1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #include "../board/freescale/common/ics307_clk.h" 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 34 #endif 35 36 /* High Level Configuration Options */ 37 #define CONFIG_BOOKE 38 #define CONFIG_E500 /* BOOKE e500 family */ 39 #define CONFIG_E500MC /* BOOKE e500mc family */ 40 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 41 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 42 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 43 #define CONFIG_MP /* support multiple processors */ 44 45 #ifndef CONFIG_SYS_TEXT_BASE 46 #define CONFIG_SYS_TEXT_BASE 0xeff80000 47 #endif 48 49 #ifndef CONFIG_RESET_VECTOR_ADDRESS 50 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 51 #endif 52 53 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 54 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 55 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 56 #define CONFIG_PCI /* Enable PCI/PCIE */ 57 #define CONFIG_PCIE1 /* PCIE controler 1 */ 58 #define CONFIG_PCIE2 /* PCIE controler 2 */ 59 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 60 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 61 62 #define CONFIG_SYS_SRIO 63 #define CONFIG_SRIO1 /* SRIO port 1 */ 64 #define CONFIG_SRIO2 /* SRIO port 2 */ 65 66 #define CONFIG_FSL_LAW /* Use common FSL init code */ 67 68 #define CONFIG_ENV_OVERWRITE 69 70 #ifdef CONFIG_SYS_NO_FLASH 71 #define CONFIG_ENV_IS_NOWHERE 72 #else 73 #define CONFIG_FLASH_CFI_DRIVER 74 #define CONFIG_SYS_FLASH_CFI 75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 76 #endif 77 78 #if defined(CONFIG_SPIFLASH) 79 #define CONFIG_SYS_EXTRA_ENV_RELOC 80 #define CONFIG_ENV_IS_IN_SPI_FLASH 81 #define CONFIG_ENV_SPI_BUS 0 82 #define CONFIG_ENV_SPI_CS 0 83 #define CONFIG_ENV_SPI_MAX_HZ 10000000 84 #define CONFIG_ENV_SPI_MODE 0 85 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 86 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 87 #define CONFIG_ENV_SECT_SIZE 0x10000 88 #elif defined(CONFIG_SDCARD) 89 #define CONFIG_SYS_EXTRA_ENV_RELOC 90 #define CONFIG_ENV_IS_IN_MMC 91 #define CONFIG_FSL_FIXED_MMC_LOCATION 92 #define CONFIG_SYS_MMC_ENV_DEV 0 93 #define CONFIG_ENV_SIZE 0x2000 94 #define CONFIG_ENV_OFFSET (512 * 1097) 95 #elif defined(CONFIG_NAND) 96 #define CONFIG_SYS_EXTRA_ENV_RELOC 97 #define CONFIG_ENV_IS_IN_NAND 98 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 99 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 100 #else 101 #define CONFIG_ENV_IS_IN_FLASH 102 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 103 #define CONFIG_ENV_SIZE 0x2000 104 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 105 #endif 106 107 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 108 109 /* 110 * These can be toggled for performance analysis, otherwise use default. 111 */ 112 #define CONFIG_SYS_CACHE_STASHING 113 #define CONFIG_BACKSIDE_L2_CACHE 114 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 115 #define CONFIG_BTB /* toggle branch predition */ 116 #define CONFIG_DDR_ECC 117 #ifdef CONFIG_DDR_ECC 118 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 119 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 120 #endif 121 122 #define CONFIG_ENABLE_36BIT_PHYS 123 124 #ifdef CONFIG_PHYS_64BIT 125 #define CONFIG_ADDR_MAP 126 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 127 #endif 128 129 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 130 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 131 #define CONFIG_SYS_MEMTEST_END 0x00400000 132 #define CONFIG_SYS_ALT_MEMTEST 133 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 134 135 /* 136 * Config the L3 Cache as L3 SRAM 137 */ 138 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 139 #ifdef CONFIG_PHYS_64BIT 140 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 141 #else 142 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 143 #endif 144 #define CONFIG_SYS_L3_SIZE (1024 << 10) 145 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 146 147 #ifdef CONFIG_PHYS_64BIT 148 #define CONFIG_SYS_DCSRBAR 0xf0000000 149 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 150 #endif 151 152 /* EEPROM */ 153 #define CONFIG_ID_EEPROM 154 #define CONFIG_SYS_I2C_EEPROM_NXID 155 #define CONFIG_SYS_EEPROM_BUS_NUM 0 156 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 157 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 158 159 /* 160 * DDR Setup 161 */ 162 #define CONFIG_VERY_BIG_RAM 163 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 164 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 165 166 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 167 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 168 169 #define CONFIG_DDR_SPD 170 #define CONFIG_FSL_DDR3 171 172 #ifdef CONFIG_P3060QDS 173 #define CONFIG_SYS_SPD_BUS_NUM 0 174 #else 175 #define CONFIG_SYS_SPD_BUS_NUM 1 176 #endif 177 #define SPD_EEPROM_ADDRESS1 0x51 178 #define SPD_EEPROM_ADDRESS2 0x52 179 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 180 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 181 182 /* 183 * Local Bus Definitions 184 */ 185 186 /* Set the local bus clock 1/8 of platform clock */ 187 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 188 189 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 190 #ifdef CONFIG_PHYS_64BIT 191 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 192 #else 193 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 194 #endif 195 196 #define CONFIG_SYS_FLASH_BR_PRELIM \ 197 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 198 | BR_PS_16 | BR_V) 199 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 200 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 201 202 #define CONFIG_SYS_BR1_PRELIM \ 203 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 204 