* I2C with hardware support */ 365 #define CONFIG_I2C_MULTI_BUS 366 #define CONFIG_I2C_CMD_TREE 367 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 368 #define CONFIG_SYS_I2C_SLAVE 0x7F 369 #define CONFIG_SYS_I2C_OFFSET 0x118000 370 #define CONFIG_SYS_I2C2_OFFSET 0x118100 371 372 /* 373 * RapidIO 374 */ 375 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 376 #ifdef CONFIG_PHYS_64BIT 377 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 378 #else 379 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 380 #endif 381 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 382 383 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 384 #ifdef CONFIG_PHYS_64BIT 385 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 386 #else 387 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 388 #endif 389 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 390 391 /* 392 * for slave u-boot IMAGE instored in master memory space, 393 * PHYS must be aligned based on the SIZE 394 */ 395 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull 396 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull 397 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ 398 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull 399 /* 400 * for slave UCODE and ENV instored in master memory space, 401 * PHYS must be aligned based on the SIZE 402 */ 403 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull 404 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 405 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 406 407 /* slave core release by master*/ 408 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 409 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 410 411 /* 412 * SRIO_PCIE_BOOT - SLAVE 413 */ 414 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 415 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 416 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 417 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 418 #endif 419 420 /* 421 * eSPI - Enhanced SPI 422 */ 423 #define CONFIG_FSL_ESPI 424 #define CONFIG_SPI_FLASH 425 #define CONFIG_SPI_FLASH_SPANSION 426 #define CONFIG_CMD_SF 427 #define CONFIG_SF_DEFAULT_SPEED 10000000 428 #define CONFIG_SF_DEFAULT_MODE 0 429 430 /* 431 * General PCI 432 * Memory space is mapped 1-1, but I/O space must start from 0. 433 */ 434 435 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 436 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 437 #ifdef CONFIG_PHYS_64BIT 438 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 439 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 440 #else 441 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 442 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 443 #endif 444 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 445 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 446 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 447 #ifdef CONFIG_PHYS_64BIT 448 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 449 #else 450 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 451 #endif 452 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 453 454 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 455 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 456 #ifdef CONFIG_PHYS_64BIT 457 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 458 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 459 #else 460 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 461 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 462 #endif 463 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 464 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 465 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 466 #ifdef CONFIG_PHYS_64BIT 467 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 468 #else 469 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 470 #endif 471 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 472 473 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 474 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 475 #ifdef CONFIG_PHYS_64BIT 476 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 477 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 478 #else 479 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 480 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 481 #endif 482 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 483 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 484 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 485 #ifdef CONFIG_PHYS_64BIT 486 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 487 #else 488 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 489 #endif 490 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 491 492 /* controller 4, Base address 203000 */ 493 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 494 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 495 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 496 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 497 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 498 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 499 500 /* Qman/Bman */ 501 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 502 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 503 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 504 #ifdef CONFIG_PHYS_64BIT 505 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 506 #else 507 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 508 #endif 509 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 510 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 511 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 512 #ifdef CONFIG_PHYS_64BIT 513 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 514 #else 515 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 516 #endif 517 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 518 519 #define CONFIG_SYS_DPAA_FMAN 520 #define CONFIG_SYS_DPAA_PME 521 /* Default address of microcode for the Linux Fman driver */ 522 #if defined(CONFIG_SPIFLASH) 523 /* 524 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 525 * env, so we got 0x110000. 526 */ 527 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 528 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 529 #elif defined(CONFIG_SDCARD) 530 /* 531 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 532 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 533 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 534 */ 535 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 536 #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) 537 #elif defined(CONFIG_NAND) 538 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 539 #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 540 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 541 /* 542 * Slave has no ucode locally, it can fetch this from remote. When implementing 543 * in two corenet boards, slave's ucode could be stored in master's memory 544 * space, the address can be mapped from slave TLB->slave LAW-> 545 * slave SRIO or PCIE outbound window->master inbound window-> 546 * master LAW->the ucode address in master's memory space. 