1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #include "../board/freescale/common/ics307_clk.h" 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 34 #endif 35 36 #ifdef CONFIG_SRIOBOOT_SLAVE 37 /* Set 1M boot space */ 38 #define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 39 #define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \ 40 (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR) 41 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 42 #define CONFIG_SYS_NO_FLASH 43 #endif 44 45 /* High Level Configuration Options */ 46 #define CONFIG_BOOKE 47 #define CONFIG_E500 /* BOOKE e500 family */ 48 #define CONFIG_E500MC /* BOOKE e500mc family */ 49 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 50 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 51 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 52 #define CONFIG_MP /* support multiple processors */ 53 54 #ifndef CONFIG_SYS_TEXT_BASE 55 #define CONFIG_SYS_TEXT_BASE 0xeff80000 56 #endif 57 58 #ifndef CONFIG_RESET_VECTOR_ADDRESS 59 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 60 #endif 61 62 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 63 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 64 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 65 #define CONFIG_PCI /* Enable PCI/PCIE */ 66 #define CONFIG_PCIE1 /* PCIE controler 1 */ 67 #define CONFIG_PCIE2 /* PCIE controler 2 */ 68 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 69 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 70 71 #define CONFIG_SYS_SRIO 72 #define CONFIG_SRIO1 /* SRIO port 1 */ 73 #define CONFIG_SRIO2 /* SRIO port 2 */ 74 75 #define CONFIG_FSL_LAW /* Use common FSL init code */ 76 77 #define CONFIG_ENV_OVERWRITE 78 79 #ifdef CONFIG_SYS_NO_FLASH 80 #ifndef CONFIG_SRIOBOOT_SLAVE 81 #define CONFIG_ENV_IS_NOWHERE 82 #endif 83 #else 84 #define CONFIG_FLASH_CFI_DRIVER 85 #define CONFIG_SYS_FLASH_CFI 86 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 87 #endif 88 89 #if defined(CONFIG_SPIFLASH) 90 #define CONFIG_SYS_EXTRA_ENV_RELOC 91 #define CONFIG_ENV_IS_IN_SPI_FLASH 92 #define CONFIG_ENV_SPI_BUS 0 93 #define CONFIG_ENV_SPI_CS 0 94 #define CONFIG_ENV_SPI_MAX_HZ 10000000 95 #define CONFIG_ENV_SPI_MODE 0 96 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 97 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 98 #define CONFIG_ENV_SECT_SIZE 0x10000 99 #elif defined(CONFIG_SDCARD) 100 #define CONFIG_SYS_EXTRA_ENV_RELOC 101 #define CONFIG_ENV_IS_IN_MMC 102 #define CONFIG_FSL_FIXED_MMC_LOCATION 103 #define CONFIG_SYS_MMC_ENV_DEV 0 104 #define CONFIG_ENV_SIZE 0x2000 105 #define CONFIG_ENV_OFFSET (512 * 1097) 106 #elif defined(CONFIG_NAND) 107 #define CONFIG_SYS_EXTRA_ENV_RELOC 108 #define CONFIG_ENV_IS_IN_NAND 109 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 110 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 111 #elif defined(CONFIG_SRIOBOOT_SLAVE) 112 #define CONFIG_ENV_IS_IN_REMOTE 113 #define CONFIG_ENV_ADDR 0xffe20000 114 #define CONFIG_ENV_SIZE 0x2000 115 #elif defined(CONFIG_ENV_IS_NOWHERE) 116 #define CONFIG_ENV_SIZE 0x2000 117 #else 118 #define CONFIG_ENV_IS_IN_FLASH 119 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 120 #define CONFIG_ENV_SIZE 0x2000 121 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 122 #endif 123 124 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 125 126 /* 127 * These can be toggled for performance analysis, otherwise use default. 128 */ 129 #define CONFIG_SYS_CACHE_STASHING 130 #define CONFIG_BACKSIDE_L2_CACHE 131 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 132 #define CONFIG_BTB /* toggle branch predition */ 133 #define CONFIG_DDR_ECC 134 #ifdef CONFIG_DDR_ECC 135 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 136 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 137 #endif 138 139 #define CONFIG_ENABLE_36BIT_PHYS 140 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_ADDR_MAP 143 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 144 #endif 145 146 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 147 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 148 #define CONFIG_SYS_MEMTEST_END 0x00400000 149 #define CONFIG_SYS_ALT_MEMTEST 150 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 151 152 /* 153 * Config the L3 Cache as L3 SRAM 154 */ 155 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 156 #ifdef CONFIG_PHYS_64BIT 157 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 158 #else 159 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 160 #endif 161 #define CONFIG_SYS_L3_SIZE (1024 << 10) 162 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 163 164 #ifdef CONFIG_PHYS_64BIT 165 #define CONFIG_SYS_DCSRBAR 0xf0000000 166 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 167 #endif 168 169 /* EEPROM */ 170 #define CONFIG_ID_EEPROM 171 #define CONFIG_SYS_I2C_EEPROM_NXID 172 #define CONFIG_SYS_EEPROM_BUS_NUM 0 173 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 174 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 175 176 /* 177 * DDR Setup 178 */ 179 #define CONFIG_VERY_BIG_RAM 180 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 181 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 182 183 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 184 