1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #include "../board/freescale/common/ics307_clk.h" 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 34 #endif 35 36 /* High Level Configuration Options */ 37 #define CONFIG_BOOKE 38 #define CONFIG_E500 /* BOOKE e500 family */ 39 #define CONFIG_E500MC /* BOOKE e500mc family */ 40 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 41 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 42 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 43 #define CONFIG_MP /* support multiple processors */ 44 45 #ifndef CONFIG_SYS_TEXT_BASE 46 #define CONFIG_SYS_TEXT_BASE 0xeff80000 47 #endif 48 49 #ifndef CONFIG_RESET_VECTOR_ADDRESS 50 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 51 #endif 52 53 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 54 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 55 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 56 #define CONFIG_PCI /* Enable PCI/PCIE */ 57 #define CONFIG_PCIE1 /* PCIE controler 1 */ 58 #define CONFIG_PCIE2 /* PCIE controler 2 */ 59 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 60 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 61 62 #define CONFIG_SYS_SRIO 63 #define CONFIG_SRIO1 /* SRIO port 1 */ 64 #define CONFIG_SRIO2 /* SRIO port 2 */ 65 66 #define CONFIG_FSL_LAW /* Use common FSL init code */ 67 68 #define CONFIG_ENV_OVERWRITE 69 70 #ifdef CONFIG_SYS_NO_FLASH 71 #define CONFIG_ENV_IS_NOWHERE 72 #else 73 #define CONFIG_FLASH_CFI_DRIVER 74 #define CONFIG_SYS_FLASH_CFI 75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 76 #endif 77 78 #if defined(CONFIG_SPIFLASH) 79 #define CONFIG_SYS_EXTRA_ENV_RELOC 80 #define CONFIG_ENV_IS_IN_SPI_FLASH 81 #define CONFIG_ENV_SPI_BUS 0 82 #define CONFIG_ENV_SPI_CS 0 83 #define CONFIG_ENV_SPI_MAX_HZ 10000000 84 #define CONFIG_ENV_SPI_MODE 0 85 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 86 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 87 #define CONFIG_ENV_SECT_SIZE 0x10000 88 #elif defined(CONFIG_SDCARD) 89 #define CONFIG_SYS_EXTRA_ENV_RELOC 90 #define CONFIG_ENV_IS_IN_MMC 91 #define CONFIG_SYS_MMC_ENV_DEV 0 92 #define CONFIG_ENV_SIZE 0x2000 93 #define CONFIG_ENV_OFFSET (512 * 1097) 94 #elif defined(CONFIG_NAND) 95 #define CONFIG_SYS_EXTRA_ENV_RELOC 96 #define CONFIG_ENV_IS_IN_NAND 97 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 98 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 99 #else 100 #define CONFIG_ENV_IS_IN_FLASH 101 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 102 #define CONFIG_ENV_SIZE 0x2000 103 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 104 #endif 105 106 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 107 108 /* 109 * These can be toggled for performance analysis, otherwise use default. 110 */ 111 #define CONFIG_SYS_CACHE_STASHING 112 #define CONFIG_BACKSIDE_L2_CACHE 113 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 114 #define CONFIG_BTB /* toggle branch predition */ 115 #define CONFIG_DDR_ECC 116 #ifdef CONFIG_DDR_ECC 117 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 118 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 119 #endif 120 121 #define CONFIG_ENABLE_36BIT_PHYS 122 123 #ifdef CONFIG_PHYS_64BIT 124 #define CONFIG_ADDR_MAP 125 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 126 #endif 127 128 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 129 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 130 #define CONFIG_SYS_MEMTEST_END 0x00400000 131 #define CONFIG_SYS_ALT_MEMTEST 132 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 133 134 /* 135 * Config the L3 Cache as L3 SRAM 136 */ 137 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 138 #ifdef CONFIG_PHYS_64BIT 139 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 140 #else 141 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 142 #endif 143 #define CONFIG_SYS_L3_SIZE (1024 << 10) 144 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 145 146 #ifdef CONFIG_PHYS_64BIT 147 #define CONFIG_SYS_DCSRBAR 0xf0000000 148 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 149 #endif 150 151 /* EEPROM */ 152 #define CONFIG_ID_EEPROM 153 #define CONFIG_SYS_I2C_EEPROM_NXID 154 #define CONFIG_SYS_EEPROM_BUS_NUM 0 155 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 156 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 157 158 /* 159 * DDR Setup 160 */ 161 #define CONFIG_VERY_BIG_RAM 162 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 163 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 164 165 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 166 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 167 168 #define CONFIG_DDR_SPD 169 #define CONFIG_FSL_DDR3 170 171 #define CONFIG_SYS_SPD_BUS_NUM 1 172 #define SPD_EEPROM_ADDRESS1 0x51 173 #define SPD_EEPROM_ADDRESS2 0x52 174 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 175 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 176 177 /* 178 * Local Bus Definitions 179 */ 180 181 /* Set the local bus clock 1/8 of platform clock */ 182 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 183 184 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 185 #ifdef CONFIG_PHYS_64BIT 186 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 187 #else 188 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 189 #endif 190 191 #define CONFIG_SYS_FLASH_BR_PRELIM \ 192 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 193 | BR_PS_16 | BR_V) 194 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 195 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 196 197 #define CONFIG_SYS_BR1_PRELIM \ 198 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 199 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 