547 */ 548 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 549 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 550 #else 551 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 552 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 553 #endif 554 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 555 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 556 557 #ifdef CONFIG_SYS_DPAA_FMAN 558 #define CONFIG_FMAN_ENET 559 #define CONFIG_PHYLIB_10G 560 #define CONFIG_PHY_VITESSE 561 #define CONFIG_PHY_TERANETICS 562 #endif 563 564 #ifdef CONFIG_PCI 565 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 566 #define CONFIG_E1000 567 568 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 569 #define CONFIG_DOS_PARTITION 570 #endif /* CONFIG_PCI */ 571 572 /* SATA */ 573 #ifdef CONFIG_FSL_SATA_V2 574 #define CONFIG_LIBATA 575 #define CONFIG_FSL_SATA 576 577 #define CONFIG_SYS_SATA_MAX_DEVICE 2 578 #define CONFIG_SATA1 579 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 580 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 581 #define CONFIG_SATA2 582 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 583 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 584 585 #define CONFIG_LBA48 586 #define CONFIG_CMD_SATA 587 #define CONFIG_DOS_PARTITION 588 #define CONFIG_CMD_EXT2 589 #endif 590 591 #ifdef CONFIG_FMAN_ENET 592 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 593 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 594 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 595 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 596 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 597 598 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 599 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 600 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 601 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 602 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 603 604 #define CONFIG_SYS_TBIPA_VALUE 8 605 #define CONFIG_MII /* MII PHY management */ 606 #define CONFIG_ETHPRIME "FM1@DTSEC1" 607 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 608 #endif 609 610 /* 611 * Environment 612 */ 613 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 614 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 615 616 /* 617 * Command line configuration. 618 */ 619 #include <config_cmd_default.h> 620 621 #define CONFIG_CMD_DHCP 622 #define CONFIG_CMD_ELF 623 #define CONFIG_CMD_ERRATA 624 #define CONFIG_CMD_GREPENV 625 #define CONFIG_CMD_IRQ 626 #define CONFIG_CMD_I2C 627 #define CONFIG_CMD_MII 628 #define CONFIG_CMD_PING 629 #define CONFIG_CMD_SETEXPR 630 #define CONFIG_CMD_REGINFO 631 632 #ifdef CONFIG_PCI 633 #define CONFIG_CMD_PCI 634 #define CONFIG_CMD_NET 635 #endif 636 637 /* 638 * USB 639 */ 640 #define CONFIG_HAS_FSL_DR_USB 641 #define CONFIG_HAS_FSL_MPH_USB 642 643 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 644 #define CONFIG_CMD_USB 645 #define CONFIG_USB_STORAGE 646 #define CONFIG_USB_EHCI 647 #define CONFIG_USB_EHCI_FSL 648 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 649 #define CONFIG_CMD_EXT2 650 #endif 651 652 #ifdef CONFIG_MMC 653 #define CONFIG_FSL_ESDHC 654 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 655 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 656 #define CONFIG_CMD_MMC 657 #define CONFIG_GENERIC_MMC 658 #define CONFIG_CMD_EXT2 659 #define CONFIG_CMD_FAT 660 #define CONFIG_DOS_PARTITION 661 #endif 662 663 /* 664 * Miscellaneous configurable options 665 */ 666 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 667 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 668 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 669 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 670 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 671 #ifdef CONFIG_CMD_KGDB 672 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 673 #else 674 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 675 #endif 676 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 677 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 678 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 679 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 680 681 /* 682 * For booting Linux, the board info and command line data 683 * have to be in the first 64 MB of memory, since this is 684 * the maximum mapped by the Linux kernel during initialization. 685 */ 686 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 687 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 688 689 #ifdef CONFIG_CMD_KGDB 690 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 691 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 692 #endif 693 694 /* 695 * Environment Configuration 696 */ 697 #define CONFIG_ROOTPATH "/opt/nfsroot" 698 #define CONFIG_BOOTFILE "uImage" 699 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 700 701 /* default location for tftp and bootm */ 702 #define CONFIG_LOADADDR 1000000 703 704 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 705 706 #define CONFIG_BAUDRATE 115200 707 708 #ifdef CONFIG_P4080DS 709 #define __USB_PHY_TYPE ulpi 710 #else 711 #define __USB_PHY_TYPE utmi 712 #endif 713 714 #define CONFIG_EXTRA_ENV_SETTINGS \ 715 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 716 "bank_intlv=cs0_cs1;" \ 717 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 718 "netdev=eth0\0" \ 719 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 720 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 721 "tftpflash=tftpboot $loadaddr $uboot && " \ 722 "protect off $ubootaddr +$filesize && " \ 723 "erase $ubootaddr +$filesize && " \ 724 "cp.b $loadaddr $ubootaddr $filesize && " \ 725 "protect on $ubootaddr +$filesize && " \ 726 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 727 "consoledev=ttyS0\0" \ 728 "ramdiskaddr=2000000\0" \ 729 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 730 "fdtaddr=c00000\0" \ 731 "fdtfile=p4080ds/p4080ds.dtb\0" \ 732 "bdev=sda3\0" \ 733 "c=ffe\0" 734 735 #define CONFIG_HDBOOT \ 736 "setenv bootargs root=/dev/$bdev rw " \ 737 "console=$consoledev,$baudrate $othbootargs;" \ 738 "tftp $loadaddr $bootfile;" \ 739 "tftp $fdtaddr $fdtfile;" \ 740 "bootm $loadaddr - $fdtaddr" 741 742 #define CONFIG_NFSBOOTCOMMAND \ 743 "setenv bootargs root=/dev/nfs rw " \ 744 "nfsroot=$serverip:$rootpath " \ 745 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 746 "console=$consoledev,$baudrate $othbootargs;" \ 747 "tftp $loadaddr $bootfile;" \ 748 "tftp $fdtaddr $fdtfile;" \ 749 "bootm $loadaddr - $fdtaddr" 750 751 #define CONFIG_RAMBOOTCOMMAND \ 752 "setenv bootargs root=/dev/ram rw " \ 753 "console=$consoledev,$baudrate $othbootargs;" \ 754 "tftp $ramdiskaddr $ramdiskfile;" \ 755 "tftp $loadaddr $bootfile;" \ 756 "tftp $fdtaddr $fdtfile;" \ 757 "bootm $loadaddr $ramdiskaddr $fdtaddr" 758 759 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 760 761 #ifdef CONFIG_SECURE_BOOT 762 #include <asm/fsl_secure_boot.h> 763 #endif 764 765 #endif /* __CONFIG_H */ 766