1 /* 2 * Copyright 2009-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Corenet DS style board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_DISPLAY_BOARDINFO 14 15 #include "../board/freescale/common/ics307_clk.h" 16 17 #ifdef CONFIG_RAMBOOT_PBL 18 #ifdef CONFIG_SECURE_BOOT 19 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 20 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 21 #ifdef CONFIG_NAND 22 #define CONFIG_RAMBOOT_NAND 23 #endif 24 #define CONFIG_BOOTSCRIPT_COPY_RAM 25 #else 26 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 27 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 28 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg 29 #if defined(CONFIG_P3041DS) 30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg 31 #elif defined(CONFIG_P4080DS) 32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg 33 #elif defined(CONFIG_P5020DS) 34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg 35 #elif defined(CONFIG_P5040DS) 36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg 37 #endif 38 #endif 39 #endif 40 41 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 42 /* Set 1M boot space */ 43 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 45 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 46 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 47 #define CONFIG_SYS_NO_FLASH 48 #endif 49 50 /* High Level Configuration Options */ 51 #define CONFIG_BOOKE 52 #define CONFIG_E500 /* BOOKE e500 family */ 53 #define CONFIG_E500MC /* BOOKE e500mc family */ 54 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 55 #define CONFIG_MP /* support multiple processors */ 56 57 #ifndef CONFIG_SYS_TEXT_BASE 58 #define CONFIG_SYS_TEXT_BASE 0xeff40000 59 #endif 60 61 #ifndef CONFIG_RESET_VECTOR_ADDRESS 62 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 63 #endif 64 65 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 66 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 67 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 68 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 69 #define CONFIG_PCI /* Enable PCI/PCIE */ 70 #define CONFIG_PCIE1 /* PCIE controler 1 */ 71 #define CONFIG_PCIE2 /* PCIE controler 2 */ 72 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 73 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 74 75 #define CONFIG_FSL_LAW /* Use common FSL init code */ 76 77 #define CONFIG_ENV_OVERWRITE 78 79 #ifdef CONFIG_SYS_NO_FLASH 80 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 81 #define CONFIG_ENV_IS_NOWHERE 82 #endif 83 #else 84 #define CONFIG_FLASH_CFI_DRIVER 85 #define CONFIG_SYS_FLASH_CFI 86 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 87 #endif 88 89 #if defined(CONFIG_SPIFLASH) 90 #define CONFIG_SYS_EXTRA_ENV_RELOC 91 #define CONFIG_ENV_IS_IN_SPI_FLASH 92 #define CONFIG_ENV_SPI_BUS 0 93 #define CONFIG_ENV_SPI_CS 0 94 #define CONFIG_ENV_SPI_MAX_HZ 10000000 95 #define CONFIG_ENV_SPI_MODE 0 96 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 97 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 98 #define CONFIG_ENV_SECT_SIZE 0x10000 99 #elif defined(CONFIG_SDCARD) 100 #define CONFIG_SYS_EXTRA_ENV_RELOC 101 #define CONFIG_ENV_IS_IN_MMC 102 #define CONFIG_FSL_FIXED_MMC_LOCATION 103 #define CONFIG_SYS_MMC_ENV_DEV 0 104 #define CONFIG_ENV_SIZE 0x2000 105 #define CONFIG_ENV_OFFSET (512 * 1658) 106 #elif defined(CONFIG_NAND) 107 #define CONFIG_SYS_EXTRA_ENV_RELOC 108 #define CONFIG_ENV_IS_IN_NAND 109 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 110 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 111 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 112 #define CONFIG_ENV_IS_IN_REMOTE 113 #define CONFIG_ENV_ADDR 0xffe20000 114 #define CONFIG_ENV_SIZE 0x2000 115 #elif defined(CONFIG_ENV_IS_NOWHERE) 116 #define CONFIG_ENV_SIZE 0x2000 117 #else 118 #define CONFIG_ENV_IS_IN_FLASH 119 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 120 #define CONFIG_ENV_SIZE 0x2000 121 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 122 #endif 123 124 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 125 126 /* 127 * These can be toggled for performance analysis, otherwise use default. 128 */ 129 #define CONFIG_SYS_CACHE_STASHING 130 #define CONFIG_BACKSIDE_L2_CACHE 131 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 132 #define CONFIG_BTB /* toggle branch predition */ 133 #define CONFIG_DDR_ECC 134 #ifdef CONFIG_DDR_ECC 135 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 136 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 137 #endif 138 139 #define CONFIG_ENABLE_36BIT_PHYS 140 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_ADDR_MAP 143 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 144 #endif 145 146 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 147 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 148 #define CONFIG_SYS_MEMTEST_END 0x00400000 149 #define CONFIG_SYS_ALT_MEMTEST 150 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 151 152 /* 153 * Config the L3 Cache as L3 SRAM 154 */ 155 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 156 #ifdef CONFIG_PHYS_64BIT 157 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 158 #else 159 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 160 #endif 161 #define CONFIG_SYS_L3_SIZE (1024 << 10) 162 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 163 164 #ifdef