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 185 186 #define CONFIG_DDR_SPD 187 #define CONFIG_FSL_DDR3 188 189 #ifdef CONFIG_P3060QDS 190 #define CONFIG_SYS_SPD_BUS_NUM 0 191 #else 192 #define CONFIG_SYS_SPD_BUS_NUM 1 193 #endif 194 #define SPD_EEPROM_ADDRESS1 0x51 195 #define SPD_EEPROM_ADDRESS2 0x52 196 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 197 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 198 199 /* 200 * Local Bus Definitions 201 */ 202 203 /* Set the local bus clock 1/8 of platform clock */ 204 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 205 206 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 207 #ifdef CONFIG_PHYS_64BIT 208 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 209 #else 210 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 211 #endif 212 213 #define CONFIG_SYS_FLASH_BR_PRELIM \ 214 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 215 | BR_PS_16 | BR_V) 216 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 217 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 218 219 #define CONFIG_SYS_BR1_PRELIM \ 220 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 221 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 222 223 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 224 #ifdef CONFIG_PHYS_64BIT 225 #define PIXIS_BASE_PHYS 0xfffdf0000ull 226 #else 227 #define PIXIS_BASE_PHYS PIXIS_BASE 228 #endif 229 230 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 231 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 232 233 #define PIXIS_LBMAP_SWITCH 7 234 #define PIXIS_LBMAP_MASK 0xf0 235 #define PIXIS_LBMAP_SHIFT 4 236 #define PIXIS_LBMAP_ALTBANK 0x40 237 238 #define CONFIG_SYS_FLASH_QUIET_TEST 239 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 240 241 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 242 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 243 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 244 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 245 246 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 247 248 #if defined(CONFIG_RAMBOOT_PBL) 249 #define CONFIG_SYS_RAMBOOT 250 #endif 251 252 /* Nand Flash */ 253 #ifdef CONFIG_NAND_FSL_ELBC 254 #define CONFIG_SYS_NAND_BASE 0xffa00000 255 #ifdef CONFIG_PHYS_64BIT 256 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 257 #else 258 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 259 #endif 260 261 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 262 #define CONFIG_SYS_MAX_NAND_DEVICE 1 263 #define CONFIG_MTD_NAND_VERIFY_WRITE 264 #define CONFIG_CMD_NAND 265 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 266 267 /* NAND flash config */ 268 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 269 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 270 | BR_PS_8 /* Port Size = 8 bit */ \ 271 | BR_MS_FCM /* MSEL = FCM */ \ 272 | BR_V) /* valid */ 273 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 274 | OR_FCM_PGS /* Large Page*/ \ 275 | OR_FCM_CSCT \ 276 | OR_FCM_CST \ 277 | OR_FCM_CHT \ 278 | OR_FCM_SCY_1 \ 279 | OR_FCM_TRLX \ 280 | OR_FCM_EHTR) 281 282 #ifdef CONFIG_NAND 283 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 284 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 285 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 286 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 287 #else 288 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 289 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 290 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 291 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 292 #endif 293 #else 294 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 295 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 296 #endif /* CONFIG_NAND_FSL_ELBC */ 297 298 #define CONFIG_SYS_FLASH_EMPTY_INFO 299 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 300 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 301 302 #define CONFIG_BOARD_EARLY_INIT_F 303 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 304 #define CONFIG_MISC_INIT_R 305 306 #define CONFIG_HWCONFIG 307 308 /* define to use L1 as initial stack */ 309 #define CONFIG_L1_INIT_RAM 310 #define CONFIG_SYS_INIT_RAM_LOCK 311 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 312 #ifdef CONFIG_PHYS_64BIT 313 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 314 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 315 /* The assembler doesn't like typecast */ 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 317 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 318 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 319 #else 320 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 321 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 322 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 323 #endif 324 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 325 326 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 327 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 328 329 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 330 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 331 332 /* Serial Port - controlled on board with jumper J8 333 * open - index 2 334 * shorted - index 1 335 */ 336 #define CONFIG_CONS_INDEX 1 337 #define