1 /* 2 * Copyright 2009-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Corenet DS style board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_SYS_GENERIC_BOARD 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #include "../board/freescale/common/ics307_clk.h" 17 18 #ifdef CONFIG_RAMBOOT_PBL 19 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 20 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 21 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg 22 #if defined(CONFIG_P3041DS) 23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg 24 #elif defined(CONFIG_P4080DS) 25 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg 26 #elif defined(CONFIG_P5020DS) 27 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg 28 #elif defined(CONFIG_P5040DS) 29 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg 30 #endif 31 #endif 32 33 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 34 /* Set 1M boot space */ 35 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 36 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 37 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 38 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 39 #define CONFIG_SYS_NO_FLASH 40 #endif 41 42 /* High Level Configuration Options */ 43 #define CONFIG_BOOKE 44 #define CONFIG_E500 /* BOOKE e500 family */ 45 #define CONFIG_E500MC /* BOOKE e500mc family */ 46 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 47 #define CONFIG_MP /* support multiple processors */ 48 49 #ifndef CONFIG_SYS_TEXT_BASE 50 #define CONFIG_SYS_TEXT_BASE 0xeff40000 51 #endif 52 53 #ifndef CONFIG_RESET_VECTOR_ADDRESS 54 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 55 #endif 56 57 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 58 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 59 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 60 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 61 #define CONFIG_PCI /* Enable PCI/PCIE */ 62 #define CONFIG_PCIE1 /* PCIE controler 1 */ 63 #define CONFIG_PCIE2 /* PCIE controler 2 */ 64 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 65 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 66 67 #define CONFIG_FSL_LAW /* Use common FSL init code */ 68 69 #define CONFIG_ENV_OVERWRITE 70 71 #ifdef CONFIG_SYS_NO_FLASH 72 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 73 #define CONFIG_ENV_IS_NOWHERE 74 #endif 75 #else 76 #define CONFIG_FLASH_CFI_DRIVER 77 #define CONFIG_SYS_FLASH_CFI 78 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 79 #endif 80 81 #if defined(CONFIG_SPIFLASH) 82 #define CONFIG_SYS_EXTRA_ENV_RELOC 83 #define CONFIG_ENV_IS_IN_SPI_FLASH 84 #define CONFIG_ENV_SPI_BUS 0 85 #define CONFIG_ENV_SPI_CS 0 86 #define CONFIG_ENV_SPI_MAX_HZ 10000000 87 #define CONFIG_ENV_SPI_MODE 0 88 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 89 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 90 #define CONFIG_ENV_SECT_SIZE 0x10000 91 #elif defined(CONFIG_SDCARD) 92 #define CONFIG_SYS_EXTRA_ENV_RELOC 93 #define CONFIG_ENV_IS_IN_MMC 94 #define CONFIG_FSL_FIXED_MMC_LOCATION 95 #define CONFIG_SYS_MMC_ENV_DEV 0 96 #define CONFIG_ENV_SIZE 0x2000 97 #define CONFIG_ENV_OFFSET (512 * 1658) 98 #elif defined(CONFIG_NAND) 99 #define CONFIG_SYS_EXTRA_ENV_RELOC 100 #define CONFIG_ENV_IS_IN_NAND 101 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 102 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 103 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 104 #define CONFIG_ENV_IS_IN_REMOTE 105 #define CONFIG_ENV_ADDR 0xffe20000 106 #define CONFIG_ENV_SIZE 0x2000 107 #elif defined(CONFIG_ENV_IS_NOWHERE) 108 #define CONFIG_ENV_SIZE 0x2000 109 #else 110 #define CONFIG_ENV_IS_IN_FLASH 111 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 112 #define CONFIG_ENV_SIZE 0x2000 113 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 114 #endif 115 116 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 117 118 /* 119 * These can be toggled for performance analysis, otherwise use default. 120 */ 121 #define CONFIG_SYS_CACHE_STASHING 122 #define CONFIG_BACKSIDE_L2_CACHE 123 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 124 #define CONFIG_BTB /* toggle branch predition */ 125 #define CONFIG_DDR_ECC 126 #ifdef CONFIG_DDR_ECC 127 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 128 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 129 #endif 130 131 #define CONFIG_ENABLE_36BIT_PHYS 132 133 #ifdef CONFIG_PHYS_64BIT 134 #define CONFIG_ADDR_MAP 135 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 136 #endif 137 138 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 139 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 140 #define CONFIG_SYS_MEMTEST_END 0x00400000 141 #define CONFIG_SYS_ALT_MEMTEST 142 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 143 144 /* 145 * Config the L3 Cache as L3 SRAM 146 */ 147 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 148 #ifdef CONFIG_PHYS_64BIT 149 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 150 #else 151 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 152 #endif 153 #define CONFIG_SYS_L3_SIZE (1024 << 10) 154 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 