CONFIG_PHYS_64BIT 165 #define CONFIG_SYS_DCSRBAR 0xf0000000 166 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 167 #endif 168 169 /* EEPROM */ 170 #define CONFIG_ID_EEPROM 171 #define CONFIG_SYS_I2C_EEPROM_NXID 172 #define CONFIG_SYS_EEPROM_BUS_NUM 0 173 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 174 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 175 176 /* 177 * DDR Setup 178 */ 179 #define CONFIG_VERY_BIG_RAM 180 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 181 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 182 183 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 184 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 185 186 #define CONFIG_DDR_SPD 187 #define CONFIG_SYS_FSL_DDR3 188 189 #define CONFIG_SYS_SPD_BUS_NUM 1 190 #define SPD_EEPROM_ADDRESS1 0x51 191 #define SPD_EEPROM_ADDRESS2 0x52 192 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 193 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 194 195 /* 196 * Local Bus Definitions 197 */ 198 199 /* Set the local bus clock 1/8 of platform clock */ 200 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 201 202 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 203 #ifdef CONFIG_PHYS_64BIT 204 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 205 #else 206 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 207 #endif 208 209 #define CONFIG_SYS_FLASH_BR_PRELIM \ 210 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \ 211 | BR_PS_16 | BR_V) 212 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 213 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 214 215 #define CONFIG_SYS_BR1_PRELIM \ 216 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 217 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 218 219 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 220 #ifdef CONFIG_PHYS_64BIT 221 #define PIXIS_BASE_PHYS 0xfffdf0000ull 222 #else 223 #define PIXIS_BASE_PHYS PIXIS_BASE 224 #endif 225 226 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 227 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 228 229 #define PIXIS_LBMAP_SWITCH 7 230 #define PIXIS_LBMAP_MASK 0xf0 231 #define PIXIS_LBMAP_SHIFT 4 232 #define PIXIS_LBMAP_ALTBANK 0x40 233 234 #define CONFIG_SYS_FLASH_QUIET_TEST 235 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 236 237 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 238 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 239 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 240 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 241 242 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 243 244 #if defined(CONFIG_RAMBOOT_PBL) 245 #define CONFIG_SYS_RAMBOOT 246 #endif 247 248 /* Nand Flash */ 249 #ifdef CONFIG_NAND_FSL_ELBC 250 #define CONFIG_SYS_NAND_BASE 0xffa00000 251 #ifdef CONFIG_PHYS_64BIT 252 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 253 #else 254 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 255 #endif 256 257 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 258 #define CONFIG_SYS_MAX_NAND_DEVICE 1 259 #define CONFIG_CMD_NAND 260 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 261 262 /* NAND flash config */ 263 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 264 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 265 | BR_PS_8 /* Port Size = 8 bit */ \ 266 | BR_MS_FCM /* MSEL = FCM */ \ 267 | BR_V) /* valid */ 268 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 269 | OR_FCM_PGS /* Large Page*/ \ 270 | OR_FCM_CSCT \ 271 | OR_FCM_CST \ 272 | OR_FCM_CHT \ 273 | OR_FCM_SCY_1 \ 274 | OR_FCM_TRLX \ 275 | OR_FCM_EHTR) 276 277 #ifdef CONFIG_NAND 278 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 279 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 280 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 281 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 282 #else 283 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 284 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 285 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 286 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 287 #endif 288 #else 289 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 290 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 291 #endif /* CONFIG_NAND_FSL_ELBC */ 292 293 #define CONFIG_SYS_FLASH_EMPTY_INFO 294 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 295 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 296 297 #define CONFIG_BOARD_EARLY_INIT_F 298 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 299 #define CONFIG_MISC_INIT_R 300 301 #define CONFIG_HWCONFIG 302 303 /* define to use L1 as initial stack */ 304 #define CONFIG_L1_INIT_RAM 305 #define CONFIG_SYS_INIT_RAM_LOCK 306 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 307 #ifdef CONFIG_PHYS_64BIT 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 310 /* The assembler doesn't like typecast */ 311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 312 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 313 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 314 #else 315 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 317 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 318 #endif 319 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 320 321 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 322 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 