200 201 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 202 #ifdef CONFIG_PHYS_64BIT 203 #define PIXIS_BASE_PHYS 0xfffdf0000ull 204 #else 205 #define PIXIS_BASE_PHYS PIXIS_BASE 206 #endif 207 208 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 209 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 210 211 #define PIXIS_LBMAP_SWITCH 7 212 #define PIXIS_LBMAP_MASK 0xf0 213 #define PIXIS_LBMAP_SHIFT 4 214 #define PIXIS_LBMAP_ALTBANK 0x40 215 216 #define CONFIG_SYS_FLASH_QUIET_TEST 217 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 218 219 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 220 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 221 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 222 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 223 224 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 225 226 #if defined(CONFIG_RAMBOOT_PBL) 227 #define CONFIG_SYS_RAMBOOT 228 #endif 229 230 /* Nand Flash */ 231 #ifdef CONFIG_NAND_FSL_ELBC 232 #define CONFIG_SYS_NAND_BASE 0xffa00000 233 #ifdef CONFIG_PHYS_64BIT 234 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 235 #else 236 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 237 #endif 238 239 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 240 #define CONFIG_SYS_MAX_NAND_DEVICE 1 241 #define CONFIG_MTD_NAND_VERIFY_WRITE 242 #define CONFIG_CMD_NAND 243 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 244 245 /* NAND flash config */ 246 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 247 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 248 | BR_PS_8 /* Port Size = 8 bit */ \ 249 | BR_MS_FCM /* MSEL = FCM */ \ 250 | BR_V) /* valid */ 251 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 252 | OR_FCM_PGS /* Large Page*/ \ 253 | OR_FCM_CSCT \ 254 | OR_FCM_CST \ 255 | OR_FCM_CHT \ 256 | OR_FCM_SCY_1 \ 257 | OR_FCM_TRLX \ 258 | OR_FCM_EHTR) 259 260 #ifdef CONFIG_NAND 261 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 262 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 263 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 264 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 265 #else 266 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 267 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 268 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 269 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 270 #endif 271 #else 272 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 273 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 274 #endif /* CONFIG_NAND_FSL_ELBC */ 275 276 #define CONFIG_SYS_FLASH_EMPTY_INFO 277 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 278 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 279 280 #define CONFIG_BOARD_EARLY_INIT_F 281 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 282 #define CONFIG_MISC_INIT_R 283 284 #define CONFIG_HWCONFIG 285 286 /* define to use L1 as initial stack */ 287 #define CONFIG_L1_INIT_RAM 288 #define CONFIG_SYS_INIT_RAM_LOCK 289 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 290 #ifdef CONFIG_PHYS_64BIT 291 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 292 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 293 /* The assembler doesn't like typecast */ 294 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 295 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 296 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 297 #else 298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 300 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 301 #endif 302 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 303 304 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 305 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 306 307 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 308 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 309 310 /* Serial Port - controlled on board with jumper J8 311 * open - index 2 312 * shorted - index 1 313 */ 314 #define CONFIG_CONS_INDEX 1 315 #define CONFIG_SYS_NS16550 316 #define CONFIG_SYS_NS16550_SERIAL 317 #define CONFIG_SYS_NS16550_REG_SIZE 1 318 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 319 320 #define CONFIG_SYS_BAUDRATE_TABLE \ 321 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 322 323 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 324 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 325 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 326 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 327 328 /* Use the HUSH parser */ 329 #define CONFIG_SYS_HUSH_PARSER 330 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 331 332 /* pass open firmware flat tree */ 333 #define CONFIG_OF_LIBFDT 334 #define CONFIG_OF_BOARD_SETUP 335 #define CONFIG_OF_STDOUT_VIA_ALIAS 336 337 /* new uImage format support */ 338 #define CONFIG_FIT 339 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 340 341 /* I2C */ 342 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 343 #define CONFIG_HARD_I2C /* I2C with hardware support */ 344 #define CONFIG_I2C_MULTI_BUS 345 #define CONFIG_I2C_CMD_TREE 346 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 347 #define CONFIG_SYS_I2C_SLAVE 0x7F 348 #define CONFIG_SYS_I2C_OFFSET 0x118000 349 #define CONFIG_SYS_I2C2_OFFSET 0x118100 350 351 /* 352 * RapidIO 353 */ 354 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 355 #ifdef CONFIG_PHYS_64BIT 356 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 357 #else 358 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 359 #endif 360 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 361 362 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 363 #ifdef CONFIG_PHYS_64BIT 364 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 365 #else 366 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 367 #endif 368 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 369 370 /* 371 * eSPI - Enhanced SPI 372 */ 373 #define CONFIG_FSL_ESPI 374 #define CONFIG_SPI_FLASH 375 #define CONFIG_SPI_FLASH_SPANSION 376 #define CONFIG_CMD_SF 377 #define CONFIG_SF_DEFAULT_SPEED 10000000 378 #define CONFIG_SF_DEFAULT_MODE 0 379 380 /* 381 * General PCI 382 * Memory space is mapped 1-1, but I/O space must start from 0. 