155 156 #ifdef CONFIG_PHYS_64BIT 157 #define CONFIG_SYS_DCSRBAR 0xf0000000 158 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 159 #endif 160 161 /* EEPROM */ 162 #define CONFIG_ID_EEPROM 163 #define CONFIG_SYS_I2C_EEPROM_NXID 164 #define CONFIG_SYS_EEPROM_BUS_NUM 0 165 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 166 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 167 168 /* 169 * DDR Setup 170 */ 171 #define CONFIG_VERY_BIG_RAM 172 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 173 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 174 175 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 176 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 177 178 #define CONFIG_DDR_SPD 179 #define CONFIG_SYS_FSL_DDR3 180 181 #define CONFIG_SYS_SPD_BUS_NUM 1 182 #define SPD_EEPROM_ADDRESS1 0x51 183 #define SPD_EEPROM_ADDRESS2 0x52 184 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 185 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 186 187 /* 188 * Local Bus Definitions 189 */ 190 191 /* Set the local bus clock 1/8 of platform clock */ 192 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 193 194 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 195 #ifdef CONFIG_PHYS_64BIT 196 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 197 #else 198 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 199 #endif 200 201 #define CONFIG_SYS_FLASH_BR_PRELIM \ 202 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \ 203 | BR_PS_16 | BR_V) 204 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 205 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 206 207 #define CONFIG_SYS_BR1_PRELIM \ 208 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 209 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 210 211 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 212 #ifdef CONFIG_PHYS_64BIT 213 #define PIXIS_BASE_PHYS 0xfffdf0000ull 214 #else 215 #define PIXIS_BASE_PHYS PIXIS_BASE 216 #endif 217 218 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 219 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 220 221 #define PIXIS_LBMAP_SWITCH 7 222 #define PIXIS_LBMAP_MASK 0xf0 223 #define PIXIS_LBMAP_SHIFT 4 224 #define PIXIS_LBMAP_ALTBANK 0x40 225 226 #define CONFIG_SYS_FLASH_QUIET_TEST 227 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 228 229 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 230 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 231 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 232 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 233 234 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 235 236 #if defined(CONFIG_RAMBOOT_PBL) 237 #define CONFIG_SYS_RAMBOOT 238 #endif 239 240 /* Nand Flash */ 241 #ifdef CONFIG_NAND_FSL_ELBC 242 #define CONFIG_SYS_NAND_BASE 0xffa00000 243 #ifdef CONFIG_PHYS_64BIT 244 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 245 #else 246 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 247 #endif 248 249 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 250 #define CONFIG_SYS_MAX_NAND_DEVICE 1 251 #define CONFIG_MTD_NAND_VERIFY_WRITE 252 #define CONFIG_CMD_NAND 253 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 254 255 /* NAND flash config */ 256 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 257 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 258 | BR_PS_8 /* Port Size = 8 bit */ \ 259 | BR_MS_FCM /* MSEL = FCM */ \ 260 | BR_V) /* valid */ 261 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 262 | OR_FCM_PGS /* Large Page*/ \ 263 | OR_FCM_CSCT \ 264 | OR_FCM_CST \ 265 | OR_FCM_CHT \ 266 | OR_FCM_SCY_1 \ 267 | OR_FCM_TRLX \ 268 | OR_FCM_EHTR) 269 270 #ifdef CONFIG_NAND 271 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 272 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 273 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 274 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 275 #else 276 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 277 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 278 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 279 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 280 #endif 281 #else 282 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 283 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 284 #endif /* CONFIG_NAND_FSL_ELBC */ 285 286 #define CONFIG_SYS_FLASH_EMPTY_INFO 287 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 288 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 289 290 #define CONFIG_BOARD_EARLY_INIT_F 291 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 292 #define CONFIG_MISC_INIT_R 293 294 #define CONFIG_HWCONFIG 295 296 /* define to use L1 as initial stack */ 297 #define CONFIG_L1_INIT_RAM 298 #define CONFIG_SYS_INIT_RAM_LOCK 299 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 300 #ifdef CONFIG_PHYS_64BIT 301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 303 /* The assembler doesn't like typecast */ 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 305 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 306 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 307 #else 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 