323 324 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 325 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 326 327 /* Serial Port - controlled on board with jumper J8 328 * open - index 2 329 * shorted - index 1 330 */ 331 #define CONFIG_CONS_INDEX 1 332 #define CONFIG_SYS_NS16550_SERIAL 333 #define CONFIG_SYS_NS16550_REG_SIZE 1 334 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 335 336 #define CONFIG_SYS_BAUDRATE_TABLE \ 337 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 338 339 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 340 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 341 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 342 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 343 344 /* Use the HUSH parser */ 345 #define CONFIG_SYS_HUSH_PARSER 346 347 /* pass open firmware flat tree */ 348 #define CONFIG_OF_LIBFDT 349 #define CONFIG_OF_BOARD_SETUP 350 #define CONFIG_OF_STDOUT_VIA_ALIAS 351 352 /* new uImage format support */ 353 #define CONFIG_FIT 354 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 355 356 /* I2C */ 357 #define CONFIG_SYS_I2C 358 #define CONFIG_SYS_I2C_FSL 359 #define CONFIG_SYS_FSL_I2C_SPEED 400000 360 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 361 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 362 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 363 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 364 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 365 366 /* 367 * RapidIO 368 */ 369 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 370 #ifdef CONFIG_PHYS_64BIT 371 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 372 #else 373 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 374 #endif 375 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 376 377 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 378 #ifdef CONFIG_PHYS_64BIT 379 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 380 #else 381 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 382 #endif 383 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 384 385 /* 386 * for slave u-boot IMAGE instored in master memory space, 387 * PHYS must be aligned based on the SIZE 388 */ 389 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 390 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 391 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 392 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 393 /* 394 * for slave UCODE and ENV instored in master memory space, 395 * PHYS must be aligned based on the SIZE 396 */ 397 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 398 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 399 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 400 401 /* slave core release by master*/ 402 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 403 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 404 405 /* 406 * SRIO_PCIE_BOOT - SLAVE 407 */ 408 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 409 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 410 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 411 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 412 #endif 413 414 /* 415 * eSPI - Enhanced SPI 416 */ 417 #define CONFIG_CMD_SF 418 #define CONFIG_SF_DEFAULT_SPEED 10000000 419 #define CONFIG_SF_DEFAULT_MODE 0 420 421 /* 422 * General PCI 423 * Memory space is mapped 1-1, but I/O space must start from 0. 424 */ 425 426 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 427 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 428 #ifdef CONFIG_PHYS_64BIT 429 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 430 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 431 #else 432 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 433 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 434 #endif 435 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 436 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 437 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 438 #ifdef CONFIG_PHYS_64BIT 439 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 440 #else 441 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 442 #endif 443 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 444 445 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 446 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 447 #ifdef CONFIG_PHYS_64BIT 448 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 449 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 450 #else 451 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 452 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 453 #endif 454 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 455 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 456 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 457 #ifdef CONFIG_PHYS_64BIT 458 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 459 #else 460 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 461 #endif 462 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 463 464 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 465 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 466 #ifdef CONFIG_PHYS_64BIT 467 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 468 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 469 #else 470 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 471 