CONFIG_SYS_NS16550 338 #define CONFIG_SYS_NS16550_SERIAL 339 #define CONFIG_SYS_NS16550_REG_SIZE 1 340 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 341 342 #define CONFIG_SYS_BAUDRATE_TABLE \ 343 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 344 345 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 346 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 347 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 348 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 349 350 /* Use the HUSH parser */ 351 #define CONFIG_SYS_HUSH_PARSER 352 353 /* pass open firmware flat tree */ 354 #define CONFIG_OF_LIBFDT 355 #define CONFIG_OF_BOARD_SETUP 356 #define CONFIG_OF_STDOUT_VIA_ALIAS 357 358 /* new uImage format support */ 359 #define CONFIG_FIT 360 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 361 362 /* I2C */ 363 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 364 #define CONFIG_HARD_I2C /* I2C with hardware support */ 365 #define CONFIG_I2C_MULTI_BUS 366 #define CONFIG_I2C_CMD_TREE 367 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 368 #define CONFIG_SYS_I2C_SLAVE 0x7F 369 #define CONFIG_SYS_I2C_OFFSET 0x118000 370 #define CONFIG_SYS_I2C2_OFFSET 0x118100 371 372 /* 373 * RapidIO 374 */ 375 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 376 #ifdef CONFIG_PHYS_64BIT 377 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 378 #else 379 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 380 #endif 381 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 382 383 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 384 #ifdef CONFIG_PHYS_64BIT 385 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 386 #else 387 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 388 #endif 389 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 390 391 /* 392 * SRIOBOOT - MASTER 393 */ 394 #ifdef CONFIG_SRIOBOOT_MASTER 395 /* master port for srioboot*/ 396 #define CONFIG_SRIOBOOT_MASTER_PORT 0 397 /* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */ 398 /* 399 * for slave u-boot IMAGE instored in master memory space, 400 * PHYS must be aligned based on the SIZE 401 */ 402 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull 403 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull 404 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000 /* 512K */ 405 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull 406 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull 407 /* 408 * for slave UCODE instored in master memory space, 409 * PHYS must be aligned based on the SIZE 410 */ 411 #define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull 412 #define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull 413 #define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000 /* 64K */ 414 /* 415 * for slave ENV instored in master memory space, 416 * PHYS must be aligned based on the SIZE 417 */ 418 #define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull 419 #define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull 420 #define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */ 421 /* slave core release by master*/ 422 #define CONFIG_SRIOBOOT_SLAVE_HOLDOFF 423 #define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4 424 #define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */ 425 #endif 426 427 /* 428 * SRIOBOOT - SLAVE 429 */ 430 #ifdef CONFIG_SRIOBOOT_SLAVE 431 /* slave port for srioboot */ 432 #define CONFIG_SRIOBOOT_SLAVE_PORT0 433 /* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */ 434 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000 435 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \ 436 (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR) 437 #endif 438 439 /* 440 * eSPI - Enhanced SPI 441 */ 442 #define CONFIG_FSL_ESPI 443 #define CONFIG_SPI_FLASH 444 #define CONFIG_SPI_FLASH_SPANSION 445 #define CONFIG_CMD_SF 446 #define CONFIG_SF_DEFAULT_SPEED 10000000 447 #define CONFIG_SF_DEFAULT_MODE 0 448 449 /* 450 * General PCI 451 * Memory space is mapped 1-1, but I/O space must start from 0. 452 */ 453 454 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 455 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 456 #ifdef CONFIG_PHYS_64BIT 457 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 458 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 459 #else 460 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 461 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 462 #endif 463 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 464 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 465 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 466 #ifdef CONFIG_PHYS_64BIT 467 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 468 #else 469 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 470 #endif 471 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 472 473 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 474 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 475 #ifdef CONFIG_PHYS_64BIT 476 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 477 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 478 #else 479 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 480 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 481 #endif 482 