311 #endif 312 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 313 314 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 315 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 316 317 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 318 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 319 320 /* Serial Port - controlled on board with jumper J8 321 * open - index 2 322 * shorted - index 1 323 */ 324 #define CONFIG_CONS_INDEX 1 325 #define CONFIG_SYS_NS16550 326 #define CONFIG_SYS_NS16550_SERIAL 327 #define CONFIG_SYS_NS16550_REG_SIZE 1 328 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 329 330 #define CONFIG_SYS_BAUDRATE_TABLE \ 331 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 332 333 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 334 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 335 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 336 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 337 338 /* Use the HUSH parser */ 339 #define CONFIG_SYS_HUSH_PARSER 340 341 /* pass open firmware flat tree */ 342 #define CONFIG_OF_LIBFDT 343 #define CONFIG_OF_BOARD_SETUP 344 #define CONFIG_OF_STDOUT_VIA_ALIAS 345 346 /* new uImage format support */ 347 #define CONFIG_FIT 348 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 349 350 /* I2C */ 351 #define CONFIG_SYS_I2C 352 #define CONFIG_SYS_I2C_FSL 353 #define CONFIG_SYS_FSL_I2C_SPEED 400000 354 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 355 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 356 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 357 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 358 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 359 360 /* 361 * RapidIO 362 */ 363 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 364 #ifdef CONFIG_PHYS_64BIT 365 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 366 #else 367 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 368 #endif 369 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 370 371 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 372 #ifdef CONFIG_PHYS_64BIT 373 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 374 #else 375 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 376 #endif 377 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 378 379 /* 380 * for slave u-boot IMAGE instored in master memory space, 381 * PHYS must be aligned based on the SIZE 382 */ 383 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 384 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 385 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 387 /* 388 * for slave UCODE and ENV instored in master memory space, 389 * PHYS must be aligned based on the SIZE 390 */ 391 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 392 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 393 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 394 395 /* slave core release by master*/ 396 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 397 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 398 399 /* 400 * SRIO_PCIE_BOOT - SLAVE 401 */ 402 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 403 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 404 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 405 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 406 #endif 407 408 /* 409 * eSPI - Enhanced SPI 410 */ 411 #define CONFIG_FSL_ESPI 412 #define CONFIG_SPI_FLASH 413 #define CONFIG_SPI_FLASH_SPANSION 414 #define CONFIG_CMD_SF 415 #define CONFIG_SF_DEFAULT_SPEED 10000000 416 #define CONFIG_SF_DEFAULT_MODE 0 417 418 /* 419 * General PCI 420 * Memory space is mapped 1-1, but I/O space must start from 0. 421 */ 422 423 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 424 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 427 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 428 #else 429 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 430 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 431 #endif 432 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 433 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 434 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 435 #ifdef CONFIG_PHYS_64BIT 436 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 437 #else 438 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 439 #endif 440 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 441 442 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 443 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 444 #ifdef CONFIG_PHYS_64BIT 445 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 446 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 447 #else 448 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 449 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 450 #endif 451 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 452 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 453 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 454 #ifdef CONFIG_PHYS_64BIT 455 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 456 #else 457 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 458 #endif 459 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 