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 205 206 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 207 #ifdef CONFIG_PHYS_64BIT 208 #define PIXIS_BASE_PHYS 0xfffdf0000ull 209 #else 210 #define PIXIS_BASE_PHYS PIXIS_BASE 211 #endif 212 213 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 214 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 215 216 #define PIXIS_LBMAP_SWITCH 7 217 #define PIXIS_LBMAP_MASK 0xf0 218 #define PIXIS_LBMAP_SHIFT 4 219 #define PIXIS_LBMAP_ALTBANK 0x40 220 221 #define CONFIG_SYS_FLASH_QUIET_TEST 222 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 223 224 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 225 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 226 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 227 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 228 229 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 230 231 #if defined(CONFIG_RAMBOOT_PBL) 232 #define CONFIG_SYS_RAMBOOT 233 #endif 234 235 /* Nand Flash */ 236 #ifdef CONFIG_NAND_FSL_ELBC 237 #define CONFIG_SYS_NAND_BASE 0xffa00000 238 #ifdef CONFIG_PHYS_64BIT 239 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 240 #else 241 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 242 #endif 243 244 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 245 #define CONFIG_SYS_MAX_NAND_DEVICE 1 246 #define CONFIG_MTD_NAND_VERIFY_WRITE 247 #define CONFIG_CMD_NAND 248 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 249 250 /* NAND flash config */ 251 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 252 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 253 | BR_PS_8 /* Port Size = 8 bit */ \ 254 | BR_MS_FCM /* MSEL = FCM */ \ 255 | BR_V) /* valid */ 256 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 257 | OR_FCM_PGS /* Large Page*/ \ 258 | OR_FCM_CSCT \ 259 | OR_FCM_CST \ 260 | OR_FCM_CHT \ 261 | OR_FCM_SCY_1 \ 262 | OR_FCM_TRLX \ 263 | OR_FCM_EHTR) 264 265 #ifdef CONFIG_NAND 266 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 267 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 268 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 269 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 270 #else 271 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 272 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 273 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 274 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 275 #endif 276 #else 277 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 278 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 279 #endif /* CONFIG_NAND_FSL_ELBC */ 280 281 #define CONFIG_SYS_FLASH_EMPTY_INFO 282 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 283 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 284 285 #define CONFIG_BOARD_EARLY_INIT_F 286 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 287 #define CONFIG_MISC_INIT_R 288 289 #define CONFIG_HWCONFIG 290 291 /* define to use L1 as initial stack */ 292 #define CONFIG_L1_INIT_RAM 293 #define CONFIG_SYS_INIT_RAM_LOCK 294 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 295 #ifdef CONFIG_PHYS_64BIT 296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 298 /* The assembler doesn't like typecast */ 299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 300 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 301 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 302 #else 303 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 306 #endif 307 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 308 309 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 310 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 311 312 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 313 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 314 315 /* Serial Port - controlled on board with jumper J8 316 * open - index 2 317 * shorted - index 1 318 */ 319 #define CONFIG_CONS_INDEX 1 320 #define CONFIG_SYS_NS16550 321 #define CONFIG_SYS_NS16550_SERIAL 322 #define CONFIG_SYS_NS16550_REG_SIZE 1 323 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 324 325 #define CONFIG_SYS_BAUDRATE_TABLE \ 326 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 327 328 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 329 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 330 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 331 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 332 333 /* Use the HUSH parser */ 334 #define CONFIG_SYS_HUSH_PARSER 335 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 336 337 /* pass open firmware flat tree */ 338 #define CONFIG_OF_LIBFDT 339 #define CONFIG_OF_BOARD_SETUP 340 #define CONFIG_OF_STDOUT_VIA_ALIAS 341 342 /* new uImage format support */ 343 #define CONFIG_FIT 344 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 345 346 /* I2C */ 347 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 348 #define CONFIG_HARD_I2C /* I2C with hardware support */ 349 #define CONFIG_I2C_MULTI_BUS 350 #define CONFIG_I2C_CMD_TREE 351 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 352 #define CONFIG_SYS_I2C_SLAVE 0x7F 353 #define CONFIG_SYS_I2C_OFFSET 0x118000 354 #define CONFIG_SYS_I2C2_OFFSET 0x118100 355 356 /* 357 * RapidIO 358 */ 359 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 360 #ifdef CONFIG_PHYS_64BIT 361 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 362 #else 363 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 364 #endif 365 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 366 367 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 368 #ifdef CONFIG_PHYS_64BIT 369 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 370 #else 371 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 372 #endif 373 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 374 375 /* 376 * eSPI - Enhanced SPI 377 */ 378 #define CONFIG_FSL_ESPI 379 #define CONFIG_SPI_FLASH 380 #define CONFIG_SPI_FLASH_SPANSION 381 #define CONFIG_CMD_SF 382 #define CONFIG_SF_DEFAULT_SPEED 10000000 383 #define CONFIG_SF_DEFAULT_MODE 0 384 385 /* 386 * General PCI 387 * Memory space is mapped 1-1, but I/O space must start from 0. 