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 472 #endif 473 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 474 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 475 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 476 #ifdef CONFIG_PHYS_64BIT 477 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 478 #else 479 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 480 #endif 481 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 482 483 /* controller 4, Base address 203000 */ 484 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 485 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 486 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 487 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 488 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 489 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 490 491 /* Qman/Bman */ 492 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 493 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 494 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 495 #ifdef CONFIG_PHYS_64BIT 496 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 497 #else 498 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 499 #endif 500 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 501 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 502 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 503 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 504 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 505 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 506 CONFIG_SYS_BMAN_CENA_SIZE) 507 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 508 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 509 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 510 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 511 #ifdef CONFIG_PHYS_64BIT 512 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 513 #else 514 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 515 #endif 516 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 517 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 518 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 519 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 520 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 521 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 522 CONFIG_SYS_QMAN_CENA_SIZE) 523 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 524 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 525 526 #define CONFIG_SYS_DPAA_FMAN 527 #define CONFIG_SYS_DPAA_PME 528 /* Default address of microcode for the Linux Fman driver */ 529 #if defined(CONFIG_SPIFLASH) 530 /* 531 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 532 * env, so we got 0x110000. 533 */ 534 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 535 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 536 #elif defined(CONFIG_SDCARD) 537 /* 538 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 539 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 540 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 541 */ 542 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 543 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 544 #elif defined(CONFIG_NAND) 545 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 546 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 547 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 548 /* 549 * Slave has no ucode locally, it can fetch this from remote. When implementing 550 * in two corenet boards, slave's ucode could be stored in master's memory 551 * space, the address can be mapped from slave TLB->slave LAW-> 552 * slave SRIO or PCIE outbound window->master inbound window-> 553 * master LAW->the ucode address in master's memory space. 554 */ 555 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 556 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 557 #else 558 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 559 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 560 #endif 561 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 562 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 563 564 #ifdef CONFIG_SYS_DPAA_FMAN 565 #define CONFIG_FMAN_ENET 566 #define CONFIG_PHYLIB_10G 567 #define CONFIG_PHY_VITESSE 568 #define CONFIG_PHY_TERANETICS 569 #endif 570 571 #ifdef CONFIG_PCI 572 #define CONFIG_PCI_INDIRECT_BRIDGE 573 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 574 575 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 576 #define CONFIG_DOS_PARTITION 577 #endif /* CONFIG_PCI */ 578 579 /* SATA */ 580 #ifdef CONFIG_FSL_SATA_V2 581 #define CONFIG_LIBATA 582 #define CONFIG_FSL_SATA 583 584 #define CONFIG_SYS_SATA_MAX_DEVICE 2 585 #define CONFIG_SATA1 586 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 587 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 588 #define CONFIG_SATA2 589 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 590 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 591 592 #define CONFIG_LBA48 593 #define CONFIG_CMD_SATA 594 #define CONFIG_DOS_PARTITION 595 #define CONFIG_CMD_EXT2 596 #endif 597 598 #ifdef CONFIG_FMAN_ENET 599 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 600 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 601 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 602 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 603 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 604 605 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 606 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 607 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 608 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 609 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 610 611 #define CONFIG_SYS_TBIPA_VALUE 8 612 #define CONFIG_MII /* MII PHY management */ 613 #define CONFIG_ETHPRIME "FM1@DTSEC1" 614 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 615 #endif 616 617 /* 618 * Environment 619 */ 620 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 621 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 622 623 /* 624 * Command line configuration. 