460 461 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 462 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 463 #ifdef CONFIG_PHYS_64BIT 464 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 465 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 466 #else 467 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 468 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 469 #endif 470 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 471 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 472 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 473 #ifdef CONFIG_PHYS_64BIT 474 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 475 #else 476 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 477 #endif 478 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 479 480 /* controller 4, Base address 203000 */ 481 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 482 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 483 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 484 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 485 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 486 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 487 488 /* Qman/Bman */ 489 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 490 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 491 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 492 #ifdef CONFIG_PHYS_64BIT 493 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 494 #else 495 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 496 #endif 497 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 498 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 499 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 500 #ifdef CONFIG_PHYS_64BIT 501 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 502 #else 503 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 504 #endif 505 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 506 507 #define CONFIG_SYS_DPAA_FMAN 508 #define CONFIG_SYS_DPAA_PME 509 /* Default address of microcode for the Linux Fman driver */ 510 #if defined(CONFIG_SPIFLASH) 511 /* 512 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 513 * env, so we got 0x110000. 514 */ 515 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 516 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 517 #elif defined(CONFIG_SDCARD) 518 /* 519 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 520 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 521 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 522 */ 523 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 524 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 525 #elif defined(CONFIG_NAND) 526 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 527 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 528 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 529 /* 530 * Slave has no ucode locally, it can fetch this from remote. When implementing 531 * in two corenet boards, slave's ucode could be stored in master's memory 532 * space, the address can be mapped from slave TLB->slave LAW-> 533 * slave SRIO or PCIE outbound window->master inbound window-> 534 * master LAW->the ucode address in master's memory space. 535 */ 536 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 537 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 538 #else 539 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 540 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 541 #endif 542 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 543 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 544 545 #ifdef CONFIG_SYS_DPAA_FMAN 546 #define CONFIG_FMAN_ENET 547 #define CONFIG_PHYLIB_10G 548 #define CONFIG_PHY_VITESSE 549 #define CONFIG_PHY_TERANETICS 550 #endif 551 552 #ifdef CONFIG_PCI 553 #define CONFIG_PCI_INDIRECT_BRIDGE 554 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 555 #define CONFIG_E1000 556 557 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 558 #define CONFIG_DOS_PARTITION 559 #endif /* CONFIG_PCI */ 560 561 /* SATA */ 562 #ifdef CONFIG_FSL_SATA_V2 563 #define CONFIG_LIBATA 564 #define CONFIG_FSL_SATA 565 566 #define CONFIG_SYS_SATA_MAX_DEVICE 2 567 #define CONFIG_SATA1 568 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 569 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 570 #define CONFIG_SATA2 571 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 572 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 573 574 #define CONFIG_LBA48 575 #define CONFIG_CMD_SATA 576 #define CONFIG_DOS_PARTITION 577 #define CONFIG_CMD_EXT2 578 #endif 579 580 #ifdef CONFIG_FMAN_ENET 581 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 582 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 583 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 584 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 585 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 586 587 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 588 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 589 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 590 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 591 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 592 593 #define CONFIG_SYS_TBIPA_VALUE 8 594 #define CONFIG_MII /* MII PHY management */ 595 #define CONFIG_ETHPRIME "FM1@DTSEC1" 596 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 597 #endif 598 599 /* 600 * Environment 601 */ 602 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 603 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 604 605 /* 606 * Command line configuration. 