388 */ 389 390 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 391 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 392 #ifdef CONFIG_PHYS_64BIT 393 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 394 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 395 #else 396 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 397 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 398 #endif 399 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 400 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 401 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 402 #ifdef CONFIG_PHYS_64BIT 403 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 404 #else 405 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 406 #endif 407 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 408 409 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 410 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 411 #ifdef CONFIG_PHYS_64BIT 412 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 413 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 414 #else 415 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 416 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 417 #endif 418 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 419 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 420 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 421 #ifdef CONFIG_PHYS_64BIT 422 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 423 #else 424 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 425 #endif 426 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 427 428 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 429 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 430 #ifdef CONFIG_PHYS_64BIT 431 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 432 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 433 #else 434 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 435 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 436 #endif 437 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 438 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 439 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 440 #ifdef CONFIG_PHYS_64BIT 441 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 442 #else 443 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 444 #endif 445 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 446 447 /* controller 4, Base address 203000 */ 448 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 449 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 450 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 451 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 452 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 453 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 454 455 /* Qman/Bman */ 456 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 457 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 458 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 459 #ifdef CONFIG_PHYS_64BIT 460 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 461 #else 462 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 463 #endif 464 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 465 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 466 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 467 #ifdef CONFIG_PHYS_64BIT 468 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 469 #else 470 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 471 #endif 472 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 473 474 #define CONFIG_SYS_DPAA_FMAN 475 #define CONFIG_SYS_DPAA_PME 476 /* Default address of microcode for the Linux Fman driver */ 477 #if defined(CONFIG_SPIFLASH) 478 /* 479 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 480 * env, so we got 0x110000. 481 */ 482 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 483 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 484 #elif defined(CONFIG_SDCARD) 485 /* 486 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 487 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 488 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 489 */ 490 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 491 #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) 492 #elif defined(CONFIG_NAND) 493 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 494 #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 495 #else 496 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 497 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 498 #endif 499 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 500 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 501 502 #ifdef CONFIG_SYS_DPAA_FMAN 503 #define CONFIG_FMAN_ENET 504 #define CONFIG_PHYLIB_10G 505 #define CONFIG_PHY_VITESSE 506 #define CONFIG_PHY_TERANETICS 507 #endif 508 509 #ifdef CONFIG_PCI 510 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 511 #define CONFIG_E1000 512 513 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 514 #define CONFIG_DOS_PARTITION 515 #endif /* CONFIG_PCI */ 516 517 /* SATA */ 518 #ifdef CONFIG_FSL_SATA_V2 519 #define CONFIG_LIBATA 520 #define CONFIG_FSL_SATA 521 522 #define CONFIG_SYS_SATA_MAX_DEVICE 2 523 #define CONFIG_SATA1 524 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 525 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 526 #define CONFIG_SATA2 527 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 