383 */ 384 385 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 386 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 387 #ifdef CONFIG_PHYS_64BIT 388 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 389 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 390 #else 391 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 392 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 393 #endif 394 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 395 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 396 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 397 #ifdef CONFIG_PHYS_64BIT 398 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 399 #else 400 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 401 #endif 402 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 403 404 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 405 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 406 #ifdef CONFIG_PHYS_64BIT 407 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 408 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 409 #else 410 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 411 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 412 #endif 413 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 414 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 415 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 416 #ifdef CONFIG_PHYS_64BIT 417 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 418 #else 419 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 420 #endif 421 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 422 423 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 424 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 427 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 428 #else 429 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 430 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 431 #endif 432 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 433 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 434 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 435 #ifdef CONFIG_PHYS_64BIT 436 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 437 #else 438 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 439 #endif 440 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 441 442 /* controller 4, Base address 203000 */ 443 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 444 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 445 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 446 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 447 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 448 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 449 450 /* Qman/Bman */ 451 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 452 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 453 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 454 #ifdef CONFIG_PHYS_64BIT 455 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 456 #else 457 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 458 #endif 459 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 460 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 461 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 462 #ifdef CONFIG_PHYS_64BIT 463 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 464 #else 465 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 466 #endif 467 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 468 469 #define CONFIG_SYS_DPAA_FMAN 470 #define CONFIG_SYS_DPAA_PME 471 /* Default address of microcode for the Linux Fman driver */ 472 #if defined(CONFIG_SPIFLASH) 473 /* 474 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 475 * env, so we got 0x110000. 476 */ 477 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 0x110000 478 #elif defined(CONFIG_SDCARD) 479 /* 480 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 481 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 482 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 483 */ 484 #define CONFIG_SYS_QE_FW_IN_MMC (512 * 1130) 485 #elif defined(CONFIG_NAND) 486 #define CONFIG_SYS_QE_FW_IN_NAND (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 487 #else 488 #define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 489 #endif 490 #define CONFIG_SYS_FMAN_FW_LENGTH 0x10000 491 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH) 492 493 #ifdef CONFIG_SYS_DPAA_FMAN 494 #define CONFIG_FMAN_ENET 495 #define CONFIG_PHYLIB_10G 496 #define CONFIG_PHY_VITESSE 497 #define CONFIG_PHY_TERANETICS 498 #endif 499 500 #ifdef CONFIG_PCI 501 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 502 #define CONFIG_E1000 503 504 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 505 #define CONFIG_DOS_PARTITION 506 #endif /* CONFIG_PCI */ 507 508 /* SATA */ 509 #ifdef CONFIG_FSL_SATA_V2 510 #define CONFIG_LIBATA 511 #define CONFIG_FSL_SATA 512 513 #define CONFIG_SYS_SATA_MAX_DEVICE 2 514 #define CONFIG_SATA1 515 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 516 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 517 #define CONFIG_SATA2 518 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 519 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 