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 483 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 484 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 485 #ifdef CONFIG_PHYS_64BIT 486 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 487 #else 488 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 489 #endif 490 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 491 492 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 493 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 494 #ifdef CONFIG_PHYS_64BIT 495 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 496 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 497 #else 498 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 499 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 500 #endif 501 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 502 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 503 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 504 #ifdef CONFIG_PHYS_64BIT 505 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 506 #else 507 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 508 #endif 509 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 510 511 /* controller 4, Base address 203000 */ 512 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 513 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 514 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 515 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 516 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 517 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 518 519 /* Qman/Bman */ 520 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 521 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 522 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 523 #ifdef CONFIG_PHYS_64BIT 524 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 525 #else 526 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 527 #endif 528 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 529 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 530 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 531 #ifdef CONFIG_PHYS_64BIT 532 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 533 #else 534 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 535 #endif 536 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 537 538 #define CONFIG_SYS_DPAA_FMAN 539 #define CONFIG_SYS_DPAA_PME 540 /* Default address of microcode for the Linux Fman driver */ 541 #if defined(CONFIG_SPIFLASH) 542 /* 543 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 544 * env, so we got 0x110000. 545 */ 546 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 547 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 548 #elif defined(CONFIG_SDCARD) 549 /* 550 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 551 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 552 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 553 */ 554 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 555 #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) 556 #elif defined(CONFIG_NAND) 557 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 558 #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 559 #elif defined(CONFIG_SRIOBOOT_SLAVE) 560 /* 561 * Slave has no ucode locally, it can fetch this from remote. When implementing 562 * in two corenet boards, slave's ucode could be stored in master's memory 563 * space, the address can be mapped from slave TLB->slave LAW-> 564 * slave SRIO outbound window->master inbound window->master LAW-> 565 * the ucode address in master's NOR flash. 566 */ 567 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 568 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 569 #else 570 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 571 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 572 #endif 573 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 574 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 575 576 #ifdef CONFIG_SYS_DPAA_FMAN 577 #define CONFIG_FMAN_ENET 578 #define CONFIG_PHYLIB_10G 579 #define CONFIG_PHY_VITESSE 580 #define CONFIG_PHY_TERANETICS 581 #endif 582 583 #ifdef CONFIG_PCI 584 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 585 #define CONFIG_E1000 586 587 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 588 #define CONFIG_DOS_PARTITION 589 #endif /* CONFIG_PCI */ 590 591 /* SATA */ 592 #ifdef CONFIG_FSL_SATA_V2 593 #define CONFIG_LIBATA 594 #define CONFIG_FSL_SATA 595 596 #define CONFIG_SYS_SATA_MAX_DEVICE 2 597 #define CONFIG_SATA1 598 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 599 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 600 #define CONFIG_SATA2 601 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 602 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 603 604 #define CONFIG_LBA48 605 #define CONFIG_CMD_SATA 606 #define CONFIG_DOS_PARTITION 607 #define CONFIG_CMD_EXT2 608 #endif 609 610 #ifdef CONFIG_FMAN_ENET 611 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 612 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 613 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 614 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 615 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 616 617 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 618 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 619 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 620 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 621 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 622 623 #define CONFIG_SYS_TBIPA_VALUE 8 624 #define CONFIG_MII /* MII PHY management */ 625 #define CONFIG_ETHPRIME "FM1@DTSEC1" 626 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 627 #endif 628 629 /* 630 * Environment 631 */ 632 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 633 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 634 635 /* 636 * Command line configuration. 