528 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 529 530 #define CONFIG_LBA48 531 #define CONFIG_CMD_SATA 532 #define CONFIG_DOS_PARTITION 533 #define CONFIG_CMD_EXT2 534 #endif 535 536 #ifdef CONFIG_FMAN_ENET 537 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 538 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 539 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 540 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 541 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 542 543 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 544 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 545 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 546 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 547 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 548 549 #define CONFIG_SYS_TBIPA_VALUE 8 550 #define CONFIG_MII /* MII PHY management */ 551 #define CONFIG_ETHPRIME "FM1@DTSEC1" 552 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 553 #endif 554 555 /* 556 * Environment 557 */ 558 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 559 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 560 561 /* 562 * Command line configuration. 563 */ 564 #include <config_cmd_default.h> 565 566 #define CONFIG_CMD_DHCP 567 #define CONFIG_CMD_ELF 568 #define CONFIG_CMD_ERRATA 569 #define CONFIG_CMD_GREPENV 570 #define CONFIG_CMD_IRQ 571 #define CONFIG_CMD_I2C 572 #define CONFIG_CMD_MII 573 #define CONFIG_CMD_PING 574 #define CONFIG_CMD_SETEXPR 575 #define CONFIG_CMD_REGINFO 576 577 #ifdef CONFIG_PCI 578 #define CONFIG_CMD_PCI 579 #define CONFIG_CMD_NET 580 #endif 581 582 /* 583 * USB 584 */ 585 #define CONFIG_CMD_USB 586 #define CONFIG_USB_STORAGE 587 #define CONFIG_USB_EHCI 588 #define CONFIG_USB_EHCI_FSL 589 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 590 #define CONFIG_CMD_EXT2 591 #define CONFIG_HAS_FSL_DR_USB 592 593 #ifdef CONFIG_MMC 594 #define CONFIG_FSL_ESDHC 595 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 596 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 597 #define CONFIG_CMD_MMC 598 #define CONFIG_GENERIC_MMC 599 #define CONFIG_CMD_EXT2 600 #define CONFIG_CMD_FAT 601 #define CONFIG_DOS_PARTITION 602 #endif 603 604 /* 605 * Miscellaneous configurable options 606 */ 607 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 608 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 609 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 610 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 611 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 612 #ifdef CONFIG_CMD_KGDB 613 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 614 #else 615 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 616 #endif 617 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 618 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 619 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 620 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 621 622 /* 623 * For booting Linux, the board info and command line data 624 * have to be in the first 64 MB of memory, since this is 625 * the maximum mapped by the Linux kernel during initialization. 626 */ 627 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 628 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 629 630 #ifdef CONFIG_CMD_KGDB 631 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 632 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 633 #endif 634 635 /* 636 * Environment Configuration 637 */ 638 #define CONFIG_ROOTPATH "/opt/nfsroot" 639 #define CONFIG_BOOTFILE "uImage" 640 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 641 642 /* default location for tftp and bootm */ 643 #define CONFIG_LOADADDR 1000000 644 645 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 646 647 #define CONFIG_BAUDRATE 115200 648 649 #if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS) 650 #define __USB_PHY_TYPE ulpi 651 #else 652 #define __USB_PHY_TYPE utmi 653 #endif 654 655 #define CONFIG_EXTRA_ENV_SETTINGS \ 656 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 657 "bank_intlv=cs0_cs1;" \ 658 "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\ 659 "netdev=eth0\0" \ 660 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 661 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 662 "tftpflash=tftpboot $loadaddr $uboot && " \ 663 "protect off $ubootaddr +$filesize && " \ 664 "erase $ubootaddr +$filesize && " \ 665 "cp.b $loadaddr $ubootaddr $filesize && " \ 666 "protect on $ubootaddr +$filesize && " \ 667 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 668 "consoledev=ttyS0\0" \ 669 "ramdiskaddr=2000000\0" \ 670 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 671 "fdtaddr=c00000\0" \ 672 "fdtfile=p4080ds/p4080ds.dtb\0" \ 673 "bdev=sda3\0" \ 674 "c=ffe\0" 675 676 #define CONFIG_HDBOOT \ 677 "setenv bootargs root=/dev/$bdev rw " \ 678 "console=$consoledev,$baudrate $othbootargs;" \ 679 "tftp $loadaddr $bootfile;" \ 680 "tftp $fdtaddr $fdtfile;" \ 681 "bootm $loadaddr - $fdtaddr" 682 683 #define CONFIG_NFSBOOTCOMMAND \ 684 "setenv bootargs root=/dev/nfs rw " \ 685 "nfsroot=$serverip:$rootpath " \ 686 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 687 "console=$consoledev,$baudrate $othbootargs;" \ 688 "tftp $loadaddr $bootfile;" \ 689 "tftp $fdtaddr $fdtfile;" \ 690 "bootm $loadaddr - $fdtaddr" 691 692 #define CONFIG_RAMBOOTCOMMAND \ 693 "setenv bootargs root=/dev/ram rw " \ 694 "console=$consoledev,$baudrate $othbootargs;" \ 695 "tftp $ramdiskaddr $ramdiskfile;" \ 696 "tftp $loadaddr $bootfile;" \ 697 "tftp $fdtaddr $fdtfile;" \ 698 "bootm $loadaddr $ramdiskaddr $fdtaddr" 699 700 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 701 702 #ifdef CONFIG_SECURE_BOOT 703 #include <asm/fsl_secure_boot.h> 704 #endif 705 706 #endif /* __CONFIG_H */ 707