625 */ 626 #define CONFIG_CMD_DHCP 627 #define CONFIG_CMD_ERRATA 628 #define CONFIG_CMD_GREPENV 629 #define CONFIG_CMD_IRQ 630 #define CONFIG_CMD_I2C 631 #define CONFIG_CMD_MII 632 #define CONFIG_CMD_PING 633 #define CONFIG_CMD_REGINFO 634 635 #ifdef CONFIG_PCI 636 #define CONFIG_CMD_PCI 637 #endif 638 639 /* 640 * USB 641 */ 642 #define CONFIG_HAS_FSL_DR_USB 643 #define CONFIG_HAS_FSL_MPH_USB 644 645 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 646 #define CONFIG_CMD_USB 647 #define CONFIG_USB_STORAGE 648 #define CONFIG_USB_EHCI 649 #define CONFIG_USB_EHCI_FSL 650 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 651 #define CONFIG_CMD_EXT2 652 #endif 653 654 #ifdef CONFIG_MMC 655 #define CONFIG_FSL_ESDHC 656 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 657 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 658 #define CONFIG_CMD_MMC 659 #define CONFIG_GENERIC_MMC 660 #define CONFIG_CMD_EXT2 661 #define CONFIG_CMD_FAT 662 #define CONFIG_DOS_PARTITION 663 #endif 664 665 /* Hash command with SHA acceleration supported in hardware */ 666 #ifdef CONFIG_FSL_CAAM 667 #define CONFIG_CMD_HASH 668 #define CONFIG_SHA_HW_ACCEL 669 #endif 670 671 /* 672 * Miscellaneous configurable options 673 */ 674 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 675 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 676 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 677 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 678 #ifdef CONFIG_CMD_KGDB 679 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 680 #else 681 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 682 #endif 683 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 684 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 685 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 686 687 /* 688 * For booting Linux, the board info and command line data 689 * have to be in the first 64 MB of memory, since this is 690 * the maximum mapped by the Linux kernel during initialization. 691 */ 692 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 693 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 694 695 #ifdef CONFIG_CMD_KGDB 696 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 697 #endif 698 699 /* 700 * Environment Configuration 701 */ 702 #define CONFIG_ROOTPATH "/opt/nfsroot" 703 #define CONFIG_BOOTFILE "uImage" 704 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 705 706 /* default location for tftp and bootm */ 707 #define CONFIG_LOADADDR 1000000 708 709 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 710 711 #define CONFIG_BAUDRATE 115200 712 713 #ifdef CONFIG_P4080DS 714 #define __USB_PHY_TYPE ulpi 715 #else 716 #define __USB_PHY_TYPE utmi 717 #endif 718 719 #define CONFIG_EXTRA_ENV_SETTINGS \ 720 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 721 "bank_intlv=cs0_cs1;" \ 722 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 723 "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 724 "netdev=eth0\0" \ 725 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 726 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 727 "tftpflash=tftpboot $loadaddr $uboot && " \ 728 "protect off $ubootaddr +$filesize && " \ 729 "erase $ubootaddr +$filesize && " \ 730 "cp.b $loadaddr $ubootaddr $filesize && " \ 731 "protect on $ubootaddr +$filesize && " \ 732 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 733 "consoledev=ttyS0\0" \ 734 "ramdiskaddr=2000000\0" \ 735 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 736 "fdtaddr=c00000\0" \ 737 "fdtfile=p4080ds/p4080ds.dtb\0" \ 738 "bdev=sda3\0" 739 740 #define CONFIG_HDBOOT \ 741 "setenv bootargs root=/dev/$bdev rw " \ 742 "console=$consoledev,$baudrate $othbootargs;" \ 743 "tftp $loadaddr $bootfile;" \ 744 "tftp $fdtaddr $fdtfile;" \ 745 "bootm $loadaddr - $fdtaddr" 746 747 #define CONFIG_NFSBOOTCOMMAND \ 748 "setenv bootargs root=/dev/nfs rw " \ 749 "nfsroot=$serverip:$rootpath " \ 750 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 751 "console=$consoledev,$baudrate $othbootargs;" \ 752 "tftp $loadaddr $bootfile;" \ 753 "tftp $fdtaddr $fdtfile;" \ 754 "bootm $loadaddr - $fdtaddr" 755 756 #define CONFIG_RAMBOOTCOMMAND \ 757 "setenv bootargs root=/dev/ram rw " \ 758 "console=$consoledev,$baudrate $othbootargs;" \ 759 "tftp $ramdiskaddr $ramdiskfile;" \ 760 "tftp $loadaddr $bootfile;" \ 761 "tftp $fdtaddr $fdtfile;" \ 762 "bootm $loadaddr $ramdiskaddr $fdtaddr" 763 764 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 765 766 #include <asm/fsl_secure_boot.h> 767 768 #ifdef CONFIG_SECURE_BOOT 769 #define CONFIG_CMD_BLOB 770 #endif 771 772 #endif /* __CONFIG_H */ 773