520 521 #define CONFIG_LBA48 522 #define CONFIG_CMD_SATA 523 #define CONFIG_DOS_PARTITION 524 #define CONFIG_CMD_EXT2 525 #endif 526 527 #ifdef CONFIG_FMAN_ENET 528 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 529 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 530 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 531 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 532 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 533 534 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 535 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 536 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 537 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 538 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 539 540 #define CONFIG_SYS_TBIPA_VALUE 8 541 #define CONFIG_MII /* MII PHY management */ 542 #define CONFIG_ETHPRIME "FM1@DTSEC1" 543 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 544 #endif 545 546 /* 547 * Environment 548 */ 549 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 550 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 551 552 /* 553 * Command line configuration. 554 */ 555 #include <config_cmd_default.h> 556 557 #define CONFIG_CMD_DHCP 558 #define CONFIG_CMD_ELF 559 #define CONFIG_CMD_ERRATA 560 #define CONFIG_CMD_GREPENV 561 #define CONFIG_CMD_IRQ 562 #define CONFIG_CMD_I2C 563 #define CONFIG_CMD_MII 564 #define CONFIG_CMD_PING 565 #define CONFIG_CMD_SETEXPR 566 #define CONFIG_CMD_REGINFO 567 568 #ifdef CONFIG_PCI 569 #define CONFIG_CMD_PCI 570 #define CONFIG_CMD_NET 571 #endif 572 573 /* 574 * USB 575 */ 576 #define CONFIG_CMD_USB 577 #define CONFIG_USB_STORAGE 578 #define CONFIG_USB_EHCI 579 #define CONFIG_USB_EHCI_FSL 580 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 581 #define CONFIG_CMD_EXT2 582 #define CONFIG_HAS_FSL_DR_USB 583 584 #ifdef CONFIG_MMC 585 #define CONFIG_FSL_ESDHC 586 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 587 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 588 #define CONFIG_CMD_MMC 589 #define CONFIG_GENERIC_MMC 590 #define CONFIG_CMD_EXT2 591 #define CONFIG_CMD_FAT 592 #define CONFIG_DOS_PARTITION 593 #endif 594 595 /* 596 * Miscellaneous configurable options 597 */ 598 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 599 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 600 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 601 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 602 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 603 #ifdef CONFIG_CMD_KGDB 604 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 605 #else 606 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 607 #endif 608 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 609 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 610 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 611 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 612 613 /* 614 * For booting Linux, the board info and command line data 615 * have to be in the first 64 MB of memory, since this is 616 * the maximum mapped by the Linux kernel during initialization. 617 */ 618 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 619 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 620 621 #ifdef CONFIG_CMD_KGDB 622 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 623 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 624 #endif 625 626 /* 627 * Environment Configuration 628 */ 629 #define CONFIG_ROOTPATH /opt/nfsroot 630 #define CONFIG_BOOTFILE uImage 631 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 632 633 /* default location for tftp and bootm */ 634 #define CONFIG_LOADADDR 1000000 635 636 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 637 638 #define CONFIG_BAUDRATE 115200 639 640 #if defined(CONFIG_P4080DS) 641 #define __USB_PHY_TYPE ulpi 642 #else 643 #define __USB_PHY_TYPE utmi 644 #endif 645 646 #define CONFIG_EXTRA_ENV_SETTINGS \ 647 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 648 "bank_intlv=cs0_cs1;" \ 649 "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\ 650 "netdev=eth0\0" \ 651 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 652 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 653 "tftpflash=tftpboot $loadaddr $uboot && " \ 654 "protect off $ubootaddr +$filesize && " \ 655 "erase $ubootaddr +$filesize && " \ 656 "cp.b $loadaddr $ubootaddr $filesize && " \ 657 "protect on $ubootaddr +$filesize && " \ 658 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 659 "consoledev=ttyS0\0" \ 660 "ramdiskaddr=2000000\0" \ 661 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 662 "fdtaddr=c00000\0" \ 663 "fdtfile=p4080ds/p4080ds.dtb\0" \ 664 "bdev=sda3\0" \ 665 "c=ffe\0" 666 667 #define CONFIG_HDBOOT \ 668 "setenv bootargs root=/dev/$bdev rw " \ 669 "console=$consoledev,$baudrate $othbootargs;" \ 670 "tftp $loadaddr $bootfile;" \ 671 "tftp $fdtaddr $fdtfile;" \ 672 "bootm $loadaddr - $fdtaddr" 673 674 #define CONFIG_NFSBOOTCOMMAND \ 675 "setenv bootargs root=/dev/nfs rw " \ 676 "nfsroot=$serverip:$rootpath " \ 677 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 678 "console=$consoledev,$baudrate $othbootargs;" \ 679 "tftp $loadaddr $bootfile;" \ 680 "tftp $fdtaddr $fdtfile;" \ 681 "bootm $loadaddr - $fdtaddr" 682 683 #define CONFIG_RAMBOOTCOMMAND \ 684 "setenv bootargs root=/dev/ram rw " \ 685 "console=$consoledev,$baudrate $othbootargs;" \ 686 "tftp $ramdiskaddr $ramdiskfile;" \ 687 "tftp $loadaddr $bootfile;" \ 688 "tftp $fdtaddr $fdtfile;" \ 689 "bootm $loadaddr $ramdiskaddr $fdtaddr" 690 691 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 692 693 #ifdef CONFIG_SECURE_BOOT 694 #include <asm/fsl_secure_boot.h> 695 #endif 696 697 #endif /* __CONFIG_H */ 698