607 */ 608 #include <config_cmd_default.h> 609 610 #define CONFIG_CMD_DHCP 611 #define CONFIG_CMD_ELF 612 #define CONFIG_CMD_ERRATA 613 #define CONFIG_CMD_GREPENV 614 #define CONFIG_CMD_IRQ 615 #define CONFIG_CMD_I2C 616 #define CONFIG_CMD_MII 617 #define CONFIG_CMD_PING 618 #define CONFIG_CMD_SETEXPR 619 #define CONFIG_CMD_REGINFO 620 621 #ifdef CONFIG_PCI 622 #define CONFIG_CMD_PCI 623 #define CONFIG_CMD_NET 624 #endif 625 626 /* 627 * USB 628 */ 629 #define CONFIG_HAS_FSL_DR_USB 630 #define CONFIG_HAS_FSL_MPH_USB 631 632 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 633 #define CONFIG_CMD_USB 634 #define CONFIG_USB_STORAGE 635 #define CONFIG_USB_EHCI 636 #define CONFIG_USB_EHCI_FSL 637 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 638 #define CONFIG_CMD_EXT2 639 #endif 640 641 #ifdef CONFIG_MMC 642 #define CONFIG_FSL_ESDHC 643 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 644 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 645 #define CONFIG_CMD_MMC 646 #define CONFIG_GENERIC_MMC 647 #define CONFIG_CMD_EXT2 648 #define CONFIG_CMD_FAT 649 #define CONFIG_DOS_PARTITION 650 #endif 651 652 /* Hash command with SHA acceleration supported in hardware */ 653 #ifdef CONFIG_FSL_CAAM 654 #define CONFIG_CMD_HASH 655 #define CONFIG_SHA_HW_ACCEL 656 #endif 657 658 /* 659 * Miscellaneous configurable options 660 */ 661 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 662 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 663 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 664 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 665 #ifdef CONFIG_CMD_KGDB 666 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 667 #else 668 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 669 #endif 670 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 671 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 672 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 673 674 /* 675 * For booting Linux, the board info and command line data 676 * have to be in the first 64 MB of memory, since this is 677 * the maximum mapped by the Linux kernel during initialization. 678 */ 679 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 680 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 681 682 #ifdef CONFIG_CMD_KGDB 683 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 684 #endif 685 686 /* 687 * Environment Configuration 688 */ 689 #define CONFIG_ROOTPATH "/opt/nfsroot" 690 #define CONFIG_BOOTFILE "uImage" 691 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 692 693 /* default location for tftp and bootm */ 694 #define CONFIG_LOADADDR 1000000 695 696 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 697 698 #define CONFIG_BAUDRATE 115200 699 700 #ifdef CONFIG_P4080DS 701 #define __USB_PHY_TYPE ulpi 702 #else 703 #define __USB_PHY_TYPE utmi 704 #endif 705 706 #define CONFIG_EXTRA_ENV_SETTINGS \ 707 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 708 "bank_intlv=cs0_cs1;" \ 709 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 710 "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 711 "netdev=eth0\0" \ 712 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 713 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 714 "tftpflash=tftpboot $loadaddr $uboot && " \ 715 "protect off $ubootaddr +$filesize && " \ 716 "erase $ubootaddr +$filesize && " \ 717 "cp.b $loadaddr $ubootaddr $filesize && " \ 718 "protect on $ubootaddr +$filesize && " \ 719 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 720 "consoledev=ttyS0\0" \ 721 "ramdiskaddr=2000000\0" \ 722 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 723 "fdtaddr=c00000\0" \ 724 "fdtfile=p4080ds/p4080ds.dtb\0" \ 725 "bdev=sda3\0" 726 727 #define CONFIG_HDBOOT \ 728 "setenv bootargs root=/dev/$bdev rw " \ 729 "console=$consoledev,$baudrate $othbootargs;" \ 730 "tftp $loadaddr $bootfile;" \ 731 "tftp $fdtaddr $fdtfile;" \ 732 "bootm $loadaddr - $fdtaddr" 733 734 #define CONFIG_NFSBOOTCOMMAND \ 735 "setenv bootargs root=/dev/nfs rw " \ 736 "nfsroot=$serverip:$rootpath " \ 737 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 738 "console=$consoledev,$baudrate $othbootargs;" \ 739 "tftp $loadaddr $bootfile;" \ 740 "tftp $fdtaddr $fdtfile;" \ 741 "bootm $loadaddr - $fdtaddr" 742 743 #define CONFIG_RAMBOOTCOMMAND \ 744 "setenv bootargs root=/dev/ram rw " \ 745 "console=$consoledev,$baudrate $othbootargs;" \ 746 "tftp $ramdiskaddr $ramdiskfile;" \ 747 "tftp $loadaddr $bootfile;" \ 748 "tftp $fdtaddr $fdtfile;" \ 749 "bootm $loadaddr $ramdiskaddr $fdtaddr" 750 751 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 752 753 #include <asm/fsl_secure_boot.h> 754 755 #ifdef CONFIG_SECURE_BOOT 756 #define CONFIG_CMD_BLOB 757 #endif 758 759 #endif /* __CONFIG_H */ 760