637 */ 638 #include <config_cmd_default.h> 639 640 #define CONFIG_CMD_DHCP 641 #define CONFIG_CMD_ELF 642 #define CONFIG_CMD_ERRATA 643 #define CONFIG_CMD_GREPENV 644 #define CONFIG_CMD_IRQ 645 #define CONFIG_CMD_I2C 646 #define CONFIG_CMD_MII 647 #define CONFIG_CMD_PING 648 #define CONFIG_CMD_SETEXPR 649 #define CONFIG_CMD_REGINFO 650 651 #ifdef CONFIG_PCI 652 #define CONFIG_CMD_PCI 653 #define CONFIG_CMD_NET 654 #endif 655 656 /* 657 * USB 658 */ 659 #define CONFIG_CMD_USB 660 #define CONFIG_USB_STORAGE 661 #define CONFIG_USB_EHCI 662 #define CONFIG_USB_EHCI_FSL 663 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 664 #define CONFIG_CMD_EXT2 665 #define CONFIG_HAS_FSL_DR_USB 666 667 #ifdef CONFIG_MMC 668 #define CONFIG_FSL_ESDHC 669 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 670 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 671 #define CONFIG_CMD_MMC 672 #define CONFIG_GENERIC_MMC 673 #define CONFIG_CMD_EXT2 674 #define CONFIG_CMD_FAT 675 #define CONFIG_DOS_PARTITION 676 #endif 677 678 /* 679 * Miscellaneous configurable options 680 */ 681 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 682 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 683 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 684 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 685 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 686 #ifdef CONFIG_CMD_KGDB 687 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 688 #else 689 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 690 #endif 691 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 692 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 693 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 694 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 695 696 /* 697 * For booting Linux, the board info and command line data 698 * have to be in the first 64 MB of memory, since this is 699 * the maximum mapped by the Linux kernel during initialization. 700 */ 701 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 702 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 703 704 #ifdef CONFIG_CMD_KGDB 705 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 706 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 707 #endif 708 709 /* 710 * Environment Configuration 711 */ 712 #define CONFIG_ROOTPATH "/opt/nfsroot" 713 #define CONFIG_BOOTFILE "uImage" 714 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 715 716 /* default location for tftp and bootm */ 717 #define CONFIG_LOADADDR 1000000 718 719 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 720 721 #define CONFIG_BAUDRATE 115200 722 723 #if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS) 724 #define __USB_PHY_TYPE ulpi 725 #else 726 #define __USB_PHY_TYPE utmi 727 #endif 728 729 #define CONFIG_EXTRA_ENV_SETTINGS \ 730 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 731 "bank_intlv=cs0_cs1;" \ 732 "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\ 733 "netdev=eth0\0" \ 734 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 735 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 736 "tftpflash=tftpboot $loadaddr $uboot && " \ 737 "protect off $ubootaddr +$filesize && " \ 738 "erase $ubootaddr +$filesize && " \ 739 "cp.b $loadaddr $ubootaddr $filesize && " \ 740 "protect on $ubootaddr +$filesize && " \ 741 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 742 "consoledev=ttyS0\0" \ 743 "ramdiskaddr=2000000\0" \ 744 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 745 "fdtaddr=c00000\0" \ 746 "fdtfile=p4080ds/p4080ds.dtb\0" \ 747 "bdev=sda3\0" \ 748 "c=ffe\0" 749 750 #define CONFIG_HDBOOT \ 751 "setenv bootargs root=/dev/$bdev rw " \ 752 "console=$consoledev,$baudrate $othbootargs;" \ 753 "tftp $loadaddr $bootfile;" \ 754 "tftp $fdtaddr $fdtfile;" \ 755 "bootm $loadaddr - $fdtaddr" 756 757 #define CONFIG_NFSBOOTCOMMAND \ 758 "setenv bootargs root=/dev/nfs rw " \ 759 "nfsroot=$serverip:$rootpath " \ 760 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 761 "console=$consoledev,$baudrate $othbootargs;" \ 762 "tftp $loadaddr $bootfile;" \ 763 "tftp $fdtaddr $fdtfile;" \ 764 "bootm $loadaddr - $fdtaddr" 765 766 #define CONFIG_RAMBOOTCOMMAND \ 767 "setenv bootargs root=/dev/ram rw " \ 768 "console=$consoledev,$baudrate $othbootargs;" \ 769 "tftp $ramdiskaddr $ramdiskfile;" \ 770 "tftp $loadaddr $bootfile;" \ 771 "tftp $fdtaddr $fdtfile;" \ 772 "bootm $loadaddr $ramdiskaddr $fdtaddr" 773 774 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 775 776 #ifdef CONFIG_SECURE_BOOT 777 #include <asm/fsl_secure_boot.h> 778 #endif 779 780 #endif /* __CONFIG_H */ 781